http://www.dakkadakka.com/dakkaforum/posts/list/8.page JForum - http://www.jforum.net http://www.dakkadakka.com/dakkaforum/posts/preList/226883/513496.page http://www.dakkadakka.com/dakkaforum/posts/preList/226883/513496.page GMT
Not only does the glue 's surface area reaches the 2 contact point, it also reaches the whole length of the wires. there for adding extra bonding.

forgive my bad englsih btw]]> http://www.dakkadakka.com/dakkaforum/posts/preList/226883/513500.page http://www.dakkadakka.com/dakkaforum/posts/preList/226883/513500.page GMT http://www.dakkadakka.com/dakkaforum/posts/preList/226883/513590.page http://www.dakkadakka.com/dakkaforum/posts/preList/226883/513590.page GMT
Very helpful both of you.
]]> http://www.dakkadakka.com/dakkaforum/posts/preList/226883/514193.page http://www.dakkadakka.com/dakkaforum/posts/preList/226883/514193.page GMT
Just my opinion. I have buddies that metal pin but I got irritated quickly and tooth picks worked great!]]> http://www.dakkadakka.com/dakkaforum/posts/preList/226883/514624.page http://www.dakkadakka.com/dakkaforum/posts/preList/226883/514624.page GMT
The added strength is partly from the greater area of cement and partly from the physical support the pin gives to the joint, usually a limb or thin structure.]]> http://www.dakkadakka.com/dakkaforum/posts/preList/226883/514633.page http://www.dakkadakka.com/dakkaforum/posts/preList/226883/514633.page GMT ]]> http://www.dakkadakka.com/dakkaforum/posts/preList/226883/514773.page http://www.dakkadakka.com/dakkaforum/posts/preList/226883/514773.page GMT
If your pinned peices are still moving, it might be necessary to use a 2-part epoxy instead of superglue to provide a stronger bond with higher shear strength.

Also, your pin vice bit might be a tad big for the pin you're using - try a smaller bit or put a tad of greenstuff in the hole to act as filler. Make sure the surfaces are clean since this can cause the glue (or even epoxy) to have trouble sticking.

Lastly, use a hobby knife or file to roughen up the pin to give it some "tooth" for the glue.]]> http://www.dakkadakka.com/dakkaforum/posts/preList/226883/514880.page http://www.dakkadakka.com/dakkaforum/posts/preList/226883/514880.page GMT