Switch Theme:

tips for good painting......  [RSS] Share on facebook Share on Twitter Submit to Reddit
»
Author Message
Advert


Forum adverts like this one are shown to any user who is not logged in. Join us by filling out a tiny 3 field form and you will get your own, free, dakka user account which gives a good range of benefits to you:
  • No adverts like this in the forums anymore.
  • Times and dates in your local timezone.
  • Full tracking of what you have read so you can skip to your first unread post, easily see what has changed since you last logged in, and easily see what is new at a glance.
  • Email notifications for threads you want to watch closely.
  • Being a part of the oldest wargaming community on the net.
If you are already a member then feel free to login now.




Made in gb
Blood Angel Neophyte Undergoing Surgeries






ive been on a painting week since i did my ankle in climbing and am unable to even do the most simple jobs at work.

this time painting has given me a bit of experiance and some good tips id like to share.

firstly : Look After Your Brushes.
they say a bad workmen blames thier tools but painting with bad brushes will not give you the best quality work.
wash your brushes every colour change, and before the colour drys on the brush. also dont dip your brushes into the paint so it gets under the metal section of the brush, it will set here and cause the bristles to fan out..
and stand them up so you dont flatten the points a cup or mug will work

http://cgi.ebay.co.uk/14-Pcs-Acrylic-Nail-Art-paint-Brushes-Set-Brush-holder_W0QQitemZ250517058424QQcmdZViewItemQQptZUK_Health_Beauty_Nails_Manicure_Pedicure_CA?hash=item3a53faf378

tip here good brushes dont cost a bomb... shop around, i found a 12 pack of fine detail brushes for 3£ in a local craft shop.

secondly: mix your own paints.
the range of paints and lots of painting guide point towards making your own paints. this is beacuse the paints made are big jumps in hues so as a result to get natural blends you have to make the inbetween colours. the main issue i had was i mixed on a palette so once the colour had gone i had to mix more but it was never the same mix.
so once you mix a colour you like mass produce it, GW do empty pot you can use. however i perfer the dropper bottles they allow for more control.

http://cgi.ebay.co.uk/15ml-BOTTLES-TWIST-TOP-RESEABLE-DROPPER-NOZZLE-X-30_W0QQitemZ350290095196QQcmdZViewItemQQptZUK_Collectables_Bottle_Pots_ET?hash=item518eeaac5c

the transfer of paint maybe tricky but worth it.

thirdly: thin the paint.
a glop of paint painted will cover the detail no matter how much you shade and highlight it. so thin you paint on a palette. it doesnt need to be the 20£ thinner from private press, saliva and water work, just not as well.

http://cgi.ebay.co.uk/Acrylic-Paint-model-craft-kit-paint-spraying-thinner_W0QQitemZ360116533938QQcmdZViewItemQQptZUK_ToysGames_ModelKits_ModelKits_JN?hash=item53d89e3ab2

forthly: learn the stages of painting.
in every white dwarf for as long as i can recall there are articals on how to paint. read these practice on the spare plastic sprue you get with every plastic miniture. i use the 5 main stages, undercoat -- with a good quality spray, foundation -- to start the colour of the model off, ink/wash -- this will darken the recesses and pick out detail, base colour - the colour you want the model to be and finally highlight --- something light.
in the foundation starter pack is a layering chart i cant do with out shows a number of great combinations.



finnaly: learn the techiques.
i mentioned the white dwarf articals, the web also boost and untold number of videos and pages on how to master painting. all inculde techiques such as dry brushing, highlighting, blending, nmm and airbrushing. id learn them in that order and always start slow.

http://www.youtube.com/group/WarGamerCommunity



thanks for reading hope it helped and include and comments on your own personal expericane

109. Though shalt not use Lasguns as laser sights for thy Bolters.
456. Thou shalt not assume that because you can take a Bolter hit in the head, the
Guardsman over there can too.
592. Remember a 2+ armour save does not make you a Primarch.
644.Thou shalt not chant "Thirteen - nill, Thirteen - nill" at Abbadon the Despoiler.
645.Thou shalt not ask Kharn how his mates are.

If my calculations are correct SLINKY + ESCELATOR = EVERLASTING FUN

#1 pickup line of all time: "Hey, does this rag smell like chloroform to you?

They say if you play a Microsoft CD backwards, you hear satanic messages. Thats nothing, cause if you play it forwards, it installs Windows.

3000 pts
1000 pts
2000pts
 
   
Made in us
Painlord Titan Princeps of Slaanesh






Dallas, TX

My brushes soak paint all the way to the ferule. Happens every time. I dip them in, start painting....and it's up to the ferule after a very short while. I don't dip them in very much at all, it just flows upwards into it. My brushes inevitably splay out and get all ratty, and it seems like I can't avoid it.

40k Armies I play:


Glory for Slaanesh!

 
   
Made in ca
Regular Dakkanaut






Keep your brush pointed down when you paint?
   
Made in us
Gargantuan Gargant





Binghamton, NY

Paint always seems to creep up into the ferrule of brushes. There seems to be an unavoidable degree of capillary action that brings in paint and regular rinsing won't get it out. That's why I use Masters brush soap every now and again to give them a good cleaning (http://www.dickblick.com/products/masters-brush-cleaner-and-preserver/?wmcp=google&wmcid=products&wmckw=05702-1004-530). Removes pigment hiding in the bristles and softens up the gunk that likes to hang around the ferrule enough that whatever doesn't flake off on its own can be carefully picked out with a fingernail. I managed to salvage one of my girlfriend's brushes that spent over a year caked solidly in a triple-thick layer of fabric paint. For my modeling brushes, it does wonders for preserving (or reviving) the point and helps combat bristle splay.

The Dreadnote wrote:But the Emperor already has a shrine, in the form of your local Games Workshop. You honour him by sacrificing your money to the plastic effigies of his warriors. In time, your devotion will be rewarded with the gift of having even more effigies to worship.
 
   
Made in pt
Hardened Veteran Guardsman






Portugal

I'm curious about something: Most of the people I know prefer really hard brushes to paint their minis.

After accidently destroying one of the Citadel begginer brushes, I used one I had from art classes at school. It's really soft but I find its easier to just drag along things like belts and such.

What are your opinions, is this a bad habit and I should get back to using one of those hard ones?


Another thing: DO NOT BUY CRAPPY PAINTBRUSHES. Sure 1€ sounds cheap for 6 brushes, but you won't be able to use them for anything at all. That's one mistake I won't be doing thrice.

On a related note, are these cheap bristle brushes good for anything? Should I just throw them out?

This message was edited 2 times. Last update was at 2010/03/01 01:27:24


 
   
Made in us
Erratic Knight Errant





Crushy wrote:
Another thing: DO NOT BUY CRAPPY PAINTBRUSHES. Sure 1€ sounds cheap for 6 brushes, but you won't be able to use them for anything at all. That's one mistake I won't be doing thrice.

On a related note, are these cheap bristle brushes good for anything? Should I just throw them out?


I regularly buy 12-packs of brushes for $1.50 from Michael's. They're the worst brushes you've ever seen, but when you need to apply glue carefully or mix some paint they're awesome. And when their bristles get stuck together from glue or dried paint, who cares? Just throw them out! They're worth every 12 and a half cents each.

   
Made in us
PanOceaniac Hacking Specialist Sergeant





Spellbound wrote:My brushes soak paint all the way to the ferule. Happens every time. I dip them in, start painting....and it's up to the ferule after a very short while. I don't dip them in very much at all, it just flows upwards into it. My brushes inevitably splay out and get all ratty, and it seems like I can't avoid it.


I have this problem too. Then one day I bought a PP brush (the Citadel ones were out of stock at the time). Its much better because the bristles are longer, and the paint still creeps upwards but never reaches the metal bit. I don't know if this was on purpose or what I'm a painting noob but its my fave brush now.

DA:70+S--G-M+B++I+Pw40k09++DA+/hWD-R-T(BG)DM+  
   
Made in gb
Screaming Banshee






Novosibirsk, Russia

Crushy wrote:I'm curious about something: Most of the people I know prefer really hard brushes to paint their minis.

After accidently destroying one of the Citadel begginer brushes, I used one I had from art classes at school. It's really soft but I find its easier to just drag along things like belts and such.

What are your opinions, is this a bad habit and I should get back to using one of those hard ones?


Another thing: DO NOT BUY CRAPPY PAINTBRUSHES. Sure 1€ sounds cheap for 6 brushes, but you won't be able to use them for anything at all. That's one mistake I won't be doing thrice.

On a related note, are these cheap bristle brushes good for anything? Should I just throw them out?


Err, I'm not aware of anyone preferring hard brushes, I use soft 'uns too... (But I consider Citadel brushes to be soft...)

Thought I'd give the whole 'Blogger' lark a go...
-Cadian 812th (rotting in a cupboard)
-Dark Angels 3rd Company (in disfavour, eBay?)
-Irun'Mahn (pretty and deserve love; why aren't I giving them it?)
-Draigo 'n' his Merry Band (to be continued) - How to magnetise Grey Knight strike squads' two-handed and special weapons
-The Maggot Host
Klan WurldWaagh -Are now in my first P&M blog! If you like the idea of WW2 and Orks, please take a look... 
   
Made in gb
Monstrously Massive Big Mutant






I have recently found that normal artists acrilic paint brushes can be a lot better. GW brushes are a lot more bristly and hard than normal brushes. For details this is great but for a wide flat area soft normal brushes are much better.



For The Greater Good

Taking painting commisions, PM or email me at 4m2armageddon@googlemail.com
For any requests. 
   
Made in us
Dakka Veteran




Everywhere I'm not supposed to be.

Now the real question on brushes: synthetic or natural hair for the bristles?

I use natural, the seem to hold more paint and I can usually get a smooth even tone without having to thin the paint (keyword: usually). However, synthetic bristles do seem to last a LOT longer...

If you need me, I'll be busy wiping the layers of dust off my dice. 
   
Made in us
Fresh-Faced New User




Re: paint sucking up the whole brush

If you are not already doing so be sure you get your brush wet before putting it in paint. I usually dip it, blot against a napkin lightly to suck out some of the water, then get paint. The top part of the bristle is then full of water and paint will diffuse up there much more slowly than it would wick into dry bristles.

Personally I buy brushes at art stores. They are much better than the GW ones at about the same price (seems like you can get brushes similar to GW for about 1/4th the price, which are fine for some purposes). So far my favorites are "windsor and newton gold sceptre II" #1 or #0 (can't remember which just now) detail brushes. Sometimes they come with comically long handles for such a tiny brush (it appears they match the handles to the display case rather than brush size, heh), but the trusty hobby knife soon fixes that.
   
Made in gb
Monstrously Massive Big Mutant






I can confirm that windsor and newton art equipment is good quality for reasonable prices. I use their brushes and flow improver at the moment.



For The Greater Good

Taking painting commisions, PM or email me at 4m2armageddon@googlemail.com
For any requests. 
   
Made in au
Swift Swooping Hawk




Canberra, Australia

Go to an art shop. A proper art shop. Buy some brush cleaner. I use this stuff after Im done painting and its magic. You can even leave this stuff on the brush's until you use them next time.

GW stuff is over priced and just bad. I don't even use their paints anymore. Your art shop is your best friend, go say hello.

For paints I buy Reaper and Vallejo. Brushs are from http://www.kolinskyartbrushes.com/home.php?cat=252.

Currently collecting and painting Eldar from W40k.  
   
Made in ie
Blood-Raging Khorne Berserker





I'm IRISH!

Ok.. was useful enough I guess?


DA:90-SG-M+B++I+Pw40k00-ID+++++A+/wWD149R---T(S)DM++
 
   
Made in gb
Fresh-Faced New User






A few paints fix all your details..........washes!!!!!Gryphonne sepia rocks, as does badab black, try them!

I'll post my a pic of my deathwing terminators which I painted by spraying them white and then giving tem a wash of....gryphone sepia!

On the subject of brushes, I tend to use some cheap ones I get from inexces..... they're 50P EACH!!!Not only that theywork just as wel a GW brush!

This message was edited 1 time. Last update was at 2010/03/16 16:54:11



Tyranids rule
 
   
Made in ca
Aspirant Tech-Adept





read this:
http://www.rosemaryandco.com/tipsandadvice-i-10.html



Automatically Appended Next Post:
Oh, and her brushes are awesome.

This message was edited 1 time. Last update was at 2010/03/16 17:14:35


 
   
 
Forum Index » Painting & Modeling Tutorials
Go to: