Switch Theme:

Truescale Terminator Tutorial  [RSS] Share on facebook Share on Twitter Submit to Reddit
»
Author Message
Advert


Forum adverts like this one are shown to any user who is not logged in. Join us by filling out a tiny 3 field form and you will get your own, free, dakka user account which gives a good range of benefits to you:
  • No adverts like this in the forums anymore.
  • Times and dates in your local timezone.
  • Full tracking of what you have read so you can skip to your first unread post, easily see what has changed since you last logged in, and easily see what is new at a glance.
  • Email notifications for threads you want to watch closely.
  • Being a part of the oldest wargaming community on the net.
If you are already a member then feel free to login now.




Made in gb
Adolescent Youth with Potential




UK

I've been Truescaling (or Artscaling as I like to call it) for a few years now and I've been asked many times how I go about making my own conversions. I have a website devoted to these conversions at masteroftheforge.com where I already have a tutorial for Truescale Power Armour. This is my new tutorial on how to convert Terminators into Truescale.

Components You Will Need
These components are everything you will need for a basic Imperial Terminator Space Marine. Artscale Chaos Terminators follow the same approach but will require extra attention in the end stages to add all that ornate detail to top of the plain model.
Unlike the Artscale Space Marine in Power Armour the required components here are much simpler. All that is needed is a complete plastic Terminator and 40mm base. The arms aren't altered in anyway at all so something worth noting is that because of the amount of effort required in this conversion it may be a good idea to magnetize the arms to the torso in the end stage to give you multiple weapon options. If so you'll either need to make extra sets of shoulder pads or magnetize those too.
You will also need some 1-2mm thick plasticard and optional accessories like Purity Seals. Accessories can be a good way of hiding the mistakes and less than perfect sculpting, just be careful not to over use them.


Tools Required
You will need the following materials and tools.
Greenstuff and Magic Sculp or another epoxy putty of your preference (details on Putty below).
Superglue
Scalpel (X-Acto knife or similar surgical style scaplel) – the GW knife, is one of the best I’ve used. The scalpel blade is great for sculpting as well as cutting and it's handle is comfortable and a nice weight in the hand.
Replacement Scalpel Blades – cheap enough to get hold of, I bought a few hundred for next to nothing on ebay. Maintaining a sharp clean blade is essential, I usually swap my blades every few days.
Needle Files – optional but certainly useful. Come in flat, rounded and circular styles.
Pin Vice, drill bits and paperclips for pinning. This is optional in this build.
Clippers - optional.
Clay Shapers -soft rubber tipped tools in various shapes and sizes. These are not optional unless you are very proficient with modelling tools and putty, in which case why are you reading this?

Greenstuff
This is my personal preference for Green Stuff and what works best for me (I highly recommend this), if you favour another medium go with that.


Although I have used plain Green Stuff for a number of years I've recently found a preference for a 50/50 mix of Green Stuff and Magic Sculp (Note: Magic Sculp is very similar to Mulliput, which will work as an alternative). In this example I've used the flesh coloured Magic Sculp. I find it best to first mix the Green Stuff and Magic Sculp separately before combining the two together.


When fully mixed it will be a pleasing pale green colour.

When mixing your putty, make sure you have a clean work surface and clean hands, as any dust, plastic shavings, stray hairs, etc, will affect the quality of the putty. Ideally gloves would be recommended, but I personally never use them, and haven’t had any problems myself (I always wash hands thoroughly after mixing).

Before mixing the yellow and blue components of Green Stuff make sure to cut away the putty in the middle of the strip where the yellow and blue meet, otherwise you will get lumps in your mix. I myself used lumpy Greenstuff for years until someone told me I needed to remove the putty that had already slightly cured due to contact. It seems obvious now, but not at the time.

The advantage of adding Magic Sculp to Green Stuff is that it softens it but still lets it retain it own elastic qualities. The Magic Sculp also means that after curing if can be effectively filed, carved and scraped, whereas plain Green Stuff is less obliging to these techniques.

Note: from this point on I am actually talking about a Green Stuff & Magic Sculp mix whenever I refer to Green Stuff.

Sculpting
My approach to applying Green Stuff is quite a simple one. In most cases the sculpting is all about creating simple clean shapes. By doing the sculpting in multiple stages you can build up more complex designs by adding simple shapes onto one another one at a time.

After each stage of sculpting allow the Green Stuff to fully cure before moving on, otherwise you risk damaging your hard work.

My preferred technique is to apply more Green Stuff than I will need to an area, and then to begin shaping it starting with the larger clayshaper. The excess Green Stuff is then trimmed from the edges of the shape with a sharp scalpel.

Make sure to keep the tip of the clay shaper wet at all times, to reduce fiction on the Green Stuff and achieve a smooth finish. I find wetting it with saliva works best, but you MUST be careful that the tool is clean, you really don't want any putty getting in your mouth as it is a toxic material. Water or vaseline are effective alternatives, just be careful not to overdo it.

Use the clayshapers in the same way you would a paintbrush, using the flat edge to achieve smooth clean finishes. Concentrate on getting the shape (thickness) of the putty right, moving the excess putty to the edges of the shape where you can trim it neatly. Once the basic shape is about right you can focus on trimming away excess putty and getting clean sharp edges with smaller clayshapers.


Starting Point

The plastic Terminator legs will effectively become an armature onto which a new pair of legs will be sculpted.
Using your scalpel, carefully remove the hip-plates from the legs. Try not to damage the hip-plates as you will be using them later. If you have to cut into the actual legs this is ok as any damage will be covered over later.
Next remove the feet completely. You will not need to keep them, they can be clipped off and discarded.

Using the scalpel carefully cut clean through the lower legs, and cut two small pieces of plasticard that will act as spacers to lengthen the legs.

Glue the legs back together with the spacers in place.

You can roughly fill the gaps with Green Stuff if you choose, or make the plasticard spacers wider than the leg and carve it back to the leg width, whatever works best for you.

Begin by filling in the back of the lower legs. Add a large ball of Green Stuff in the centre and using a large clayshaper spread it left to right around the curve of the plastic leg. A lubricated clayshaper is essential to getting a smooth finish.

Note how there is excess Green Stuff on the top bottom and sides of the shape we are making.

Now using a lubricated scalpel blade (otherwise the blade will drag against the putty), trim off the edges of the back of the leg, and clean up with a clayshaper.




Repeat on the other side. Usually best to allow one side to cure first otherwise you risk accidentally damaging the soft putty.

The thighs use the same approach but are more difficult because you have to work all the way around the leg. Start with a sausage of Green Stuff (it always starts with a ball or sausage of Green Stuff ) and wrap it around the thigh.

Smooth out with a clayshaper and trim excess from top and bottom of the thigh. Don't worry too much about getting the edges perfect as you'll be sculpting over them later anyway.

The front of the lower leg is one solid armour plate and is the chunkiest part of the leg. Follow exactly the same approach as with the back of the lower leg, only you need to create a "lip" between the front and back.

If the plastic legs have knee pads you can decide now whether to sculpt over them (making a one piece greave) or leave them uncovered and add the knee pads later. Optionally, you can add knee pads later even if the plastic legs don't have them.




The front of the groin needs to be covered with a thin layer of Green Stuff to pad it out. When that has cured add a thin sausage of Green Stuff around the waist to make the belt.

Flatten and trim.

The "bands" that reinforce the thighs are calves are one of the most tedious parts of the conversion. For each one roll out a thin sausage and press it on the model roughly where you want it.

Trim the ends off then smooth over  using a small clayshaper. The are 14 individual parts to these horizontal and vertical bands so it will take a little while to do.

Boots
The boots need to be entirely scratch built from Green Stuff. Find a piece of plasticard to sculpt onto and measure out two rectangles, each 8mm wide by 12mm deep. These are the confines into which to sculpt the feet. Begin by making two smooth featureless foot shapes, leaving 1mm around the outside edge. This will form the core of the boot.



Smooth a lump of Green Stuff over the back end of the foot, trimming away with a scalpel and smoothing it off with a clayshaper.


Once this has cured roll out a sausage to for the trim on the front of the boot.

Trim and clean up.

If you plan on making more than one Artscale Terminator now is a great time to mold the boots you've just made. I use Blu-Stuff but whatever works for you will be fine. The boots are a very simple shape so very straightforward to cast.

Once you have your legs and cast boots you first need to figure out where to place the boots on the base. When you know where to locate them glue them to the base.

Next add a ball of Green Stuff on top of each boot and press the legs on top of the boots. The Green Stuff allows you to attach the legs and position them how you want without glue or pins. Leave to cure.

Once this join is cured trim and neaten up with fresh Green Stuff.

Torso
The torso is bulked out on the sides and chest plate.

Start by putting together the two parts of the plastic torso and removing iconography.

Next mix some Green Stuff, and spread it across the side of the torso. As before, the excess Green Stuff is pushed to the edges...

…where it can be easily trimmed with a scalpel, following the existing shape of the torso...

… and then cleaned up with a lubricated clayshaper. The thickness should be just enough so that the plastic where the arm normally joins the body is near the surface.

Repeat on the other side and allow to cure before moving onto the chest plate. One large blob of Green Stuff spread across the chest, smoothed out with a large clayshaper.

Trim the excess from the edges and clean up.

If you wish you can cut away an arch in the bottom of the plate with a scalpel.

Shoulder Pads
The shoulder pads are pretty straightforward except for the need to hold them.

Start by cutting away the crux terminatus on the right shoulder pad. If doesn't have to be perfect, just get rid of the mass.

So that you can hold on to the pad while applying Green Stuff glue a plasticard rod or tube (or something similar) to the inside of the pad. Once the pads have been sculpted over these improvised handles can be broken off.


Add a ball of Green Stuff onto the pad and spread it all the way over with a clayshaper. As usual the edges don't matter.

When you have a smooth finish you can trim away the edges, following the outline of the edge of the plastic pad.

Finishing Touches
 Use the same approach that you used to attach the legs to the boots to attach the torso to the legs. This ball of Green Stuff won't be visible, but is just used to add space between the torso and legs.



The final touches involve re-attaching the hip-plates, adding knee pads (if applicable), adding the tubing behind the knees, all very straightforward. After that it's just a matter of gluing on the head and choice of arms.
Details like a chest aquilla and the crux terminatus can either be molded and cast from existing models or sculpted.
At this point you can if you wish add pins in through the underside of the base and into the lower legs to be extra sure the model is secure.










masteroftheforge.com 
   
Made in gb
Avatar of the Bloody-Handed God






Inside your mind, corrupting the pathways

An excellent tutorial with fantastic results.

I think you should add this to Dakka's article system - if you need a hand (or wouldn't mind if I added it on your behalf) let me know (assuming you are happy for it to be added)

   
Made in gb
Changing Our Legion's Name





Nicely done, Will be trying this out some point with some ideas I've been having. I'm glad that you've made realistic looking true scale... I've seen some of the monsters out there that reach as tall as a dreadnaught in hight alone.
   
Made in us
Veteran Inquisitorial Tyranid Xenokiller






The Peripheral

I won't be trying this, it's obviously done by hands that are much more skilled than mine. Very good job.

 
   
Made in gb
Lord of the Fleet






London

Excellent, just wish my putty skills were good enough for this.
   
Made in gb
Avatar of the Bloody-Handed God






Inside your mind, corrupting the pathways

I liked this so much I have just started converting some of my leftover terminator torsos to "true scale" versions and have made some internal supports to start sculpting some TS terminator legs (as my terminator legs have all been used to make TS marines ).

Looking forward to seeing what I can come up with

   
Made in ae
Frenzied Berserker Terminator






Very cool, but too much work for me!
   
Made in au
Fixture of Dakka





Melbourne

This is amazing. Is that thing with the white head a clay shaper?

My Blogs -
Hobby Blog
Terrain 
   
Made in gb
Avatar of the Bloody-Handed God






Inside your mind, corrupting the pathways

 Snrub wrote:
This is amazing. Is that thing with the white head a clay shaper?


Yes. The white tip denotes it is a "soft" tip.

   
Made in us
Waaagh! Warbiker






This is amazing. I may end up trying to make a few of these.

My one criticism is that I feel like the bulking out of the torso should also apply to the top. The terminator armor just seems very "thin" on the top compared to the rest.

The Seraphs of Thunder: a homebrew, almost entirely converted successor Deathwing. And also some Orks. And whatever else I have lying around. 
   
Made in us
Fresh-Faced New User






"Next remove the feet completely. You will not need to keep them, they can be clipped off and discarded."

That should read, "Feet will now be clipped off and they will ricochet around the room, becoming ballistic projectiles around your work area, shattering picture frames, putting out eyes and generally doing about as much damage as small caliber pistol fire."
   
Made in us
Blood Angel Terminator with Lightning Claws





North West Arkansas

Nice work, very tallented! What is the tool you used in the shaping process, it looks like some sort of soft tipped wedge?

Crush your enemies, see them driven before you and to hear the lamentations of the women.

Twitter @Kelly502Inf 
   
Made in se
Imperial Recruit in Training





Presumably at my desk.

I stand at attention and salute your sculpting. This is awesome!

 cluegiver wrote:
"Next remove the feet completely. You will not need to keep them, they can be clipped off and discarded."

That should read, "Feet will now be clipped off and they will ricochet around the room, becoming ballistic projectiles around your work area, shattering picture frames, putting out eyes and generally doing about as much damage as small caliber pistol fire."


And this is hilarious!

   
Made in gb
Gangly Grot Rebel






I really like how grenstuff listens your hands...

Cheers


#Warmongers 
   
Made in us
Perfect Shot Black Templar Predator Pilot




Roseville, CA

With all the Greenstuff work I feel like you may as well skip the terminator base altogether...you could sculpt it from scratch abd it would be almost the same amount of work. Really nice work though
   
Made in de
Longtime Dakkanaut





Germany

Off topic but I'd love to know: the yellow termi in the last picture... did you just prime him white and then yellow wash followed by some reddish-brown wash...?

Waaagh an' a 'alf
1500 Pts WIP 
   
Made in us
Flashy Flashgitz





Pacific Northwest

Wow, beautiful work. I can't even make a sandbag with greenstuff. Wonderful work. I also would like to comment on the yellow termy, nice paint job.

__________________________________________

Gorgrimm 'Eadsplittas Bad Moons
Aegis Guard Space marines


"For every battle honor, a thousand heroes die alone, unsung, and unremembered"

My External Space Marine Blog



 
   
Made in de
Fresh-Faced New User





Pretty cool tutorial.
   
Made in de
Xenohunter with First Contact





Cologne

Very helpful!thank you for sharing
   
Made in us
Regular Dakkanaut






Love the tutorial! My proxy at work blocks the images... :( I will have to stop back and check out the image goodness when i get home!

This message was edited 2 times. Last update was at 2014/02/27 19:06:23


1500 Dark Angels( 9 - 4 - 0 )
Humility must always be the portion of any man who receives acclaim earned in the blood of his followers and the sacrifices of his friends.
- Dwight D. Eisenhower




 
   
Made in us
Hellacious Havoc






Love this, I have to give this a try

The wolves go for the throat.
We go for the eyes.
Then the tongue.
Then the hands.
Then the feet
Then we skin the crippled remains. 
   
 
Forum Index » Painting & Modeling Tutorials
Go to: