Help with files.

Forum adverts like this one are shown to any user who is not logged in. Join us by filling out a tiny 3 field form and you will get your own, free, dakka user account which gives a good range of benefits to you:

No adverts like this in the forums anymore.
Times and dates in your local timezone.
Full tracking of what you have read so you can skip to your first unread post, easily see what has changed since you last logged in, and easily see what is new at a glance.
Email notifications for threads you want to watch closely.
Being a part of the oldest wargaming community on the net.

If you are already a member then feel free to login now.

**hobojebus**

I've got some resin FW models in need of filing but i'm not sure what the right tool for the job is, do i just use any file set or do i need a more specific type for the job.

Any advice is welcome.

**mrhappyface**

I just use a craft knife for mold lines and file smooth what's left with an ordinary metal file/pin file.

**Scarper**

I'm sure you'll know already, but if you're new working with resin, be very careful of the dust. Resin dust that's thrown up by filing is very fine and particulate, and can cause major problems in your lungs. Make sure you're wearing a decent dust mask before you start!

As to tools themselves, I'm with the gent above

**Ouze**

I used to use files but I didn't like the finish they left behind. I also scrape lines with my snap-off hobby knife, it's way better control.

That being said, for larger vehicles and models, it won't do. I made myself some sanding sticks out of popsicle sticks and sandpaper - some 150 grit, some 220 grit.

And yes, wear a mask for any fine particulates, especially resin!

**hobojebus**

If only it was mold lines, its the large sections on the spartan treads I need to clean up.

I knew about the dust but thanks for the warning all.

**Ouze**

Well, files will work, but I definitely prefer to make some sanding sticks. You can use some pretty rough sandpaper for the worst spots. I just cut the sandpaper, use some elmer's glue to glue it to the popsicle sticks, and call it a day.