110447
Post by: myszopek
I started the largest and most ambitious project so far. I hope I'll finish it, which is not at all certain (my drawers are full of infinite models)
DIY pocket orks battleship. This is not a gaming model, but rather diorama or LoS blocker. Planned dimensiones: lenght - 50 cm, hight - 50 cm, widht - 40 cm. I've started a month ago and estimate it will take me about six months.
Like all my other models, it's a great improvisation (I do not make plans and schemes, just take a parts and glue and... done!)
Hull was made from styrofoam, covered with cardboard and HIPS. Towers made mainly from HIPS. Nothing is finished yet
12
95040
Post by: Guildenstern
Brilliant!! also very appropriately orky! can't wait to see more =D
110447
Post by: myszopek
As You wish
Recent work:
3
518
Post by: Kid_Kyoto
This is impressive!
Subscribing!
120056
Post by: Frodeck
Excelent work
110447
Post by: myszopek
Thanks for feedback. Today's upgrade: side zappa and bridge with primer.
3
113751
Post by: Vallhund
Bloody brilliant mate! Will definitely be waiting for more progress!
34385
Post by: doktor_g
I can't wait to see this!!!!!
113856
Post by: ordoteutonicus
very good start indeed
95040
Post by: Guildenstern
That's looking awesome - I like the bridge a lot
110447
Post by: myszopek
I changed conception of the chimney. New is better of course
2
24078
Post by: techsoldaten
Love what I am seeing. Great work!
110447
Post by: myszopek
I have not much free time lately, but still working
Now I'm building a cabin at the deck level.
1
98217
Post by: Skinflint Games
This is insane!! So very, very subbed :-)
110447
Post by: myszopek
Little update.
I made stairs and doors leading under deck. And started building a quarterdeck (I'm not sure about English name
4
120056
Post by: Frodeck
Impressive, as usual
110447
Post by: myszopek
Section of radars and antennas. Base is a piece of printer toner cartidge. I also used a spring from some electronic device, and suspension of toy car (small radar). Big radar made of HIPS polystyrene
2
110447
Post by: myszopek
Skull on the ship's prow. Left eye will be a spotligt.
2
110447
Post by: myszopek
I had to put together elements I've made so far (temporarily to check folding of individual parts). And by the way I took a picture.
Rhino is only for comparison of size
1
110447
Post by: myszopek
I've done main engine. It's a CPU fan, HIPS, cardboard and part of Tamiya M3 Lee tank's hull. I also used part of CDROM drive as a connector, thanks to which the motor can rotate.
I also added another floor to quarterdeck.
7
112604
Post by: SuspiciousSucculent
This will make an amazing centerpiece! The hulking size of it combined with the sheer orkiness of it blows me away. Keep up the excellent work
116601
Post by: Syro_
This is looking great, I'm looking forward to seeing more. I especially like the turrets and comms section you made.
110447
Post by: myszopek
Gatling gun turret. Made from body cream jar, a piece of old MP3 player, HIPS and styrene pipes. Weld grom green stuff. Screws are cuted from hexagonal styrene rods.
2
110447
Post by: myszopek
Two turrets painted with primer.
4
120056
Post by: Frodeck
Finally dakka!
98217
Post by: Skinflint Games
This is lunacy of the highest order! Keep it up :-)
120056
Post by: Frodeck
It deserve a full pirate ork crew
110447
Post by: myszopek
Under Jolly Roger it's the only way
1
110447
Post by: myszopek
Something for Easter eggs finders
Bomb made from wooden egg
2
116601
Post by: Syro_
That orky Jolly Roger turned out great! And I really like the idea of using an Easter egg for a large bomb, it looks great, I'll have to try that.
110447
Post by: myszopek
I added a rocket launcher to the hull (still in a WIP phase). When I finish, I will start with the build of rocket.
Launcher built of GPU's fan and HIPS.
2
110447
Post by: myszopek
Few new details.
There's never enough skulls I made another one - for rocket launcher.
I've start also building of new flakk. I was not completely satisfied with the previous one. New one will be will be inspired by the Kromlech model. On the picture is a ammo box (with small skull, because... there's never enough skulls ). I'm particularly pleased with the padlock.
3
110447
Post by: myszopek
Little upgrade
4
110447
Post by: myszopek
In the meantime I make the hull sheating. This is the most arduous and boring part of work. But necessary: details makes the final effect. I did not like cardboard sheating, which I did before. So I covered it one more, with HIPS.
And for dessert: next step with rocket launcher.
5
120056
Post by: Frodeck
This is almost too good
110447
Post by: myszopek
Hi!
Ramp for landing troops, made from part of toner cartridge. And ladder: leavings from 1:35 scale military models (steps made from cuted tank track links).
2
81837
Post by: Cleatus
I've been enjoying watching your build. Looking good.
105215
Post by: TheEldanariPrince
When i saw the title i was like "ooh, Battlefleet Gothic." Madness.
101497
Post by: Heretic Tom
Awesome work so far!!
51769
Post by: Snrub
This is the best type of Orky madness!
Following for more.
110447
Post by: myszopek
Yes. I know that is misleading But in 40k there is no equivalent of this size ship.
And here is new stuff: battering ram.
2
110447
Post by: myszopek
Look at the progress made so far.
1
110447
Post by: myszopek
Stern cannon turret (or stern cannon shed ).
Made among others from HIPS, pen, syringe, bottle cap and toner cartridge cogs. Barrel from Tamiya WWII set.
8
120823
Post by: Waaagh_Baraon
Wow that is a total awesome build, I can't believe I missed this project!
Hey whats that black panel your using?
110447
Post by: myszopek
Thanks for feedback
Waaagh_Baraon wrote:Wow that is a total awesome build, I can't believe I missed this project!
Hey whats that black panel your using?
Flat surfaces are made from High Impact Polystyrene (HIPS). I use sheets of varying thickness and colors. Black is basic, because I have a lot of it. I got a huge sheet from a friend who makes advertising banners out of it. Main advantage of this material is that it can be glued with ordinary modeling glue.
120823
Post by: Waaagh_Baraon
Thanks for the info, I got to say it looks amazing, I've tried three times to make a big ship every time I've abandoned the build.
51769
Post by: Snrub
The battleship is coming along nicely!
The big ol atom bomb sitting on the desk, where's that from?
99
Post by: insaniak
Fantastic work!
110447
Post by: myszopek
Snrub wrote:
The big ol atom bomb sitting on the desk, where's that from?
It's a wooden Easter egg.
I built rokkit for my launcha. Only the top because the rest will be invisible. And I finish work on torpedo, adding bolts and a handle.
3
51769
Post by: Snrub
Clever. Looks the part, that's for sure.
Those wire on the torpedo, are they just for show or will the be lights/sounds?
110447
Post by: myszopek
Snrub wrote:
Those wire on the torpedo, are they just for show or will the be lights/sounds?
Just for show. I have no idea about electricity. When I change batteries in a flashlight, I call the service And seriously speaking: nothing better pretends to be a cable than a real cable
81837
Post by: Cleatus
Looking good!
26800
Post by: Commander Cain
Seriously incredible build! I just love how much detail you have managed to squeeze into every corner, one of the best Orky builds I have ever seen
110447
Post by: myszopek
It's nice to read such comments Thanks.
My ship was unstable, so I added stabilizer with vertical start propellers (HIPS, part of toner cartridge and GPU fans).
It will be painted separately, and glued then, so I painted this part with primer. This model is too big to paint all the elements joined together.
By the way I painted the side zzap gun.
5
98217
Post by: Skinflint Games
This is just brilliant.
Now, if enough of us believe it, IT WILL FLY!
110447
Post by: myszopek
It was already flying. Mainly sideways and down. That's why I had to add a stabilizer
I had some free time and here are the effects: medium rokkit launcha. Built of polystyrene, toothpicks box, coffee stick and some wires. Rokkits made from milliput.
5
51769
Post by: Snrub
That rocket launcher is ace. It's the small details like the wires make it authentic.
I think the only thing it lacks are exhaust ports. But then again.... It is an Ork rocket launcher, so.....
110447
Post by: myszopek
Snrub wrote:
I think the only thing it lacks are exhaust ports.
Oops... My mistake. The recoil will be larger or a few gretchins will die
If we're talking about gretchins: the first crewman is on board. I had to paint it now, because its cabin will be closed and will be an integral part of the hull. Windows will be transparent, so I used clear styrene and masked with Tamiya tape before painting. If something goes wrong I will paint windows too.
2
110447
Post by: myszopek
Captain on the bridge. Almost. For now on a cork of wine
Warboss with head from Spellcrow
1
116601
Post by: Syro_
That new head really changes the look and feel of the black reach warboss. Looks like the gun arm is different too? That hand is massive.
110447
Post by: myszopek
Syro_ wrote:Looks like the gun arm is different too? That hand is massive.
I don't know. That's a secondhand mini. I bought it assembled and painted. I spread it into pieces, washed and glued it again. I do not know what the previous owner changed but I only changed the head.
Small update.
It's time to give a name to the ship. I'm just wondering if the board is too big.
2
110447
Post by: myszopek
New thing for a ship's bow. I have no idea what it could be for, but it looks good
Submarines had a net cutter on the bow, but this is not an U-Boot.
1
103438
Post by: ZoBo
it's a ship-scale choppa!
110447
Post by: myszopek
Sounds good
I made a catch (crane) for the bomb. It's just a dummy, because the bomb is magnetized and attached directly to the hull. Magnet simultaneously holds the chain.
4
42839
Post by: stonned_astartes
My god, scratch building level 100. such great stuff here.
113340
Post by: ChargerIIC
So many bolted on armor plates. Ork players know it takes a lot of hard work to make something look slapped together.
106010
Post by: Meer_Cat
Great job- ramming speed!
The crane for the bomb load is terrific, the obvious sort of place you'd find a grot, tinkering!
110447
Post by: myszopek
Thanks. Positive response is the best motivation
@Meer_Cat: I have a lot of figures for this project but only orks, no grots. But I like this idea
Recent progress. I tested the paining scheme. I do one or two models a year, so every time I have to learn painting almost from scratch
1
98217
Post by: Skinflint Games
This gets more mental every time I check in! Props to you OP, love it :-) nice job on the hazard stripes too - and I suck at hazard stripes, so very jealous here
110447
Post by: myszopek
Thanks Skinflint!
I would like to finally finish construction and start painting but it can't be done. I still find some details that I've forgotten about and which I need to finish. For example, flakk. I had no concept how to build ammo magazines so I put it aside. And I forgot about it
I have found and finished it now.
I made magazines from toy car wheels and a styrene strip.
6
101497
Post by: Heretic Tom
Just wow dude, this is going to be incredible!!
26800
Post by: Commander Cain
Ridiculously beautiful as always! Great looking paint style as well.
I do think that the name on the ship is a little large though, seems to detract from all the other details in that area, it would probably look great on a large display base though if that was something you were planning?
Are you going to give the ship a big mean looking anchor? A big grabby thing for docking or boarding could look awesome if you have any space left on this beast!
20895
Post by: karimabuseer
Phenomenal attention to detail bro!
42839
Post by: stonned_astartes
Mega stuff as always!
120056
Post by: Frodeck
I realy enjoy this thread
106010
Post by: Meer_Cat
What a fantastic build on the quad AAA! I'm printing a copy of that picture off to use as a guide for my own attempt to build something like that!
14266
Post by: faultie
That quad gun is amazing. You captured a real WWII battleship feel to it. Can’t wait to see how this thing finally ends up.
110447
Post by: myszopek
Commander Cain wrote:
I do think that the name on the ship is a little large though, seems to detract from all the other details in that area, it would probably look great on a large display base though if that was something you were planning?
You're right. It's too big
Commander Cain wrote:
Are you going to give the ship a big mean looking anchor? A big grabby thing for docking or boarding could look awesome if you have any space left on this beast!
Aye aye, sir!
Heretic Tom, karimbuseer, stoned_astartes, Meer_Cat, faultie and Frodeck: thanks. But as I wrote, when I started building this: inspiration was the existing model produced by Kromlech. Google can show you how it looks.
110447
Post by: myszopek
Next cannon is ready.
A piece of an old VHS camera as a base, pen, some old bits and polystyrene sheets.
6
26800
Post by: Commander Cain
Good stuff as always, I love how your guns all look like they could actually function in real life, adds an extra bit of realism!
106010
Post by: Meer_Cat
Excellent build! 3 inch sub-chaser, yessiree!
110447
Post by: myszopek
Hi!
Construction works are going to the end. I hope that in the next post I will show you the whole ship assembled and primed.
In the meantime, I made railings for the main deck. I waited with this to the end, because I was afraid that they would break when manipulating the model during construction. I also prepare places for the assembly of turrets. One of the photos with railings shows the launcher base. Last one is base for newest cannon. The assumption is that all possible elements can be painted separately and attached after painting.
4
106010
Post by: Meer_Cat
Continuing awesome build- love the Sea Sparrow missile launcher I can see on the foredeck now!
9910
Post by: CommissarKhaine
I always love looking in on this thread; that's some dedication building this monster!
110447
Post by: myszopek
It seems that after half a year I managed to finish the construction. The photos are not the best but model is so big that photographing it is a challenge
In the pictures there is everything except the bridge (it's too heavy to attach it with blue tack).
4
65595
Post by: Camkierhi
Really amazing work. This is epic.
94668
Post by: Strohkopf
Absolutely super cool!
51769
Post by: Snrub
That's pretty fething fantastic.
20983
Post by: Ratius
*heavy breathing intensifies*
98217
Post by: Skinflint Games
Jesus. That's insane - what a feat!
9910
Post by: CommissarKhaine
That thing is simply amazing. Can't wait to see some paint on it
110447
Post by: myszopek
Thanks!
I'm still looking for a painting scheme. And I'm still not completely satisfied
1
42839
Post by: stonned_astartes
That’s a hell of a ship, well done on completion and the painting looks promising.
120056
Post by: Frodeck
I like the scheme Enough dirty and rusty
110447
Post by: myszopek
First turret is painted. I've been experimenting with salt chipping, I've never used this method before. Even pretty nice
2
35419
Post by: Lamby
Just read through all 4 pages of orky magnificence!!!
Truly a scratch-building masterpiece!
Your salt chipping looks nice, one of the best ways of chipping I've found too - nice and random, especially if you use some different sizes of salt grains.
Looking forward to more updates!
9910
Post by: CommissarKhaine
Salt chipping seems to he working out very well. Lovely work! One minor nitpick: the inside of the rusty bit pointing up is still white on the inside (unless another bit will fit in there, of course).
26800
Post by: Commander Cain
One million thumbs up! Great looking paint scheme
34385
Post by: doktor_g
Beautiful!
110447
Post by: myszopek
I'm glad you like it. And thanks for the favorable comments .
Small update: I painted stern cannon shed. There is a place on the roof for two more turrets, not painted yet
2
65595
Post by: Camkierhi
OK so you can paint then!!
Bloody amazing sir.
110447
Post by: myszopek
Recently, I do not have much time to paint. Progress is therefore small.
I painted the skull for a ship's prow (the yellow eye is a spotlight), steersman and radar screen.
Enjoy
7
120056
Post by: Frodeck
Waagh! Is strong in this one!
65595
Post by: Camkierhi
Excellent work, the level of detail and the work you are putting into the individual pieces is inspiring and breathtaking bud, mammoth task. I am going to be working on a big project or two myself shortly and this is really making me think about how hard I need to push.
9910
Post by: CommissarKhaine
Slow and steady wins the race, you're doing great work! For the ork's skin: if you want to take away some of the chalkiness (some people like it, some don't), a mix of 1/3 green wash, 1/3 yellow or brown, 1/3 water will add a veyr nice glaze and bring some warmth tot he kin.
110447
Post by: myszopek
Thanks!
Unfortunately, the pace of work has recently slowed down. After six months it is still far from the end. Working on this model takes a lot of time and I'm bored
Either way, progress is small
4
110447
Post by: myszopek
I applied a layer of rusty colors to the hull. All paints from Vallejo - base is flat brown, the others are: hull red, cavalry red and orange brown. The whole is secured with a satin vallejo varnish on which I will apply AK Interactive chipping medium. The bottom part of the hull will be light blue, top yellow. Unless I change my mind
2
113340
Post by: ChargerIIC
You should just go to random events, plop that thing on the table and say 'forgeworld'. I wonder how many will panic,
110447
Post by: myszopek
ChargerIIC wrote:You should just go to random events, plop that thing on the table and say 'forgeworld'. I wonder how many will panic, A tempting thought. But unfortunately I'm not playing, I'm just building models Hull painted with base colors. Now the most time-consuming part of the painting job: weathering
2
65595
Post by: Camkierhi
This is going to be soooo epic.
110447
Post by: myszopek
That's how it looks now.
1
116849
Post by: Gitdakka
Omg wow! This is insanely good
20983
Post by: Ratius
Just a whole bucket of win.
10575
Post by: vonjankmon
That thing is a serious master piece.
42839
Post by: stonned_astartes
Mental good.
120056
Post by: Frodeck
Impressive, as always
60383
Post by: Tremble
Love this build!
Gonna steal some ideas - the gun turrets and radar particularly inspire me!
9910
Post by: CommissarKhaine
Wow.
Not much more to add, really.
57070
Post by: SJM
Love the chipping on the yellow, looks great with the rust.
I think I’d work on the ork skin, looks a little chalky, I’d honestly try a light purple wash, do a test, a treat on green skin.
110447
Post by: myszopek
Reading such comments is very nice
SJM wrote:
I think I’d work on the ork skin, looks a little chalky, I’d honestly try a light purple wash, do a test, a treat on green skin.
I know but I don't like paintig minis. Above all, I am a builder, this is part of the modeling I like the most. Painting characters is a necessary evil for me. Yes, I know it sounds like heresy here
23704
Post by: ceorron
Cool project, love it. Should look really impressive when painted. Really good attention to detail.
57070
Post by: SJM
myszopek wrote:Reading such comments is very nice
SJM wrote:
I think I’d work on the ork skin, looks a little chalky, I’d honestly try a light purple wash, do a test, a treat on green skin.
I know but I don't like paintig minis. Above all, I am a builder, this is part of the modeling I like the most. Painting characters is a necessary evil for me. Yes, I know it sounds like heresy here
Fair enough, build away, looking good.
110447
Post by: myszopek
I'm still struggling with laziness and boredom in this project. Getting back to work is getting harder and harder..
3
65595
Post by: Camkierhi
This is still one of the most magnificent and wonderful projects going at the moment, so much win.
I know the feeling, it can be hard, but just sit back and take a breath and look at that thing, you know you have to finish it, it is not far to go now.
116601
Post by: Syro_
Cam's right, it looks really close to finish. This beautiful piece deserves to get done
518
Post by: Kid_Kyoto
Lazy is not the word I would use...
AWESOME! Just too much awesome to process. That's the issue.
55962
Post by: Warlord_ky
Looking great.
110447
Post by: myszopek
Thanks!
What motivates me most is that I know well: if I put it aside for a moment, I will never come back to it. Removing something from the workshop is a death sentence for the project... That was the case with many models so far. Among others scratchbuilded gorkanaut, finished in 95 percent, and several tanks from the Second World War. So I try not to give up
Main propeller finished:
3
26800
Post by: Commander Cain
Beautiful stuff! I love all the detail you are cramming into every piece, it's going to look incredible once finished
110447
Post by: myszopek
Commander Cain thanks!
Little update. Bomb, rokkit and radar section finished.
6
65595
Post by: Camkierhi
Stunning. Really appreciate the effort you are putting in.
47037
Post by: jac_boj
Whoa...what a project!!! Thanks for sharing
116601
Post by: Syro_
I like the bomb, was it made from an Easter egg?
110447
Post by: myszopek
Camkhieri, jac_boj, Syro_ thanks!
Syro_ Yes. That's wooden Easter egg
110447
Post by: myszopek
Hi everyone!
Torpedo finished. As I think
3
122770
Post by: Swaelg
I went through the whole thread and I do not regret it. This mad construction is so inspiring, even though I do not own a single Ork miniature.
66454
Post by: Alphabet
That is brilliant.. Seriously well done!
116601
Post by: Syro_
Looks very good. How close are you now to the entire thing being done?
110447
Post by: myszopek
Thanks!
Syro_ wrote:How close are you now to the entire thing being done?
It depends on the definition of "entire thing done" There are only several elements to be finished, visible in the picture below.
But some things broke off when painting, I need to fix it. Ship needs a vignette/base. For now, I did not even think about it. And last but not least: crew. I've painted only one ork so far. I have a dozen or so
1
116601
Post by: Syro_
Still amazingly close with how much you have already accomplished, keep up the good work
110447
Post by: myszopek
Next part finished. One step closer to the end.
Anti-aircraft gun inspired by the Kromlech's Ork Flakvierling
Enjoy!
3
2889
Post by: Jin
Lookin' fantastic! Can't wait to see it all together.
110447
Post by: myszopek
This moment is getting closer
I finished painting the rokkit launcha turret. I also started sticking decals on some elements. I use an ork vehicle set and old decals for WWII tanks.
1
106010
Post by: Meer_Cat
The finished AA mount looks great! I remember rthe pics where you scratchbuilt it essentially from junk- wonderful build!
17738
Post by: Briancj
I kinda want to send you a box of grots.
110447
Post by: myszopek
I've also got a telescope for the captain. It is a brass element of an electronic device, mounted on a plastic rod with green stuff. And a laser lens from a CD-ROM as a telescope lens.
And one more machine gun with a gunner
5
116601
Post by: Syro_
Wow, good eye for bits with that telescope build
110447
Post by: myszopek
Telescope finished. I also painted big zzappa
Syro_ wrote:Wow, good eye for bits with that telescope build
It's easy if you have a large collection of "junk". Last picture shows part of my resources
5
98217
Post by: Skinflint Games
112604
Post by: SuspiciousSucculent
Is there such a thing as enough dakka? Probably not. But if there were, this would be it, and you would be Mork's (or possibly Gork's) favorite.
Amazing work!
113121
Post by: petrov27
Amazing! That thing is so full of awesomeness it is hard to look at it full on without my head exploding
Kudos all the way at building and finishing something incredible
17738
Post by: Briancj
No, sir. Allow me to politely disagree.
Done is done, and no there's no need to think you did things wrong, or worse, or that you could have done better.
Two of my favorite phrases of advice: "Good enough is better than best." and "Perfection is the enemy of Finished."
You have created a magnificent piece, AND pushed through a couple of tough moments where you were tempted to abandon the project.
GREAT JOB.
--Brian
120033
Post by: Excommunicatus
That should be exhibited at MOMA.
It is wondrous.
116601
Post by: Syro_
Congratulations! What a beautiful piece you've created. The months of hard work really show.
65595
Post by: Camkierhi
So beautiful, so awesome, so inspiring. You are a master of the arts bud, true master. Brings a tear to the eye.
98217
Post by: Skinflint Games
Wow. That is utterly magnificent. Congratulations OP, and thanks for sharing the journey
76685
Post by: Singleton Mosby
That's just utterly awesome. I love it!
Consider me (more then) inspired and looting some of your wonderfull ideas in the future (already based one of my mek gunz gunshield on your design.
2889
Post by: Jin
Absolutely fantastic!
It was great to see this project from the start to end!
So what's next?
110447
Post by: myszopek
Thank you very much. I did not look here for a while, because I had a small break
It's time for nurgle: https://www.dakkadakka.com/dakkaforum/posts/list/773649.page
|
|