Forum adverts like this one are shown to any user who is not logged in. Join us by filling out a tiny 3 field form and you will get your own, free, dakka user account which gives a good range of benefits to you: No adverts like this in the forums anymore. Times and dates in your local timezone. Full tracking of what you have read so you can skip to your first unread post, easily see what has changed since you last logged in, and easily see what is new at a glance. Email notifications for threads you want to watch closely. Being a part of the oldest wargaming community on the net. If you are already a member then feel free to login now.

I still have a problem with this Resin...good that a little heat can fix it...

The ResinBase Insert Marbo comes with has a Hole where the Orkhead Pin goes in and there you should position Marbo...if i do so...there is a free footprint where his standing foot is normally resting...didnt fit...you need to warm the complete miniature to bent it a little so that you have it on that spot where it belongs...otherwise you may damage his Catachan Blade that stucks inside the Orkhead (you need to glue this to a pin at the back of the Ork Head)...

Nice miniature but still with all the problems GWs resin brings with it...

Finecast. Seriously.

Well, you had my interest, think I'll pass though.

Well to be fair the newer fine casts haven't been that bad if going by that one canoness.

 ShortyPreds wrote:
I still have a problem with this Resin...good that a little heat can fix it...

The ResinBase Insert Marbo comes with has a Hole where the Orkhead Pin goes in and there you should position Marbo...if i do so...there is a free footprint where his standing foot is normally resting...didnt fit...you need to warm the complete miniature to bent it a little so that you have it on that spot where it belongs...otherwise you may damage his Catachan Blade that stucks inside the Orkhead (you need to glue this to a pin at the back of the Ork Head)...

Nice miniature but still with all the problems GWs resin brings with it...

I had the same problem but managed to get him to stick just holding him into place. The knife on mine did need some heat to bend straight tho.

Jamie Shred wrote:

 ShortyPreds wrote:
I still have a problem with this Resin...good that a little heat can fix it...

The ResinBase Insert Marbo comes with has a Hole where the Orkhead Pin goes in and there you should position Marbo...if i do so...there is a free footprint where his standing foot is normally resting...didnt fit...you need to warm the complete miniature to bent it a little so that you have it on that spot where it belongs...otherwise you may damage his Catachan Blade that stucks inside the Orkhead (you need to glue this to a pin at the back of the Ork Head)...

Nice miniature but still with all the problems GWs resin brings with it...

I had the same problem but managed to get him to stick just holding him into place. The knife on mine did need some heat to bend straight tho.

for what we pay for a GW model having to heat the entire model just to get it to work is not acceptable. death to finecast long live the plastic master race

Is marbo really 65 points?

I'll stick with my Eversor, thanks.

 ironicsilence wrote:

Jamie Shred wrote:

 ShortyPreds wrote:
I still have a problem with this Resin...good that a little heat can fix it...

The ResinBase Insert Marbo comes with has a Hole where the Orkhead Pin goes in and there you should position Marbo...if i do so...there is a free footprint where his standing foot is normally resting...didnt fit...you need to warm the complete miniature to bent it a little so that you have it on that spot where it belongs...otherwise you may damage his Catachan Blade that stucks inside the Orkhead (you need to glue this to a pin at the back of the Ork Head)...

Nice miniature but still with all the problems GWs resin brings with it...

I had the same problem but managed to get him to stick just holding him into place. The knife on mine did need some heat to bend straight tho.

for what we pay for a GW model having to heat the entire model just to get it to work is not acceptable. death to finecast long live the metal master race

FTFY...

He seems great for forcing people to keep guards in the backfield - just like deepstrikers, but cheap and with the catachan keyword

Read it wrong.

So when does this new model come out? It's been months since the announcement, and nothing more has been said.

Played a few games with him. He's incredible fragile - hasn't survived a melee phase yet, even against chafe.

Remote detonation is great for taking out small support models. Blowing a few wounds into a warlord is worth the cost of the reroll cp.

The ability to bumrush a model and knife it is pretty good *if* the target is weak enough. He whiffed a charge on a broodlord by one wound and was eaten.

 ChargerIIC wrote:
Played a few games with him. He's incredible fragile - hasn't survived a melee phase yet, even against chafe.

Remote detonation is great for taking out small support models. Blowing a few wounds into a warlord is worth the cost of the reroll cp.

The ability to bumrush a model and knife it is pretty good *if* the target is weak enough. He whiffed a charge on a broodlord by one wound and was eaten.

Right, but the physical model, is it available yet? That's what I'm asking.

 Togusa wrote:

 ChargerIIC wrote:
Played a few games with him. He's incredible fragile - hasn't survived a melee phase yet, even against chafe.

Remote detonation is great for taking out small support models. Blowing a few wounds into a warlord is worth the cost of the reroll cp.

The ability to bumrush a model and knife it is pretty good *if* the target is weak enough. He whiffed a charge on a broodlord by one wound and was eaten.

Right, but the physical model, is it available yet? That's what I'm asking.

Sly is a GW store exclusive. Not seeing it on the webstore, but I know my local GW has a few

 Togusa wrote:

 ChargerIIC wrote:
Played a few games with him. He's incredible fragile - hasn't survived a melee phase yet, even against chafe.

Remote detonation is great for taking out small support models. Blowing a few wounds into a warlord is worth the cost of the reroll cp.

The ability to bumrush a model and knife it is pretty good *if* the target is weak enough. He whiffed a charge on a broodlord by one wound and was eaten.

Right, but the physical model, is it available yet? That's what I'm asking.

You would have to go to a local GW shop. He's supposedly going to be getting a general release later on this year.

 Togusa wrote:

 ChargerIIC wrote:
Played a few games with him. He's incredible fragile - hasn't survived a melee phase yet, even against chafe.

Remote detonation is great for taking out small support models. Blowing a few wounds into a warlord is worth the cost of the reroll cp.

The ability to bumrush a model and knife it is pretty good *if* the target is weak enough. He whiffed a charge on a broodlord by one wound and was eaten.

Right, but the physical model, is it available yet? That's what I'm asking.

Sorry I was replying to the original topic of conversation. Rumor states he'll be released in March, but with a grain of salt..etc..