Switch Theme:

About folding tables.....  [RSS] Share on facebook Share on Twitter Submit to Reddit
»
Author Message
Advert


Forum adverts like this one are shown to any user who is not logged in. Join us by filling out a tiny 3 field form and you will get your own, free, dakka user account which gives a good range of benefits to you:
  • No adverts like this in the forums anymore.
  • Times and dates in your local timezone.
  • Full tracking of what you have read so you can skip to your first unread post, easily see what has changed since you last logged in, and easily see what is new at a glance.
  • Email notifications for threads you want to watch closely.
  • Being a part of the oldest wargaming community on the net.
If you are already a member then feel free to login now.




Made in us
Squishy Squig




Peru

Hi guys!

Its been a long time... I just need some help on this topic, I am looking for the perfect gamming table for my small apartment now, I have seen some plastic foldable tables that are perfect, but the only ones out there are 72" x 30" (loosing 18" on the short edge which is a lot!!) does anybody knows of a foldable plastic table that stands for the reglamentary 4' x 6' (48" x 72") for warhammer games or something close to it?

Please help me out!

Thanks
   
Made in us
Decrepit Dakkanaut






New Orleans, LA

I don't, but you could always get 3x 2'x4' sheets of plywood to set on top of that 72"x30" folding board.

That's what I put on my dining room table (plus a drop cloth to prevent scratching).

DA:70S+G+M+B++I++Pw40k08+D++A++/fWD-R+T(M)DM+
 
   
Made in us
40kenthus






Chicago, IL

You can make a 3 part folding table top out of pink foam. Glue 3 sheets of 1 inch pink foam & use duct tap to bind the edges and make the hinge. Its surprising strong and should do well for playing on - just don't lean on the edges hanging over the folding table.

Terrain, Modeling and More... Chicago Terrain Factory
 
   
Made in us
The Last Chancer Who Survived





Norristown, PA

I have 2 of these

http://www.walmart.com/ip/Mainstays-6-Foot-Long-Center-Fold-Table-White/13269097?findingMethod=rr

They're 2.5 deep, so you end up with more like 5x6 in the end, but it fits my ROB board real good, and I can use the extra room for dead/reserve models and stuff. They fold down to 3x2.5 and I just stick em in the back of a closet or under the bed when I'm not using em.

 
   
Made in us
Screaming Shining Spear





Central Coast, California USA

Unless your playing with a mat or other soft playing surface the 30x72 shouldn't be a problem. My friend has a 36x72 and uses 3 MDF boards that are 2'x4', and overhang isn't a problem. We just smaller side tables or TV trays to deploy our armies from and move our casualties to.

THE FUN HAS BEEN DOUBLED!!! 
   
Made in us
Insect-Infested Nurgle Chaos Lord





Oregon, USA

In have two tables, pushed together, that make a 6x4.5 table.

Each table is long and skinny. 6 ft x 2.25 ft

The Viletide: Daemons of Nurgle/Deathguard: 7400 pts
Disclples of the Dragon - Ad Mech - about 2000 pts
GSC - about 2000 Pts
Rhulic Mercs - um...many...
Circle Oroboros - 300 Pts or so
Menoth - 300+ pts
 
   
Made in us
Nurgle Chosen Marine on a Palanquin





You could get three of these, but you are better off moneywise getting two of the 6' tables.

http://www.walmart.com/ip/4-Foot-Folding-Table/7679248?findingMethod=rr

6' tables
http://www.walmart.com/ip/Mainstays-6-Foot-Long-Center-Fold-Table-White/13269097?findingMethod=rr

This message was edited 1 time. Last update was at 2012/03/01 23:04:09


 
   
Made in au
Anti-Armour Swiss Guard






Newcastle, OZ

kronk wrote:I don't, but you could always get 3x 2'x4' sheets of plywood to set on top of that 72"x30" folding board.

That's what I put on my dining room table (plus a drop cloth to prevent scratching).


This.
Although mine is 3 sheets of 15mm mdf instead of ply.

Although I do have a folding plastic blow moulded table (1800x750 which folds to 900x750) as well.

I'm OVER 50 (and so far over everyone's BS, too).
Old enough to know better, young enough to not give a ****.

That is not dead which can eternal lie ...

... and yet, with strange aeons, even death may die.
 
   
Made in us
Longtime Dakkanaut





I was able to get some 2'x4' plastic folding tables at wall mart for about $12.00 each. I just put them together 2 for Warmachine (4'x4') three for war hammer (4'x6').
   
Made in us
Brigadier General






Chicago

Necros wrote:I have 2 of these

http://www.walmart.com/ip/Mainstays-6-Foot-Long-Center-Fold-Table-White/13269097?findingMethod=rr

They're 2.5 deep, so you end up with more like 5x6 in the end, but it fits my ROB board real good, and I can use the extra room for dead/reserve models and stuff. They fold down to 3x2.5 and I just stick em in the back of a closet or under the bed when I'm not using em.


I think these are what my FLGS uses and they are great just like Necros says.

Two smaller tables are much easier to store in a closet than one big one.

This message was edited 1 time. Last update was at 2012/03/02 13:59:09


Chicago Skirmish Wargames club. Join us for some friendly, casual gaming in the Windy City.
http://chicagoskirmishwargames.com/blog/


My Project Log, mostly revolving around custom "Toybashed" terrain.
http://www.dakkadakka.com/dakkaforum/posts/list/651712.page

Visit the Chicago Valley Railroad!
https://chicagovalleyrailroad.blogspot.com 
   
Made in us
Fixture of Dakka





Steelcity

Its pretty difficult to find 4 foot wide tables... as they aren't functional for much except warhammer

Foam boards or wood planks overtop the tables fix the issues generally


Keeper of the DomBox
Warhammer Armies - Click to see galleries of fully painted armies
32,000, 19,000, Renegades - 10,000 , 7,500,  
   
Made in us
Decrepit Dakkanaut






New Orleans, LA

chromedog wrote:
kronk wrote:I don't, but you could always get 3x 2'x4' sheets of plywood to set on top of that 72"x30" folding board.

That's what I put on my dining room table (plus a drop cloth to prevent scratching).


This.
Although mine is 3 sheets of 15mm mdf instead of ply.


Doh! You're right. Mine is MDF, not plywood. 1/2", I think. Maybe 5/8"... I forget.

DA:70S+G+M+B++I++Pw40k08+D++A++/fWD-R+T(M)DM+
 
   
Made in us
Fresh-Faced New User




Whatever you're planning to use this table for sounds like fun. Are you searching for something a little more square? A lot of these folding tables are too long for what it sounds like you're wanting to do. I was looking through this site below. Couldn't imagine they wouldn't have something along what you're looking for. I think they even offer some kind of board game tables...

http://www.foldingchairsandtables.com
   
Made in cz
Speed Drybrushing




https://www.urbanmatz.com/p/237/6-x4-folding-table


   
Made in gb
[DCM]
Stonecold Gimster






I use one of these. Not sure if they're originally from the UK or Europe which probably doesn't help you. However they are 6'×4'.

https://www.incomgaming.co.uk/collections/gamemat/products/6-x-4-portable-gaming-table

My Painting Blog: http://gimgamgoo.com/
Currently most played: Silent Death, Xenos Rampant, Mars Code Aurora and Battletech.
I tried dabbling with 40k9/10 again and tried AoS3 - Nice models, naff games, but I'm enjoying HH2 and loving Battletech Classic and Alpha Strike. 
   
Made in us
[MOD]
Solahma






RVA

Probably best to start a new thread on this rather than continue one from 2013.

   
 
Forum Index » Dakka Discussions
Go to: