Switch Theme:

Window Glass from UV Resin!  [RSS] Share on facebook Share on Twitter Submit to Reddit
»
Author Message
Advert


Forum adverts like this one are shown to any user who is not logged in. Join us by filling out a tiny 3 field form and you will get your own, free, dakka user account which gives a good range of benefits to you:
  • No adverts like this in the forums anymore.
  • Times and dates in your local timezone.
  • Full tracking of what you have read so you can skip to your first unread post, easily see what has changed since you last logged in, and easily see what is new at a glance.
  • Email notifications for threads you want to watch closely.
  • Being a part of the oldest wargaming community on the net.
If you are already a member then feel free to login now.




Made in au
[MOD]
Making Stuff






Under the couch

From the Comm Guild blog:


- by Iain Wilson



There are a few different options out there for filling in open windows on terrain. In the past, I've used clear plastic or aluminium mesh cut to shape and glued in. I recently picked up some Ultraviolet Resin intended for creating water effects, and it occurred to me that this might be a fun alternate way of adding panes to some windows.











The resin I'm working with is sold by Green Stuff World. It's a super-clear gel that you squeeze from the bottle and then set with a UV light, or by leaving it out in the sun. They also sell a UV torch, which I couldn't resist picking up.









To create a window pane, I took a painted door from the Maelstrom's Edge terrain sprue and laid it down on some aluminium foil, with a small piece of thin plasticard in behind to push the foil snug against the back of the window frame.



(I used a painted door as it was going to be impossible to paint the inside of the window frame once the resin was in place.)









I then added a drop of resin into the middle of the window, leaving it a minute or so to settle out to the edges of the frame. There were very few airbubbles in the resin, but I used a pin to gently poke the few that were there to make them go away.









To set the resin, I sat the UV torch on top of the doorframe pointing directly at the window, and left it for a couple of minutes to let it do its thing. From further experimentation later, the resin starts to cure within a few seconds, but I wanted to leave it long enough to make sure.









From there, the door was ready to be glued into a piece of terrain and detailed.



For coloured window glass, transparent paint gives a nice tint. This porthole was filled with resin in the centre, and then once set I painted the back of the resin with two coats of Tamiya Clear Orange.












To make your own windows of transparent doom, you can pick up the Maelstrom's Edge terrain sprues along with the rest of the Maelstrom's Edge range from the webstore here.







What are you working on? We would love to see your models and terrain in the Comm Guild Facebook group!




For other building ideas, modeling tutorials, army spotlights and conversion walkthroughs, check out the Hobby section of the Maelstrom's Edge website here.






 
   
Made in us
Longtime Dakkanaut






Impressive work as always. I have one question - once the clear resin is cured, do the resulting windows look evenly flat? Or do they bulge and slope in irregular ways? Are the results comparable to what you get from cutting and gluing in clear plastic?

Dakkadakka: Bringing wargamers together, one smile at a time.™ 
   
Made in au
[MOD]
Making Stuff






Under the couch

So long as you let the resin settle before curing it, the surface is even, although there is a little concavity where it grips around the edges. I didn't mind that look for these test pieces, but if you want the top perfectly flat the same trick that works for normal water effects resins should work - cure the first layer, then drop a small amount of resin in the middle of the concave area and let it settle out to the edges before curing.

 
   
Made in us
Ultramarine Chaplain with Hate to Spare






Oh that's genius! I have some bondic around, as well as some of those same door pieces. When I get serious about terrain again I might try this out.

And They Shall Not Fit Through Doors!!!

Tyranid Army Progress -- With Classic Warriors!:
https://www.dakkadakka.com/dakkaforum/posts/list/0/743240.page#9671598 
   
 
Forum Index » Painting & Modeling Tutorials
Go to: