Switch Theme:

Two Idiots 3D Printing Service - TIPS - pirates!  [RSS] Share on facebook Share on Twitter Submit to Reddit
»
Author Message
Advert


Forum adverts like this one are shown to any user who is not logged in. Join us by filling out a tiny 3 field form and you will get your own, free, dakka user account which gives a good range of benefits to you:
  • No adverts like this in the forums anymore.
  • Times and dates in your local timezone.
  • Full tracking of what you have read so you can skip to your first unread post, easily see what has changed since you last logged in, and easily see what is new at a glance.
  • Email notifications for threads you want to watch closely.
  • Being a part of the oldest wargaming community on the net.
If you are already a member then feel free to login now.




Made in us
Auspicious Aspiring Champion of Chaos





life.

Hey guys.

I just wanted to let you all know that my business partner and I have our webstore up and running now.

We are also an official licensed printer for Peculiar companions (a patreon with some sweet fantasy stls).

We are working on adding listings to the store, but I would appreciate it if you guys throw us a view and tell me what you think of it so far.

I'm also happy to answer any questions you may have

https://two-idiots-printing-service.myshopify.com/


(Admins, please message me if this needs to get taken down. I'm happy to comply. I just wanted to post something because i have not yet received a response to my query.)

This message was edited 58 times. Last update was at 2021/12/07 04:41:58


I collect:

Grand alliance death (whole alliance)

Stormcast eternals

Slaves to Darkness - currently Nurgle but may expand to undivided.
 
   
Made in us
Legendary Master of the Chapter





SoCal

So, it looks like $2.50 per miniature, yes? What does shipping to addresses in the US cost?

Also, will you be expanding your catalogue to include their African themed army?

   
Made in us
Auspicious Aspiring Champion of Chaos





life.

 BobtheInquisitor wrote:
So, it looks like $2.50 per miniature, yes? What does shipping to addresses in the US cost?

Also, will you be expanding your catalogue to include their African themed army?


1. 2.50 per infantry figure,with bu]k deals using the drop down.

Yes, the African greenskins will be added next. Honestly it's just a matter of getting the listings up.


Automatically Appended Next Post:
 BobtheInquisitor wrote:
So, it looks like $2.50 per miniature, yes? What does shipping to addresses in the US cost?

Also, will you be expanding your catalogue to include their African themed army?


We've begun to add the Benin Empire greenskins to the shop

This message was edited 2 times. Last update was at 2020/11/03 17:44:35


 
   
Made in us
Regular Dakkanaut




Cool! I love seeing the entrepreneurial spirit during lockdown. Good luck with it.

I am understanding the addiction of 3D printing now for the first time.,
   
Made in us
Auspicious Aspiring Champion of Chaos





life.

rgdgaming wrote:
Cool! I love seeing the entrepreneurial spirit during lockdown. Good luck with it.

I am understanding the addiction of 3D printing now for the first time.,


Thanks. It is quite fun.

Honestly, being able to help people build big armies is an enjoyment factor for me. to say nothing about building my own collection.

Granted, I am used to gaming with large units of figures too, so its fun to see that epic scale brought to the tabletop again.

I collect:

Grand alliance death (whole alliance)

Stormcast eternals

Slaves to Darkness - currently Nurgle but may expand to undivided.
 
   
Made in us
Legendary Master of the Chapter





SoCal

Would you be open to printing files for clients? For example, I pledged for Raygun Raptors and Asian Adventures, but I don’t have a great printer. Would you offer a service where I could send you a file for you to print in resin?

   
Made in us
Auspicious Aspiring Champion of Chaos





life.

 BobtheInquisitor wrote:
Would you be open to printing files for clients? For example, I pledged for Raygun Raptors and Asian Adventures, but I don’t have a great printer. Would you offer a service where I could send you a file for you to print in resin?


Sure. We would consider that renting printer time and paying for materials. Send us an email at twoidiotsprinting@gmail.com

I collect:

Grand alliance death (whole alliance)

Stormcast eternals

Slaves to Darkness - currently Nurgle but may expand to undivided.
 
   
Made in us
Legendary Master of the Chapter





SoCal

 lord marcus wrote:
 BobtheInquisitor wrote:
Would you be open to printing files for clients? For example, I pledged for Raygun Raptors and Asian Adventures, but I don’t have a great printer. Would you offer a service where I could send you a file for you to print in resin?


Sure. We would consider that renting printer time and paying for materials. Send us an email at twoidiotsprinting@gmail.com


Thank you.

I’ll send some inquiries shortly after the election. Or perhaps not quite so shortly. Depends how it goes.

   
Made in us
Auspicious Aspiring Champion of Chaos





life.

 BobtheInquisitor wrote:
 lord marcus wrote:
 BobtheInquisitor wrote:
Would you be open to printing files for clients? For example, I pledged for Raygun Raptors and Asian Adventures, but I don’t have a great printer. Would you offer a service where I could send you a file for you to print in resin?


Sure. We would consider that renting printer time and paying for materials. Send us an email at twoidiotsprinting@gmail.com


Thank you.

I’ll send some inquiries shortly after the election. Or perhaps not quite so shortly. Depends how it goes.


Understood.

I collect:

Grand alliance death (whole alliance)

Stormcast eternals

Slaves to Darkness - currently Nurgle but may expand to undivided.
 
   
Made in us
Auspicious Aspiring Champion of Chaos





life.

We have added Peculiar companion's turkic-mongol dark elves to the website, and will add the rest of the units for this faction as they are released.

I collect:

Grand alliance death (whole alliance)

Stormcast eternals

Slaves to Darkness - currently Nurgle but may expand to undivided.
 
   
Made in us
Auspicious Aspiring Champion of Chaos





life.

We have added the Elf polish winged hussar (Yes you read that right, its an elf) to the webstore.

https://two-idiots-printing-service.myshopify.com/products/16th-century-english-elf-winged-hussar

I collect:

Grand alliance death (whole alliance)

Stormcast eternals

Slaves to Darkness - currently Nurgle but may expand to undivided.
 
   
Made in us
Auspicious Aspiring Champion of Chaos





life.

We have added the entire central european dwarf range to the webstore, in addition to adding a value army pack.

I must say these would be a good ally for an empire/cities of sigmar army.

https://two-idiots-printing-service.myshopify.com/collections/15th-century-central-european-dwarves

I collect:

Grand alliance death (whole alliance)

Stormcast eternals

Slaves to Darkness - currently Nurgle but may expand to undivided.
 
   
Made in us
Dangerous Outrider




Baltimore, MD USA

I placed an order for 5 Spanish knights and the Spanish knights hero.

The customer service was very good, I had done questions which were responded to very quickly. Namely the material being used, I am not a fan of translucent material so asked if I could get in opaque. The response was, yes. Just send them a note when ordering. The resin might be grey ot could be colored,

So, I placed my order. I believe it was 2 days after I placed my order that I received a shipping notice.., and 2 days for scheduled delivery with tracking. Very fast. Shipping, very good.

I received my order today. I received an extra Knight, and I thought I was supposed to recieve 1 weapon choice per knight, but actually received 5 swords, 5 hammers, 7 lances 5 trumpets and 5 pistols, bonus stuff is always appreciated, great stuff.

I assembled 1 mini. I have a little complaint here, the resin bits that are used for printing are still attached to the model. This was already stated in the description so we’re not a surprise. I have never worked with a 3D print like this, so thought that they would be easy to clean up.., I think it will go better with more practice but.., well my first one did not go well. The second one went better. But overall not holding this against them.

My other complaint isn’t against two idiots, but the models themselves. The prints are a bit small compared to warhammer sized minis, I asked and they stated they could print slightly larger but there may be some detail loss and the price may be a little higher. Which is fair.

Overall I am satisfied with the purchase and am likely to buy again.

Here are some pics. That s Fireforge northmen and a Perry knight for comparison.
[Thumb - 64A1BDC5-9D2B-40FE-9B3C-BDFB8C06D47F.jpeg]

[Thumb - F5505760-4A7D-444C-BC43-5F82EF3FCCD3.jpeg]

[Thumb - 9DA21B6D-94C4-4C31-BE59-321A3E48CA55.jpeg]

[Thumb - CC589560-0993-484C-9960-5D8E37EC3066.jpeg]

[Thumb - 2044B826-EC72-46A5-B250-69100AE73100.jpeg]

[Thumb - 11F2A7C8-A8CF-4F29-8556-C691583BDD00.jpeg]

   
Made in us
Auspicious Aspiring Champion of Chaos





life.

 Smokestack wrote:
I placed an order for 5 Spanish knights and the Spanish knights hero.

The customer service was very good, I had done questions which were responded to very quickly. Namely the material being used, I am not a fan of translucent material so asked if I could get in opaque. The response was, yes. Just send them a note when ordering. The resin might be grey ot could be colored,

So, I placed my order. I believe it was 2 days after I placed my order that I received a shipping notice.., and 2 days for scheduled delivery with tracking. Very fast. Shipping, very good.

I received my order today. I received an extra Knight, and I thought I was supposed to recieve 1 weapon choice per knight, but actually received 5 swords, 5 hammers, 7 lances 5 trumpets and 5 pistols, bonus stuff is always appreciated, great stuff.

I assembled 1 mini. I have a little complaint here, the resin bits that are used for printing are still attached to the model. This was already stated in the description so we’re not a surprise. I have never worked with a 3D print like this, so thought that they would be easy to clean up.., I think it will go better with more practice but.., well my first one did not go well. The second one went better. But overall not holding this against them.

My other complaint isn’t against two idiots, but the models themselves. The prints are a bit small compared to warhammer sized minis, I asked and they stated they could print slightly larger but there may be some detail loss and the price may be a little higher. Which is fair.

Overall I am satisfied with the purchase and am likely to buy again.

Here are some pics. That s Fireforge northmen and a Perry knight for comparison.


Thank you for the review Smokestack. If you need advice on working with resin prints send us an email or throw me a PM here on dakka. Happy to give some pointers as needed.

I collect:

Grand alliance death (whole alliance)

Stormcast eternals

Slaves to Darkness - currently Nurgle but may expand to undivided.
 
   
Made in us
Auspicious Aspiring Champion of Chaos





life.

​We have added Peculiar Companions new infantry command for the Dark elves to the webstore. Get your prints today



​https://two-idiots-printing-service.myshopify.com/products/turkic-mongol-dark-elf-infantry-command​

I collect:

Grand alliance death (whole alliance)

Stormcast eternals

Slaves to Darkness - currently Nurgle but may expand to undivided.
 
   
Made in us
Auspicious Aspiring Champion of Chaos





life.

By request, i have put together some scale shots with the peculiar companions spanish beside fireforge and oathmark plastics, and in the case of cavalry a perry sculpt as well.


Scale shots https://imgur.com/gallery/XABpUc7

I collect:

Grand alliance death (whole alliance)

Stormcast eternals

Slaves to Darkness - currently Nurgle but may expand to undivided.
 
   
Made in us
Auspicious Aspiring Champion of Chaos





life.

Hey everybody. We've picked up a license with Tim's war games works who makes game trackers suitable for a certain dark and grim far future game. We currently have the space Pharaohs set up on the web store. Please feel free to check it out and let me know if you have any questions.

https://two-idiots-printing-service.myshopify.com/collections/fdm-gaming-aids

EDIT:

Make that his entire range of game trackers

This message was edited 1 time. Last update was at 2020/11/17 01:45:09


I collect:

Grand alliance death (whole alliance)

Stormcast eternals

Slaves to Darkness - currently Nurgle but may expand to undivided.
 
   
Made in us
Auspicious Aspiring Champion of Chaos





life.

The latest tracker from Tim'sMiniWargamesWorks is up on the website. This time its plague ridden and diseased, for the truly darkest of cultists.

https://two-idiots-printing-service.myshopify.com/collections/fdm-gaming-aids/products/copy-of-armored-battle-convent-sisters-wargame-game-tracker-1

This message was edited 1 time. Last update was at 2020/11/17 19:39:13


I collect:

Grand alliance death (whole alliance)

Stormcast eternals

Slaves to Darkness - currently Nurgle but may expand to undivided.
 
   
Made in us
Auspicious Aspiring Champion of Chaos





life.

printed example of one of the trackers to show quality


I collect:

Grand alliance death (whole alliance)

Stormcast eternals

Slaves to Darkness - currently Nurgle but may expand to undivided.
 
   
Made in us
Legendary Master of the Chapter





SoCal

Does the current edition of 40k require that much tracking?

I haven’t played since 4th edition.

This message was edited 1 time. Last update was at 2020/11/18 21:48:21


   
Made in us
Auspicious Aspiring Champion of Chaos





life.

 BobtheInquisitor wrote:
Does the current edition of 40k require that much tracking?

I haven’t played since 4th edition.


Yes. unless you are just playing without objectives, then that section is unnecessary.


I collect:

Grand alliance death (whole alliance)

Stormcast eternals

Slaves to Darkness - currently Nurgle but may expand to undivided.
 
   
Made in us
Auspicious Aspiring Champion of Chaos





life.

TIPS is happy to announce that we have loaded a one-stop deal to get started playing Essence of war with Dwarven holds.


https://two-idiots-printing-service.myshopify.com/products/copy-of-essence-of-war-dwarf-holds​


This bundle deal allows you to buy the core troops you need to fulfill the Dwarf Holds list for Essence of war. Currently, the hold guardians are represented by Peculiar companions Heavy infantry dwarves at 250%%. When we license a more appropriate model set these will be replaced.

the Essence of war list is

1 thane (shield - not pictured with shield but will be provided)

10 marksmen with crossbows

10 Greybeards with shields

2 hold guardians


What this deal includes:

1 Dwarf commander on foot (comes with all weapon options and a shield)

10 peculiar companions dwarf crossbowmen (marksmen with crossbows)

10 Peculiar companions medium infantry dwarves with light infantry dwarves shields and maces. (greybeards)

2 peculiar companions heavy dwarf infantry printed at 250% file size. (hold guardians)


To assist in the development of this version of the 9th age, we are also running a promotion.

If you buy our deal and actively contribute to the project by writing a battle report and posting it in the following thread (and emailing us - or messaging me on the forum - with proof of such), we are offering a 10% off code that can be used on anything in our webstore.

https://www.the-ninth-age.com/community/index.php?thread/56869-essence-of-war-battle-reports/


I collect:

Grand alliance death (whole alliance)

Stormcast eternals

Slaves to Darkness - currently Nurgle but may expand to undivided.
 
   
Made in us
Auspicious Aspiring Champion of Chaos





life.

​TIPS is happy to announce that we have licensed with Caballero Miniatures to produce and sell prints of their small but growing catalog of fantasy miniatures.



Initial offerings see the towering knightly giant, a knightly objective marker, a mounted witch-finder, and a command vignette for the empire of the sun.



https://two-idiots-printing-service.myshopify.com/collections/caballero-miniatures​






I collect:

Grand alliance death (whole alliance)

Stormcast eternals

Slaves to Darkness - currently Nurgle but may expand to undivided.
 
   
Made in us
Auspicious Aspiring Champion of Chaos





life.

​Hello all,



Quick note about our store:



We now have the peculiar companions artillery up on the website:



https://two-idiots-printing-service.myshopify.com/collections/peculiar-companions-artillery



We have also partnered with the 9th age's very own @'Thunderforge' to make his stone thrower/catapult available.


https://two-idiots-printing-service.myshopify.com/collections/miscellaneous-fdm-miniatures/products/thunderforge-designs-stone-thrower-catapult

This message was edited 1 time. Last update was at 2020/11/24 19:26:13


I collect:

Grand alliance death (whole alliance)

Stormcast eternals

Slaves to Darkness - currently Nurgle but may expand to undivided.
 
   
Made in us
Krazed Killa Kan






Columbus, Oh

 lord marcus wrote:




We have also partnered with the 9th age's very own @'Thunderforge' to make his stone thrower/catapult available.


https://two-idiots-printing-service.myshopify.com/collections/miscellaneous-fdm-miniatures/products/thunderforge-designs-stone-thrower-catapult​


404 error...

2+2=5 for sufficiently large values of 2.

Order of St Ursula (Sisters of Battle): W-2, L-1, T-1
Get of Freki (Space Wolves): W-3, L-1, T-1
Hive Fleet Portentosa (Nids/Stealers): W-6, L-4, T-0
Omega Marines (vanilla Space Marine): W-1, L-6, T-2
Waagh Magshak (Orks): W-4, L-0, T-1
A.V.P.D.W.: W-0, L-2, T-0

www.40korigins.com
bringing 40k Events to Origins Game Fair in Columbus, Oh. Ask me for more info! 
   
Made in us
Auspicious Aspiring Champion of Chaos





life.

 porkuslime wrote:
 lord marcus wrote:




We have also partnered with the 9th age's very own @'Thunderforge' to make his stone thrower/catapult available.


https://two-idiots-printing-service.myshopify.com/collections/miscellaneous-fdm-miniatures/products/thunderforge-designs-stone-thrower-catapult​


404 error...


Try this one. if it doesn't work let me know....

https://two-idiots-printing-service.myshopify.com/collections/miscellaneous-fdm-miniatures/products/thunderforge-designs-stone-thrower-catapult

I collect:

Grand alliance death (whole alliance)

Stormcast eternals

Slaves to Darkness - currently Nurgle but may expand to undivided.
 
   
Made in us
Krazed Killa Kan






Columbus, Oh



Yes, worked great

2+2=5 for sufficiently large values of 2.

Order of St Ursula (Sisters of Battle): W-2, L-1, T-1
Get of Freki (Space Wolves): W-3, L-1, T-1
Hive Fleet Portentosa (Nids/Stealers): W-6, L-4, T-0
Omega Marines (vanilla Space Marine): W-1, L-6, T-2
Waagh Magshak (Orks): W-4, L-0, T-1
A.V.P.D.W.: W-0, L-2, T-0

www.40korigins.com
bringing 40k Events to Origins Game Fair in Columbus, Oh. Ask me for more info! 
   
Made in us
Auspicious Aspiring Champion of Chaos





life.



Awesome. I've updated the links in the original post you quoted.

Thank you Porkuslime.

I collect:

Grand alliance death (whole alliance)

Stormcast eternals

Slaves to Darkness - currently Nurgle but may expand to undivided.
 
   
Made in us
Legendary Master of the Chapter





SoCal

I put in an order recently. The detail is crisp, although the translucent material makes it hard to see sometimes. I am really happy with how everything came out, and will probably order more of the Benin orcs and Turko-Mongolian elves. TIPS were really easy to work with even when some of my notes were pretty bad (“action pose full bling with sword” and such), so next time I might try something interesting, like 25% larger warboss or something. Looking forward to my next order.

Here are some pictures and some scale shots with WGA and Oathmark minis. And you can see how easy their bits are to use with HIPS minis.
[Thumb - D9F1C545-1190-4714-B056-444705B8EDFD.jpeg]

[Thumb - B1E6D18F-7909-4DAE-BBC8-FB38F9E886E8.jpeg]

[Thumb - DFBCC73B-5C3E-4523-BF93-0B41F6C1BB2E.jpeg]

[Thumb - FECAE9D7-6C92-479E-A338-0F4F3F7FE991.jpeg]


   
Made in us
Legendary Master of the Chapter





SoCal

Since the TIPS prints don’t have little planks, I cut the stand from one of my WGA minis for a better comparison.
[Thumb - D90A8F26-4EE7-4CDE-BC49-6C31E249E966.jpeg]

[Thumb - C88FBEA7-9007-4D91-8F7D-E133FA9AF318.jpeg]


   
 
Forum Index » News & Rumors
Go to: