Hope This is ok with the MODs

Its been due for a while:

http://zinge.co.uk/

Woot!

Please feel free to leave c&c for me here (any bugs etc)

Cheers

Kit

Please feel free to wish for any and all bits - Any that take my fancy will make it into th shop at some point.

Works In progress:
Pouches and holsters
Engine
Orky six shooters

Projects that will be done: (hopefully)
Large Mutant Pirate Accessories - Hats, Guns, Swords & squarrots????

Forum Suggestions for consideration:
Tank Optics
Tank Comms
Mech bot (multipart)
Double Barrelled Shotgun
Power Fist/Klaw Alternatives

Nice products, made a test order.

- Set of 5 Wire Wrapped Power Cables 375mm
- Set of 5 Flexible Resin Power Cables
- Large Bulkhead Door

Bugs:
"State/County required"
Not many countries have states/counties.
- I used "n/a" to get past this requirement.

Postage cost:
The info claims: "International Delivery (order value: £0.00 to £14.99) Cost: £2.00"
- I was only charged £1.50.

Regards/
Magnus, Sweden

Thanks for the order and thanks for the headsup

You have got some interesting stuff. That cable could find a home in a few of my projects.

You'll be bookmarked!

Interesting things you've come up with there, I wish you success!

Yep ill be ordering some cable in the week . nice start what are you planing on adding ?

current WIPs are

Fans small, medium & large
Pistols
Grills
Modular tank track system

Loads more bubbling at the back of my mind

Looks good, I'll give it a try I think, the cables look very useful.

You've missed a d in spend in:
Free International Shipping - just spen £15 or more

Keep up the good work and I look forward to seeing your fans.

Can i sugest stuff like coms/optics equipment for tanks/apc's stuff like that

as there are a lot of 3rd party sites offering infantry based stuff but i think parts catering to tanks/mechs/flyers would do well
it mite even be worth setting up a poll on here to see what demand is for stuff ?

one thing that i think would do well is some kind of resin generic bot/ small mech thats multi part and is basic so people can scuplt kit bash there own parts to it ?

oh and plasticard sheet and tubes and stuff like rivets and brass etch and greenstuff would be good i know theres sites that sell this but its allways nice to be able to get stuff in one go

Few questions.

Can the semi clear ammo belts be painted? They look kinda non stick so how well do they take paint?
Is it possible to order and of your kits in larger lengths?
Like if I wanted to make some ammo belts for a stompa or something, could I get 20cm worth of ammo belts or are you stuck with 5cm max?

How does the custom decal thing work and how much does it cost? Do I create an image and then you just print it on paper or do you create an image similar to something I describe or send a picture of?

Do you have any plans to add 28mm ammo backpacks to go with your ammo belts?

Id really like to add an ammo belt and backpack to this minigun from maxmini

I think there'll be quite a few people looking for heavy bolter and bolter-sized ammo belts...*hint* *hint*
When (not if) this site gets up and gets more stuff in then I'll definitely buy some stuff...but until then, bookmarked!

Hi,

@ Madcowcrazy

All bits can be painted (see my meganob in the below link)
http://www.the-waaagh.com/forums/?showtopic=41457&st=20

Pretty much stuck with 5cm unless enough people demand larger sizes (making is no problem covering costs is another)

The vinyl decals are cut from 0.3mm vinyl not printed giving a relief image similar to GWs sheild designs - pics coming soon.

Price would depend on the quality of the item sent - i.e. decal from photo is expensive, decal from vector ar would be a lot cheaper prices to follow.

Back pack greens are done (its based on the minigun from predator film)

Cheers

Kit

My interest is piqued. The pictures are way, way too small for me to commit any money yet, though.

My advice:

1.) Take some much, much higher resolution pictures, even if you need to borrow someone's camera to do so. 1600x1200 should be the target.
2.) The backgrounds are too busy. Don't take pictures atop a paint spattered cutting mat. Use some white paper, instead.
3.) Some painted up examples on finished models for scale would really help.

The wrapped wire power cables are available free everywhere. just find your local music shop and ask for them to share the old wire guitar strings that they have. they just throw them out. tell em you use them for art. its what i did. i have about 30 ft of different sized cables now. save your cash when it comes to power couplings etc. just make em yourself.

@ouze - better pictures certainly - on models is tricky IP problems? Don't know - wouldn't want to find out the wrong way either.

Ideas greatly appreciated on this bit

@sennacherib - I used to use guitar wire but then I made these and they are so much better - Guitar wire is spingy and tough to cut, these go where you want them to within reason. They also have a thicker wrapping than equivalent thickness guitar strings meaning more visible detail that does'nt get filled in with even a thin few layers of paint.

zinge wrote:@ouze - better pictures certainly - on models is tricky IP problems? Don't know - wouldn't want to find out the wrong way either.

Certainly, for the bits that are done in clear resin, you should at least spray them white or grey or something, as it's hard to tell what they actually look like, as is. I definitely could use some ammo belts for various projects and look forward to getting some from you, once I get a good feel for what they look like.

Hi Guys,
I have attached some pictures to show the larger belts painted.

I might now have to combine your belts and maximini's M60 to make a ram-MARBO model...I just need a rambo-style head...hmm...

Very nice.

Bookmarked.

Have you used to be on Ebay? I'm sure I have seen these exact same sets and pictures on ebay.

"Wire inserts for posability."
Does this mean there is a hole in the ammo belts you insert brass wire or some soft metal wire into so you can lock them into a position?

The minigun backpack ammo thing from Predator is exactly what I have been hoping someone would make
Really looking forwards to this.

Hi,
Yes that was me on ebay - testing the water.

The flexible resin items are cast with a wire insert which helps the belt keep the shape you want.

Love the ammo belts.

Just ordered your power cables, and both small and large ammo belts.
I'll post a review when I get them. You're already getting an A in my book as the free shipping from a start-up company is great

Oh well, aren't those ammo belts little gems on the internet !

Looks like a promising start

Dug some pics of my fans - mold not quite up to scratch on these.

Current set = 1 large, 6 medium & 6 small - £3 for the set.


Automatically Appended Next Post:
Yes better pics would be good and will be sorted at some point!

Ouze wrote:My interest is piqued. The pictures are way, way too small for me to commit any money yet, though.

My advice:

1.) Take some much, much higher resolution pictures, even if you need to borrow someone's camera to do so. 1600x1200 should be the target.
2.) The backgrounds are too busy. Don't take pictures atop a paint spattered cutting mat. Use some white paper, instead.
3.) Some painted up examples on finished models for scale would really help.

This.

And when announcing your company include pictures, people are lazy and many who read this thread won't even click your link.

That being said, good luck! More choices is good news for all of us!

Thanks for the advice - i hope to be upgrading my pictures fairly soon.

I have quite a few like the one attached but I doubt I can use it effectively on my site.

Dude! I remember these! You showed them to me a while back on Warseer I think! Very awesome that you are releasing them now!

zinge wrote:Thanks for the advice - i hope to be upgrading my pictures fairly soon.

I have quite a few like the one attached but I doubt I can use it effectively on my site.

NIce one! I think you can use it, I've seen other sites use GW figs but with a disclaimer something like - model not included and shown only for scale

But UK law might be different from US so it's always best to get a professional opinion.

YOu could also put up models from a less-aggressive or defunct company.

How about a silouete? (Cheque spegling) Bit rough but as an idea - need to find a professional - surely the internets are full of them?

zinge wrote:need to find a professional - surely the internets are full of them?

full of people who say they're professionals...
But thanks for the pic with the marine!

you mean heavy armored fighter?

very cool work zinge, the idea to cast the belts with cables inside is pure win!will consider buying your belts in the future...

what plans do you have besides the already releases?

wow these are awesome!

If you need someone to photoshop some pictures let me know

by the way, if i order a set of your amo belts, would i have the choice to choose what belt and get them five times or is it a set and you get five different belts een if you dont need for of them?

and do you do paypal?

I do Paypal.

I will add the function to choose which belt you get 5 of

Glad you got a store going.

I'm excited for the fans/vents.

Good luck man, the ammo belts I got a while ago are great.

How's about a size guide?
bolter ammo belt=__mm
autocannon belt=__mm
I am really thinking about buying a load of these for my raven guard and having them attached to thier lower backpack, much like heavy bolter devastators...
new product idea- pack of 5 belt-to-gun attachments, much like in that SM pic...
and aforementioned 28mm ammo backpack...

cool, thanks for adding such an option, this will making ordering something from you way better...

@ Shrike

Each product page has a description and sizes

http://www.freewebstore.org/Zinge-Industries/Set+of+5+Flexible+Resin+Small+Ammo+Belts/p658641_2863675.aspx

The belt to gun attachment is a piece of plasticard

I don't want to use words that might get me in trouble bolter, autocannon etc

with these thingies there is no need to buy the heavy bolter setup anymore... just scratchbuild them with some plasiccard... this could be fairly easy...the belts where always the main reason i didn´t do it...

Some Pics from my CMON account showing power cables and ammo belts

zinge wrote:@ Shrike

Each product page has a description and sizes

http://www.freewebstore.org/Zinge-Industries/Set+of+5+Flexible+Resin+Small+Ammo+Belts/p658641_2863675.aspx

The belt to gun attachment is a piece of plasticard

I don't want to use words that might get me in trouble bolter, autocannon etc

ah, which sizes are bolter and heavy bolter?
and is it possible for you to cast a similar version of that plasticard thing, maybe GSing it to be smoother? I'd buy it.

i guess this would be fairly easy to built... heck mabye you could find some piece at your household even...

I've bookmarked your store. I like those vents and I'll keep an eye on your stuff in future. Might even suggest it for addition to the tUGS link box if you continue releasing cool stuff.

I see some lash whips from those power cables for my nids. I'll have to put in an order here soon

@ Shrike,

I only added that bit because I cut off too much of the bolter. Removing just the clip makes for a decent looking conversion

see attached and the above pictures of bolt pistols

I shall do a quick tutorial

Tutorial:

Small ammo belts on Boltpistols and Bolters

SA5 Belt for Pistol
SA1 Belt fot Bolter

Remarkably simple... I feel an order coming on.

zinge wrote:Tutorial:

Small ammo belts on Boltpistols and Bolters

SA5 Belt for Pistol
SA1 Belt fot Bolter

This is FANTASTIC. OK, you sold me.

I'd like to second CURNOW's request for tanky bits. I want to make my Leman Russes look different and things like your vents are great for that. I'd love items like targetting modules for turrets and other mechanisms that would fit on 40k vehicles.

tho i think the belts look awesome i have to give a bit of critics here...

it kind of looks a biut akward to have the belt just comming from the shoulderpad... does he have the spare amo just sitting on his shoulder beneathe the pad? i think rather not...

Ask the Grey Knights and Pedro Kantor where they keep it?

But I do see your point but I think it looks cool.

ok point taken^^ googled Pedro Kantor and saw what you mean, but he has on the model i saw a backpack mag..^^

any other cool bits your planning to do next?

See First Post

Fans small, medium & large
Pistols
Grills
Modular tank track system

the modular tank track system is really intriguing...

Watch this space

zinge wrote:Ask the Grey Knights and Pedro Kantor where they keep it?

One of the greatest secrets of the Grey Knights is that they have an extra geneseed organ, which modifies the black carapace to allow... long story short, before each fight they all have to ingest 90 or so bolter rounds.

Ouze wrote:

zinge wrote:Ask the Grey Knights and Pedro Kantor where they keep it?

One of the greatest secrets of the Grey Knights is that they have an extra geneseed organ, which modifies the black carapace to allow... long story short, before each fight they all have to ingest 90 or so bolter rounds.

And Pedro Kantor is really Sly Marbo in power armor. Dorn's Arrow shoots bolter rounds because he says they do.


These look great - I wasn't able to see the pics on the first page but the subsequent pics have shown great promise. I won my Pedro Kantor in a tournament, but if I didn't the ammo belts would give me the excuse to convert my own. I just might pick some of these up for more Sternguard conversions. Great idea!

Simplified Postage and added the ability to select sets of belts

Seeing what you've done with the wire, I gotta say, great work!

Pistols

Just cast these - mold not quite right yet needs a little work maybe remaking (too many voids)

I have a bunch of miscasts of these - Anybody who is interested contact me and I will send you some samples - will need feedback (uk only please) will chuck a few in with the next few orders.

Those are miscasts to you, I know a company to who those are perfect casts.

cough*FW*cough

If the offer was up for people not in the UK I'd love some samples.

I can't wait for those and the modular track system.

Colour me impressed!
Those look great!
Could you do some belts of shotgun shells? (Both human scale and Ork scale, ideally)

shrike wrote:

zinge wrote:need to find a professional - surely the internets are full of them?

full of people who say they're professionals...
But thanks for the pic with the marine!

To be a professional _anything_ all one needs to do is be paid for it, I think the terms become more restricted to sport in that sense however, over the years.

I think I should have said "professionals"

those pistols i imediatly fallen inlove with... the mauser is superb! is there a chance to egt a whole sprue of only one model? this would be very very very nice!

now i could do my sergants and IG officers like Han Solo^^

Would people prefer sprues of 5 identical or packs as above.

Or should I do a "bits service" have to charge extra for the faff

the later sounds almost as good as it could get! that way the customer has the full choice possabilities...

what about the shotgunshels on a belt? that would be great!


Automatically Appended Next Post:
also if that would not be too much hassle to medel, what about weaponaccessoires? like light and other old fashioned bajonettes? or for that matter bipods? and scopes^^

I like those realy nice designs good mix of scifi and modern pistols.

Resin bullets and cartridges would be cool, not sure how hard it would be to make though. I would really like to be able to sprinkle cartridges on some of my bases.

Do you have any plans to make lengths of chain? I know allot of people could find uses for it. Like 10cm lengths of resin chain in different dimensions, heat it up in some water and you could wrap it around things and create other cool torture racks and stuff.

Really like the belts

Btw its magazines, not clips. My nerdy side tends to twitch every time someone does that

I stand corrected!

Thankyou for the kind words.

Don't forget - free miscast samples with every order whilst stock lasts. (Admittedly not the best offer in town).

Damn, I wish I'd ordered the cables after you offered miscasts

I ordered the power cables on Wednesday and I've just got home from work to find they have arrived. Nice colours just perfect. Excellent service .

I'll be ordering some more cables when you put those guns up. The guns look fantastic and a gun runner I'm planning for Inquisitor wants to be armed with the 5th one from the left.

Brilliant. BTW I'm looking for a double barrelled shotgun...any plans?

Thanks

Peter

Some Orky six-shootas would be very useful. There's a distinct lack of revolvers for Orks, although the occasional model has one.

Another update (made these awhile ago for necromunda conversions)

Had a few takers on the miscasts still some left for uk members (cheap postage), plus anybody who makes an order.

Cheers

Kit

Nice! I'd buy some of those combi-weapons, If I didn't have a method to make my own...but nice!

I really like your site. It will definitely help me get my orks off the ground.

samwellfrm wrote:I really like your site.

heh..."You got a purty site."

shrike wrote:

samwellfrm wrote:I really like your site.

heh..."You got a purty site."

I've just been mocked...

nah, you've just been part of some banter and jibes. feel good, you've been part of a joke.

Now Now children - play nice!

I feel better now. You actually kind of fed my ego by giving me attention.

now let's shake hands and be friends...

I'm liking those additions. How about some sights for weapons?
I'm thinking of the different kinds available for Necromunda in this case.

I particularly like the mauser C96...I'm gonna be buying loads of these when they get up on the site...
are you gonna do what you did with the ammo belts- choose 7 or so of any type, or is it one of each?

I think from the feed back I will do a deal on a set and a price per pistol.

Are you planning on making belts of shotgun shells?

How about if I beg?

Demo charges? please?!

wishlists are:
individual/sets of one type of pistol
ammo backpacks
connectors to fit belts to guns
shotgun cartridge belts
weapons sights
ork revolvers (and 28mm revolvers in general)
demo charges
orky shotguns

in this kind of order. (most popular requests to least popular)

shrike wrote:
orky shotguns

Orky shotguns exist. I sculpted them myself. You can get them here.

(How silly of me, they're for "mutants" )

Those bolter belts are pretty freakin' awsome.

I may need a couple for some conversion GREAT idea.

When will these be available on your site, and can you post dimensions or a scale shot?

zinge wrote:Dug some pics of my fans - mold not quite up to scratch on these.

Current set = 1 large, 6 medium & 6 small - £3 for the set.


Automatically Appended Next Post:
Yes better pics would be good and will be sorted at some point!

Ammo belts are awesome, and fill a niche.

I think you need to do matching caliber shell ejection streams for all your belts...

Cinematic muzzle bursts of mathing burst size would be cool too, but I know that another company already does those, but definitely the shell ejection streams would be cool.

Small SA5 belts work well as bandoliers too!

I love it. A flintlock with a bullet belt...

hmmm thats good trading that is... giving extra arguments to buy your products...now i have to count my peas to spring into action...

Really interested in the tank tracks myself.

Ooooo - I like this.

Vinyl Decals ? how are they better than the water ones gw has?

Vinyl Decals - got my first commission on these so pics should be forthcoming.

These decals work in a similar way to the FW brass etch.

Except they are self adhesive and will easily conform to contours.

The result is raised detail that can be easily painted and highlighted.

sounds really interesting...looking forward to see some pics to better understand how that could be used...

Sounds cool, and I just got my package of miscasts in the post.
A bit of flash, but that's to be expected. Apart from a few bits (a propeller and two pistols), as far as I can tell there's very little in the way of miscasts. The propeller is slightly wonky, so is the door (fixed with some counter-bending to make it straight), and a few gun barrels wonky, it seems all good. I especially like the mauser, and I'm waiting for a truly special guardsman to come along for it. I put the large propeller on top of my Ursus rhino (see my blog for linky), the small propeller on my open-topped chimera (pics will be posted) and the medium propeller on my stompa. The door went on my converted "centaur".
Will try the pistols out when I get my guardsmen.
really sweet!

sounds like your not only a good sculpter but a quick deliverer too...

Hi Guys,

New Pistol mould is good - need to get some stock, photos and update the site.

As for the vinyl decals see below for my Blood Angel Tanks and some commissioned shoulder pads

How detailed can you make the vinyl decals? I take it the more parts it has the more complicated it would be to add to a model. Isn't it just the same thing as cutting out a sticker and putting it on a model? or is it make from another material?

I have never used vinyl stickers and this does sound pretty cool.

Just ordered 1 of everything you have for sale that was in stock, will do a review on the stuff once I get it.

Hi Thanks for the order, I will chuck in some random miscasts for you to look at.

The vinyl decals are essentially stickers but unlike paper they conform to most 3D curves.

The Vinyly is thicker than paper and easy to paint.

Detail wise its trial and error if you have an idea send me the art work and I will let you know what I think.

Cheers

Kit

What colours can you use? Can it only be 1 colour or could you literally take a picture of the mona lisa and have it put on a vehicle?

Hi,

The vinyls are added before undercoating and painted as raised detail (sorry if that wasnt clear) Have put a couple of samples in your parcel.

Keet

I think I might order some decals. I just have to think of an insignia for my guard company...

Edit:

Can I suggest you make some space marine scale claymores? If you do, then I will be one of your biggest customers.

Looks like SA5 will do well to replace the oversized clips people don't like on the new Power Armoured Grey Knights

zinge wrote:Hi,

The vinyls are added before undercoating and painted as raised detail (sorry if that wasnt clear) Have put a couple of samples in your parcel.

Keet

awesome!

what file format/resolution do you prefer for them?

Zinge, easy marketing option for you:

Come up with an 'ammo box' that will connect to your SA5? square belt and post it in every place that even mentions Power Armour Grey Knights.

For decals I prefer vector drawings but I can design decals to order from a concept photo.

Contact me with an idea for a quote


Automatically Appended Next Post:
Ammo boxs for my belts - hmmm - might jump the queue

Ammo boxes for your different ammo types would be great, I reckon.

So how long do you think until you make those Grey Knight feeds?

zinge wrote:Would people prefer sprues of 5 identical or packs as above?

I suggest you need to offer both - some people will want a random mixture of all-different weapons (e.g. for a grot squad), but others will want bulk identical weapons (e.g. for marines).

I really like what you're doing here. The vinyl transfers sound quite intriguing, and ideal for chapter icons in various sizes. Obviously you can't copy GW icons for legal reasons, but there's nothing stopping you e.g. doing wolf heads that just happen to be the right size for a space wolf army.

stuff GK, I want any astartes to have them!

Hurry up and get those pistols up, I've got a Necromunda campaign starting soon....

Mick

I was wondering that to! I´m planing a thunderhawk gunship build and would love to get my hands on the large fan

grizgrin wrote:When will these be available on your site, and can you post dimensions or a scale shot?

zinge wrote:Dug some pics of my fans - mold not quite up to scratch on these.

Current set = 1 large, 6 medium & 6 small - £3 for the set.


Automatically Appended Next Post:
Yes better pics would be good and will be sorted at some point!

Wishlist:
Space Wolf decals ("Ragnar" wolf symbol, winged wold skulls, etc. large for vehicle doors/frontplates/backs smalle for detailing)
Combi-melta bits ala that combi flamer!
Autoguns

Nice work...Really wanting the SA1 and SA5 for my BA Death Company because who has time to reload when you're in a psychologically induced blood rage to eat your enemies faces like it's day old pizza.

jmurph wrote:Wishlist:
Autoguns

Hell yes. We need some good autoguns that don't look like real world rifles.

I want Autoguns,Ak-47 style.

I want revolvers for IG.

col. krazy kenny wrote:I want Autoguns,Ak-47 style.

MaxMini do some.

jmurph wrote:Wishlist:
Space Wolf decals ("Ragnar" wolf symbol, winged wold skulls, etc. large for vehicle doors/frontplates/backs smalle for detailing)
Combi-melta bits ala that combi flamer!
Autoguns

Obviously I can't copy GW IP coz that will hurt from here to eternity I can do wolves not space wolves

Heat gun attachement - could do

Scifi Machine Guns - Sounds Fun

I'd like to second the revolver request.

I need 3 more ideas for pistols so I can do a set of 10

Revolver (magnum, I take it - Dirty Harry all the way!)

How about a few alien style pistols ? For all those budding rogue traders / inquisitors out there ?

Hi Curnow - Not sure what you mean - Please elaborate?

glock .22?
how's about one of those snub-nosed anacondas?

zinge wrote:Obviously I can't copy GW IP coz that will hurt from here to eternity I can do wolves not space wolves

Heat gun attachement - could do

Scifi Machine Guns - Sounds Fun

Of course! I meant sci fi warrior wolf motifs and symbols!
And shielded microwave guns sounds awesome

For pistols, revolver's and clip fed automags tend to be the most common, but there are pretty distinctive styles like the 1911, Walther, and Luger. You could also go for a pseudo archaic pistol ala the pirate style.

Sci Fi *assault rifles*. MGs are bigger and usually have a loader and gunner! Generic arms (bare and sleeved), to hold them would be cool, too.

zinge wrote:I need 3 more ideas for pistols so I can do a set of 10

Revolver (magnum, I take it - Dirty Harry all the way!)

An M1911, a Beretta 92F, and a Glock 17 (extended magazine)?

harrison ford's pistol in Blade Runner, bulky and futuristic, perfect for necro or IG
m3a1 classic grease gun
ithaca x caliber iconic single shot heavy pistol

Flamekebab wrote:

zinge wrote:I need 3 more ideas for pistols so I can do a set of 10

Revolver (magnum, I take it - Dirty Harry all the way!)

An M1911, a Beretta 92F, and a Glock 17 (extended magazine)?

Pistol, pistol and pistol then

my sculpting might be good but I doubt I you tell the difference at 28mm scale

I was thinking a tau style pistol or a elegant laser pistol or some kind of Crystal based gun or organic weapon ? Ones people can use as wargear or as wysiwyg parts . I think the xenos book had nice examples in it ,

Alien pistols - might be in another set or could be an archeotech type jobby

This is cool




Automatically Appended Next Post:
Images of guns helps too please

Lol I used to have a resin dekards blaster ! Have a look in the dark heresy rule book and at the weta workshop designs for district 9

there was this nice easteregg laserpistol in the first fallout game...

zinge wrote:Alien pistols - might be in another set or could be an archeotech type jobby

This is cool


Images of guns helps too please

Much like the Shortstop in Team Fortress 2:

zinge wrote:

Flamekebab wrote:

zinge wrote:I need 3 more ideas for pistols so I can do a set of 10

Revolver (magnum, I take it - Dirty Harry all the way!)

An M1911, a Beretta 92F, and a Glock 17 (extended magazine)?

Pistol, pistol and pistol then

my sculpting might be good but I doubt I you tell the difference at 28mm scale

It might be difficult to tell the difference between the M1911 and the Beretta 92F, now that you mention it. How about a Desert Eagle instead of the Beretta?

M1911:


Beretta 92F:


Glock 17:



Desert Eagle:


A luger wouldn't be a bad choice either:

Viktor von Domm wrote:there was this nice easteregg laserpistol in the first fallout game...

Which was the special laser pistol in F1?

There was the rather awesome Solar Scorcher in F2.

the first one was the avaerage one... the second one i am not really sure...

also these are really cool looking handguns...

Viktor von Domm wrote:the first one was the avaerage one... the second one i am not really sure...

The second image you posted is a papercraft version of the Fallout 3 Alien Blaster:


Something similar did appear in Fallout 1 and Fallout 2 though:


This is the Solar Scorcher, which I think is quite cool but don't really want a model of:

yep i meant the alien blaster... the golden one^^

thanks


and tho i like them all i think for my 40k armies none will work...

I liked the tank/vehicle vents and fans, can't wait to see more of those. Also, try not to bite off more than you can chew. I have seen so many start ups run into trouble due to going to fast, then falling on their face. But set your own pace that you can handle and fly with it!

NEEDLE PISTOLS!!!!

They are a large part of 40k fiction.

Def a 1911.

i second the demand for good needle pistols and raise the demand for medical tools and equip...

Those vinyls sound (and look) good.

Have you thought about doing simple letters and numbers in different sizes? That is one of the most annoying things to paint, especially squad numbers on IG infantry etc.

jmurph wrote:the 1911, Walther, and Luger. You could also go for a pseudo archaic pistol ala the pirate style.

I want walther MPL, PP-19 and the luger.
so the requests are:
quad-barreled pistol

walther MPL

PP-19 bizon

luger

M1911 (I thought there was already one on the sprue?- oh, no, that was a holstered one.)

classic sci-fi laser gun

steampunk pirate/treasure planet style flintlock pistol

revolver

snub-nosed revolver


you, zinge, have a lot of work to do.
but then, you'll hve a lot of happy customers to buy more stuff.

and while searching for a 4-barreled pistol, I found this, which is just plain ridiculous.

lots of nice finds but i see only potential for a few of them 40k wise...

the last one i have seen before but still made me lol^^

mostly for IG...
but I can imagine flintlocks being used by rogue traders, inquisitors and officers...
and same with the revolvers...
MPL and PP-19 I really want for a few of my IG veterans...
luger is for sergeants and officers...
M1911 the others wanted...
and the laser gun is to tacky and stereotypical for my liking...

if i am not wrong then an automatic rifle^^ for vets should look like a FN FAL...



and the flintstock pistol could be probably easier get hold of from the fantsy line tho i would take my chances to get a better version from zinge too^^

Thanks for all the photos - some food for thought - a veritable feast.

So looking like the next 4 to make the set will be -

1. Pistol - Desert eagle/Glock/etc

2. Revolver - Magnumesque

3. Laser Pistol - Generic Sci-fi

4. Flintlock/archeotech - Firefly/rogue trader/steam punk

5. Snub nosed revolver

6. Luger

7. Walther mpl

8. Dart Pistol - toxic sniper weapon

9. Quad barrel pistol

10. Blade runner pistol

11. M3a1 grease gun

Anymore for anymore? and then I will do a poll

There is probably another set if these are popular

I think that if everyone lists off 5 guns in that list they prefer, then make the most popular sooner.
no. 1 gets 5 points, 2 get 4pts, 3 gets 3pts, ect., then tally them up. That's how I'd do it, anyway.

a polls much easier and I will end up doing a cross between popular and fun to design/make

Please feel free to make a list

okey dokey.

-revolver. good for most GEQ armies and fun.
-Luger. See above.
-Desert eagle/Glock/M1911. See above.
-Flintlock. good to add character to a model, perfect for inquisitors and traders.
-dart pistol. With C:GK coming round the corner, needle pistols and such will be needed.
-Snub nosed revolver. good for most GEQ armies and fun.
-walther MPL. Good for GEQ veterans and to add character to a solo model/diorama.
-Quad barrel pistol. adds character to a model and fun.
-M3a1 grease gun. See MPL.
-Laser Pistol. I find that they're just more stereotypical laspistols.
-Blade runner pistol. Only for one race (IIRC), so limited use.

I wouldn't lump the Desert Eagle and the other pistols together. The size and shape difference is significant.

I would like to see P90s but then again that's just my fetish speaking


If anything I would like to see female stuff, female heads, torsos that kind of thing since pretty much no one makes those.

a gatling pistol, like the Hellboy one?

MadCowCrazy wrote:that's just my fetish speaking
...
If anything I would like to see female stuff.

so your fetish is guns, NOT female stuff?
I am intrigued by the hellboy idea- pics please.

Sounds like a fun weapon

So a mini-minigun barrel on a pistol?
I like it, just not on a revolver. It'd fire 6 shots in 1/2 a second, then you'd have to reload.

Oh yeah, a gatling pistol is remarkably silly - well, unless you need to get past 6 zombies in a hurry Looks cool, though...

I thought it was a shotgun

okay then, it fires 6 shots in 0.01 seconds and then you'll have to reaload.

shrike wrote:okay then, it fires 6 shots in 0.01 seconds and then you'll have to reaload.

Plenty of time to do that, you've just wasted everybody in the room.

true...
that's like a spas-12 blowing out all it's ammo in one go...ouch...
I want this in the next COD...
hey! How's about an MP40?

does the IGs need more german armory still? i think tho quite sylish looking the MP40 is a weapon associated with lots of carnage...remeber it was not a standard issue gun but more of the rotten stormtrooper used armory...kind of smells a bit of the nazis for me...

yep.
How about the old brown bess?

The pistol hellboy uses "big baby" is a shotgun, he uses the wingnut on the back to wind it up, uses it to kill really big things. To be fair his normal pistol is pretty good too

The Samaritan does kick arse.

this could tempt me too....to no end^^

Sten gun?

The second image is a Sterling Submachine Gun, SilverMK2. They're pretty awesome too and remind me of No One Lives Forever.

If you could make just a few of these I am sure they would go fairly quickly, not only would they look very cool scattered throughout an army of troops, they would really add some personality to them.

Ammo belts are incredible btw! they would make excellent additions to my BA vets.

Flamekebab wrote:The second image is a Sterling Submachine Gun, SilverMK2. They're pretty awesome too and remind me of No One Lives Forever.

I did wonder why it looked so different

Edit: Also you might think about doing some different flamer fuel tanks?

the sterling pratchett is a thing i see a great future for stand in autoguns and also some huge potential as ork shootas...

it definitely has a certain flare to it.

I like the idea of using them as autoguns or lasgun replacements for Imperial Guard.

If you want Orky British weapons you can get them here.

yup knew of these beauties^^ but a little competition never hurt^^

I was kinda mentioning it to avoid unnecessary competition. I love how there's so many different companies emerging these days that offer parts that happen to be the right scale for GW games. It's fantastic for fans of their skirmish games!

yep right on all acounts...tho i think even if they all did the same things/weapons i am hoping there is enough diversitiy and differences between tow similar bits...

Flamekebab wrote:I like the idea of using them as autoguns or lasgun replacements for Imperial Guard.

The Sterling as replacement lasguns makes me giggle like a school girl SOOOO hard!

Why?

Because it becomes one of these with some simple modifications:

Precisely

cool, you have certainly done your converting homework^^

Ok so a minor up date on other bits:

Fans - Greens redone - Making mold tonite - Set is now 1 Large 30mm, 1 Medium 20mm, 2 Small 15mm and 3 Tiny 10mm. Hoping for a price of about £3-£4 a set of 7

Grills - Greens done - Mold tonite - Set is now 1 large round, 2 small round, 1 large rectangle, 2 small rectangle. Price £2-£3 for a set of 6

Pictures later

If you're talking about aircraft-intake type fans, I think sets of the same size would be more useful than mixed. If I'm making an airplane-style model, I'll want two (or more) of the same for symmetrical engines, and not have much use for the others.

- H8

I am coming to the conclusion that anything I do must be available separately or in small sets of identical items.

To this end all items will be available in sets (i.e 4 large fans for £X, 5 pistols for £Y) - These sets will workout slightly more expensive than buying the original set due to faffage.

zinge wrote:I am coming to the conclusion that anything I do must be available separately or in small sets of identical items.

To this end all items will be available in sets (i.e 4 large fans for £X, 5 pistols for £Y) - These sets will workout slightly more expensive than buying the original set due to faffage.

Thats pretty true, but people are picky, most people that do bits do things like "8 shoulders, and 2 specials houlders" in a set, rather than a bunch of misc ones
however selling focused items will let you be more focused on what your customers want (since those items will sell more), which will help you make more/better selling products in the future.
I'll try and get that vector drawing to you this week! things are just super busy for me right now

good decision... but whats faffage? couldn´t look it up...

Viktor von Domm wrote:good decision... but whats faffage? couldn´t look it up...

Faff - To mess about. Make something harder than it has to be, etc...

Grundz wrote:things are just super busy for me right now

Aint that the truth

zinge wrote:

Grundz wrote:things are just super busy for me right now

Aint that the truth

puppy is coming home on friday! ^^

I hope thats not a youformeism or an inyourendoh

I received the things I ordered today, seems good

Here is an Idea, I'd like to see Riot Shields, the square type that Adeptus Arbites tote around. I'm in need of a few of those for my Henchmen conversion projects.

or if someone already makes those please give me a link

Foundry do some and so did void?


Automatically Appended Next Post:
http://www.scotiagrendel.com/Products/index.php?main_page=product_info&cPath=59_64&products_id=418

zinge wrote:I hope thats not a youformeism or an inyourendoh

Consider it stolen...
I find you'll sell more if you sell sets of 4/5 of one weapon.

thats a bit going far to say that here... one might say you ask for some lawsuits at your doorstep...

that's a bit going far to say what here?

well my padawan i was only stating that you might not hear the creaking of the thin ice...

what thin ice?

ccccrrrrrrAAAAAAACCCCKKKKK!!!!! splashh++++blubbbb................ silence

um anyone have an idea what hes talking about ?

how about some hvy weapons on wheels ? ie not-hvy bolters and not-lascannon ?

CURNOW wrote:um anyone have an idea what hes talking about ?

I do. Never mind.
I second wheeled heavy weapons, but don't GW do those metal ones with wheels?

CURNOW wrote:um anyone have an idea what he's talking about?

How about some heavy weapons on wheels?
i.e. not heavy bolters and not lascannons?

MaxMini do a gatling platform, if that's any good?

CURNOW wrote:um anyone have an idea what hes talking about ?

even i don´t know what i am talking about... must be low bloodsugar...

Please dont recast my stuff - or anybody else's stuff for that matter

He has the bloody knife as a logo for a reason..

BrookM wrote:He has the bloody knife as a logo for a reason..

sorry zinge I was only going to recast the barrel of the mauser to stick onto bolt pistols, but sine you're doing sets of the same weapon I won't have to.

zinge wrote:I am coming to the conclusion that anything I do must be available separately or in small sets of identical items.

I think that is true of most things, but it depends on the item and its use. Like I said, if I'm making a 2-engine aircraft, I want two of the same turbofan. If you were making a bunch of scenic pieces to detail bases, I wouldn't - I'd want a varied set.

For pistols, it could be both. If I was making a gang/warband, I might want a mix of odd stuff to put a unique piece on each one. If I'm making an army regiment, chances are I want them all to have the same sidearm.

To this end all items will be available in sets (i.e 4 large fans for £X, 5 pistols for £Y) - These sets will workout slightly more expensive than buying the original set due to faffage.

Well, say I need two of your 30mm fans. Even if I pay £2 each, it's still cheaper than ordering two £5 packs, if I'm never going to use the other parts.

- H8

Awwww crap, he actually had the size of those fans posted some place and I missed it? gak. Where?

Add 90g of A slowly sifit in part b mix Knead thoughoughly poor into a greaseproof mould and bake at 60psi for 1hr

Wish me luck - pics later or not depending on outcome

@grizgrin - try warseer trading forum (it was moved)

zinge wrote:Add 90g of A slowly sifit in part b mix Knead thoughoughly poor into a greaseproof mould and bake at 60psi for 1hr

what are you on about? I think he's finally lost it...got stuck in a cupboard with only a cookbook for company...they found him 3 days later spouting gibberish about different recipes...tragic...

Lost it? acording to some I never had it and 1 in paticular was sure I had too much!

better this way then being average or even normal... that way lies the road to boredom and a life of the living death^^

Halleluja and pass the ammunition!

there's no such thing as normal...just something a teacher drilled into me once...
there's always something which marks you out as different to the norm.

people ask me- "why are you so different?"
I say- "If everyone was the same, how boring would it be?"
they then shut up and spend the next few days pondering it.

There has to be 1 normal person

Add everyone together, divide by everybody, take away the number you first thought of then you have an average or median person?

Maffs is dead useful

zinge wrote:Halleluja and pass the ammunition!

one of my favorite lines in all time... cant get any better than howling comandos^^

zinge wrote:Add everyone together, divide by everybody, take away the number you first thought of then you have an average or median person?

well i guess i have to give that to a true mathematican...

zinge wrote:There has to be 1 normal person

Add everyone together, divide by everybody, take away the number you first thought of then you have an average or median person?

Maffs is dead useful

and the answer is...42!
books is dead useful

BOOKS! thats like reading and stuff awesome!

my old teach said... the trend in society is leading to a two book household... yellowpages and a cooking book?

zinge wrote:BOOKS! thats like reading and stuff awesome!

sadly, 90% of kids & teens can't recognise one from further than 3 feet away.

2 books? Penthouse and the Koran!


Automatically Appended Next Post:
Ok and the results are in:

New pistol mould is all good - will start making stock

Fans - Not bad - would have been better If I had remembered to cut all the vents - Doh - starting to make stock

Grills - Perfect - Start making stock

Sorry MODs back on topic now.

For more Twaddle tune in next week

will you make a note here when you update your shopsite?


by the way... for a good fairytale i would opt rather for LOtR than the koran... but i guess penthuse is still ok^^

Yup - will also do a twitter and facebook update social networking ftw

Need to sort out some kind of newsletter

Pics as promised

Looking to release these and the pistols in a week or 2

I like those fans and grills lots!

Viktor von Domm wrote:my old teach said... the trend in society is leading to a two book household... yellowpages and a cooking book?

This is wrong, with the advent of the internet you don't need any books. However you still need to be able to read

lol...or watch youtube and they tell you what would be to read here and there...

Anybody fancy painting bits and taking photos for my website? I'm ok but very Slow. Would need to see some examples.

If anybody interested please pm me, pref UK for speed and cost of PandP

*sinks head*...

Viktor von Domm wrote:my old teach said... the trend in society is leading to a two book household... yellowpages and a cooking book?

People still use phone books?

Nope, but they keep getting given out every year!

Flamekebab wrote:Nope, but they keep getting given out every year!

Twice a year, if Colorado is anything to go by.

and don´t forget those championships where htey tear those phonebooks apart...

Viktor von Domm wrote:and don´t forget those championships where htey tear those phonebooks apart...

I'd love to compete in one of those...and tear it along the spine...easy!

I ordered some pipes last week, and you kindly add some other test bits too, I love the fan and vent thanks. The pipes are for my dreadnought when I finish them or at least get them on I'll post some pics

Great to hear it - looking forward to pics and your expiriences with my bits!

shrike wrote:

Viktor von Domm wrote:and don´t forget those championships where htey tear those phonebooks apart...

I'd love to compete in one of those...and tear it along the spine...easy!

Actually, it's easier than it looks. There's a technique that you can do that allows most people to tear it down the middle. The technique essentially makes it so that you're tearing each page in turn and not all of them at once.

Thanks for all the offers from painters - Some great offers.

I have teamed up with the awesome Pete Austin of Egghead Miniatures

http://www.facebook.com/pages/Egg-Head-Miniatures/120841174605022

Better pictures form my site woot!

so..when are you gonna arm the armoury?
If not soon, please put up some sneak peek pics.

I am filling the armoury as I type - When its stocked I will update the site and this thread

I've got a question about your ammo belts. How do the bullets compare in size to Ork ammo belts?
The ones I'm thinking of are for the Big Shootas.

I have one as well. Power cables! are the sturdy enough for say, servo harnesses on a tech marine?

Fans and grills = pure win.

I will be ordering some of those.

zinge wrote:I am filling the armoury as I type - When its stocked I will update the site and this thread

yay!
All hail Oh mighty Zinge!

Just waiting on the guns to make an order!

Looks like its gonna be a long weekend!


Automatically Appended Next Post:
@Flamekebab

Here is a flash git with the small shells from the large set

@IronfrontAlex - maybe depends what you want to do - I maybe able to do a special if neccessary - check your pm s

Website Update!

Now available - Pistols. Fans & Grills/Vents

Cheers

Kit

http://i28.photobucket.com/albums/c207/zinge/Pistols1.jpg

If I created a bit of some sort, door, square shields etc would you consider casting them? Resin is too expensive to get where I live so it's not really an option to me.

Either royalty free if you just make them for me or a small royalty if you deemed the part good enough that you would consider selling it to others?

zinge wrote:@Flamekebab

Here is a flash git with the small shells from the large set

Those look perfect. Nice.

Please tell me that the small fan/grill is just the right size to cover up those horrible lasgun holes in a chimera!

@Lord Solaar

Chimera holes are 10mm Dia, Small fans are 10mm Dia, Small grills are 12mm.

Pic for clarification - happened to have a chimera bit lying around

Awesome I just ordered a half dozen to try out, no more ugly lasguns hanging out for me lol

Thanks for the order!

Was sent this by a happy customer

http://dwartist.blogspot.com/2011/03/skorpion-finished.html

When my b-day comes this saturday, I'll be buying 5 mausers and a load of ammo belts. Are 0.7mm bolter round size, or is it 1mm?

Zinge - you really have some great stuff here and am very tempted by all of it.

One query though, would it be difficult/possible to make a larger calibre ammo belt for autocannons? I would like some for use on sentinals and IG Heavy weapons teams.

@notprop what size belt would you like - I can certainly look into it.

Cheers

Kit

Hi Zinge, did you recieve my PM regarding custom vinyl decals for my marines? I can't check your site since i'm at work but I can ask you here :-) would love to get some stuff, looks excellent!

@nerdfest09 & Everone else - if I don't respond to an email in a couple of days please resend or contact me here on dakka dakka.

Please shoot me a pm with details

Cheers

Kit

zinge wrote:@notprop what size belt would you like - I can certainly look into it.

Cheers

Kit

Sorry I'm at work at the moment so can't give you any measurements. Basically the same size as would fit into the ammo hooper from the autocannon on either the sentinal kit or the heavy weapons team.

I'll chech this latter and let you know.

Thanks for the quick response btw.

@notprop,

I found an Autocannon in my bits box - see below (thats with the small bullets from the large set. (AB01)

Hey Zinge

The fans/vents look good. I'll be ordering some shortly (read next month), along with some pistols and wire. A quick question about the pistols actually....

You sent be 7 miscasts of pistol and you only have 6 up...which of the heavy pistols did you retire? The large or small one?

Peter

Hi PDH,

The smaller one - I can still do it if people want it but its tricky.

It was a test to see if people want something a little more true scale.

Cheers

Keet

looks very fitting!

sods law!

Before I put my order in next month I'll PM you about it. I wouldn't mind a couple if that's feasible?...it would fit better on an Escher ganger with her lady hands (and any cadians).

Peter

zinge wrote:@notprop,

I found an Autocannon in my bits box - see below (thats with the small bullets from the large set. (AB01)

Nice one Zinge.

Those look a little smaller than I was looking for, would it be taking the piss to ask for a picture of your larger bolter shells next to the same sprue, could be the right size?

Dont say I never do nowt!

That looks a better fit. Order forthcoming in the near future.

Cheers.

I have posted my review of the sets I received.
http://www.dakkadakka.com/wiki/en/After_Market_Resin_Reviews#5_Flexible_Resin_Small_Ammo_Belts

i am looking forward to much more new ideas and designs here and hopefully there is much nice things to come...


at foda-bett

i think i will built up my own opinion in the coming month and if at all i am not satisfied i would find words in of more calmer nature...

Viktor von Domm wrote:
at foda-bett

i think i will built up my own opinion in the coming month and if at all i am not satisfied i would find words in of more calmer nature...

Would you mind telling me where I was not calm in the review? I gave a review I gave my opinions and where I thought the items would be useful.

@Foda_Bett

Company is a bit much - it's just me.

Thanks for the review and some of the kind words , i will take the rest on board and see what I can do.

@Viktor von Domm

Down boy! but thanks for the vote of confidence.

Cheers

Kit

I think you've got a good product so I was happy to do the review. I have a bunch of friends who do military modeling and when I told them I'd found bullet belts they came unglued. Most of the scale modeling community is unhappy with the way 1/35 ammo looks as a piece of photo etch and my friends were hoping the ammo belts would alleviate this problem.

I personally would love to see both sharper bullet details and a smaller version of the "Y" Segment belt. I know I would order a TON of both for my scale models as well as fixing those new plastic grey knights.

Got some new greens finished (not that these are green but white - you know what I mean) WOOT.

We have A new Bulk head door Beefier and a bit bigger

25mm Internal Round Hatch

3 sizes of tesla coil

Tesla coils are a great idea! A lot of VSF fans out there...

Mick

Yeah and a real pain to make

Thats why we wait for someone like youself to do it...

Mick

oh...tesla equip...now as if i wasn´t already hooked i am impressed as well... but to be honest that pic isn´t realy good, hope you show a better one soon!

vik

Thats not my pic just an example of a tesla coil

Viktor von Domm wrote:but to be honest that pic isn´t realy good, hope you show a better one soon!

Seriously?

Tesla coils would be fabulous for making Ork kustom force fields.

First pull from the new mold,

Couple of minor issues to sort and the hopefully releasing next weekend!

Love 'em.

yup they look cool...very likeable^^

There's a very fine line between classic but likable sci-fi and cheese, and I am glad to say this one doesn't cross it. Good work.

Oh boy. You just filled my orks with glee.

Looking really good. I especially like the possibility of using the fans for scratchbuilt counts-as Vendettas and Stormravens.

Could you make flexible tentacles, using the same technology as the ammo belts and cables?

Different-sized tentacles, with each size being available with one of three tips:

1) Tapered cephalopod tentacle.

2) Barbed-tipped tentacle that would be suitable for various tyranid creatures, demons, and maybe even some Dark Eldar.

3) Tentacle tipped with a bizarre and unknown alien organ of some kind.

I would buy several of all those I expect.

Ian Sturrock wrote:Looking really good. I especially like the possibility of using the fans for scratchbuilt counts-as Vendettas and Stormravens.

Could you make flexible tentacles, using the same technology as the ammo belts and cables?

Different-sized tentacles, with each size being available with one of three tips:

1) Tapered cephalopod tentacle.

2) Barbed-tipped tentacle that would be suitable for various tyranid creatures, demons, and maybe even some Dark Eldar.

3) Tentacle tipped with a bizarre and unknown alien organ of some kind.

I would buy several of all those I expect.

that's a good idea.

zinge wrote:

jmurph wrote:Wishlist:
Space Wolf decals ("Ragnar" wolf symbol, winged wold skulls, etc. large for vehicle doors/frontplates/backs smalle for detailing)
Combi-melta bits ala that combi flamer!
Autoguns

Obviously I can't copy GW IP coz that will hurt from here to eternity I can do wolves not space wolves

Heat gun attachement - could do

Scifi Machine Guns - Sounds Fun

+1 for a heat gun! I would buy ten or even better a "Death Ray" gun, maybe use a Tesla coils if they are small enough as the barrel...
Just needs to be something unique to stand out. http://en.wikipedia.org/wiki/Fileyrotronicdisintegrator.gif

Do you have any better pictures of the current pistols?

heh...look at that URL...
"www.blah wikipedia blah blahblah blah."

shrike wrote:heh...look at that URL...
"www.blah wikipedia blah blahblah blah."

Yes I thought it was quite funny when I saw it display like that too!

Hi Guys,

Back from an unexpected trip to Holland (Don't ask where or I will have to kill you )

Some interesting suggestions - tentacles, death ray etc.

There will be a classic scfi pistol at some point im sure thanks for the pictures.

@ Lord Solaar - Now I must go and practise my counting

Thought that people may want to see this:



http://s448.photobucket.com/albums/qq203/captainchaos88/grey%20knights/

Thats using the SA2 ammo belt to replace the awful sickle mags

EDIT: Just noticed quite a bad mold line on the sword hilt

@Zinge Thanks for the excellent service and quick postage

Very nice if I do say so myself

Let see some paint!

I second the paint! bring it on, the ammo belt looks great, good work Zinge, can't wait to see what else you come up with now!

cc88 wrote:Thought that people may want to see this:



http://s448.photobucket.com/albums/qq203/captainchaos88/grey%20knights/

Thats using the SA2 ammo belt to replace the awful sickle mags

EDIT: Just noticed quite a bad mold line on the sword hilt

@Zinge Thanks for the excellent service and quick postage

Very interesting, i had been considering purchasing from zinge for this exact purpose.

Couple questions: is that the entire length of one strip? IE, you buy 5xSA2, is that 1 entire SA2, or would 1 fit multiple guys?

Also, a stupid question: Im not understanding how we have flexible resin. Is it just a new product? I get that theres a wire inside, but in my head I see the wire being able to bend, and the resin around it just snapping. Do you have to heat to repose, or is this simply a flexible resin Im not familiar with?

@targetawg

That looks like most of a single belt which are approximately 50mm long.

The resin is flexible and has a shore hardness of around 60D (for those in the know) for aveage joes like me and you its a bit like Haribo (doesn't taste as good though) or cured green stuff.