Author |
Message |
|
|
|
Advert
|
Forum adverts like this one are shown to any user who is not logged in. Join us by filling out a tiny 3 field form and you will get your own, free, dakka user account which gives a good range of benefits to you:
- No adverts like this in the forums anymore.
- Times and dates in your local timezone.
- Full tracking of what you have read so you can skip to your first unread post, easily see what has changed since you last logged in, and easily see what is new at a glance.
- Email notifications for threads you want to watch closely.
- Being a part of the oldest wargaming community on the net.
If you are already a member then feel free to login now. |
|
|
2019/10/19 00:25:35
Subject: Resurrecting an airbrush - soak in isopropynol?
|
|
[DCM]
Dankhold Troggoth
|
I need to resurrect an airbrush that apparently wasn't well cleaned before being put into storage . I've ordered a new needle and nozzle, but for the rest, should I soak it in isopropynol? Or do you soak yours in something else?
Thanks for any tips, I can't believe I did that!
|
|
|
|
2019/10/19 00:45:18
Subject: Resurrecting an airbrush - soak in isopropynol?
|
|
Regular Dakkanaut
Philadelphia, PA
|
Windex and a hydrosonic cleaner should sort it out, unless it has rusted.
|
|
|
|
2019/10/19 02:22:18
Subject: Resurrecting an airbrush - soak in isopropynol?
|
|
[DCM]
Dankhold Troggoth
|
Definitely no rust, as far as I can tell... just paint >.<
|
|
|
|
2019/10/21 01:04:19
Subject: Resurrecting an airbrush - soak in isopropynol?
|
|
Colonel
This Is Where the Fish Lives
|
Lacquer thinner will probably take care of any dried paint, but don’t soak the entire brush in it, just put some in the color cup and let it work.
Avoid putting it in an ultrasonic cleaner if you can, they can damage airbrushes.
|
d-usa wrote:"When the Internet sends its people, they're not sending their best. They're not sending you. They're not sending you. They're sending posters that have lots of problems, and they're bringing those problems with us. They're bringing strawmen. They're bringing spam. They're trolls. And some, I assume, are good people." |
|
|
|
2019/10/22 09:37:13
Subject: Resurrecting an airbrush - soak in isopropynol?
|
|
Blood Angel Terminator with Lightning Claws
|
Are you able to open up the brush?
You may need to replace orings after leaving it to soak
|
DV8 wrote:Blood Angels Furioso Dreadnought should also be double-fisted.
|
|
|
|
2019/10/24 09:28:35
Subject: Resurrecting an airbrush - soak in isopropynol?
|
|
Killer Khymerae
|
Depending upon your comfort level I'd completely disassemble the airbrush and remove any O-Rings and non-metallic parts. Which is a perfect reason why a lot of airbrushes are, well, crap. Way too much plastic, After disassembly, all metal parts go into either Lacquer Thinner or even Acetone (the real stuff. Not Nail Polish remover ). Reassemble. Shoot Lacquer Thinner through it and inspect the spray pattern(s) for any abnormalities. Any decent Airbrush can certainly be resurrected.
Also a real handy trick is to never store the airbrush with the needle fully seated. NEVER. Before using remove needle ( takes about 2 seconds to do ) apply a little "face oil" from your forehead or the side of your nose to the needle. Reinsert and it should be ready to go.
|
This message was edited 1 time. Last update was at 2019/10/24 09:32:03
|
|
|
|
|