http://www.dakkadakka.com/dakkaforum/posts/list/8.page JForum - http://www.jforum.net
I'm handicapped right out of the gate by the fact that I'm using the GW black bases that come with the kits. Not something that I thought about when I first started hobbying. I decided to try some black basalt (model train set stuff) on the bases, but it definately turned out really flat. I have a minimal budget, and a butt-load of models. . . Any suggestions on what I should use to finish the bases of my models?

(I've painted alot of my models as having a tinge of mud/dirt on thier boots, so the incorporation of dirt/dust elemets would be awesome!)

Cheers]]> http://www.dakkadakka.com/dakkaforum/posts/preList/482432/4869500.page http://www.dakkadakka.com/dakkaforum/posts/preList/482432/4869500.page GMT
Besides i like to work with plaster and pva glue to seal it but that's not very sturdy so not useful if you travel and play with your models.

Hmm besides that, cleap stuff can be plastic bits, small parts of wood etc etc. Really anything can be used to make a stunning looking base!]]> http://www.dakkadakka.com/dakkaforum/posts/preList/482432/4869592.page http://www.dakkadakka.com/dakkaforum/posts/preList/482432/4869592.page GMT
Oh man, I need to try this! Thank you very much for the brain-storm!

Also, your signature makes me contemplate suicide. . . hahahahaha!]]> http://www.dakkadakka.com/dakkaforum/posts/preList/482432/4869749.page http://www.dakkadakka.com/dakkaforum/posts/preList/482432/4869749.page GMT
The paintjob is what will really tie your bases together with the army, though. If you already have mud and/or dust on your models, make sure your colors make sense. They needn't necessarily be identical, depending on the situation (e.g. wet mud tends to appear darker than the soil it contains, when dry), but grey-brown soil and red-brown crud on boots won't make much sense.

There are a number of great mud base tutorials out there (I'm a big fan of DoubleT's, which can be seen in his "Muddy Times" plog on Dakka), if you want to take it to the extreme. Otherwise, PVA glue, fine sand, a bit of grit for variety, and perhaps some gloss varnish to establish wetter spots is all you'll need, aside from paint you already have (since you put it on their boots).]]> http://www.dakkadakka.com/dakkaforum/posts/preList/482432/4869776.page http://www.dakkadakka.com/dakkaforum/posts/preList/482432/4869776.page GMT http://www.dakkadakka.com/dakkaforum/posts/preList/482432/4870506.page http://www.dakkadakka.com/dakkaforum/posts/preList/482432/4870506.page GMT 40k armies. Like, guard are holding a planet and its a mess of trenches and foxholes, CSM are churning it up and turning it into hell. SM are dropped into fights the IG can't finish and nids are actually changing the biological landscape.

I tend to pva, sand then use thin chaos black then work up to space wolves gray through adeptus, fortress and codex. Finally I give it a brush of boltgun to make it shine. The end result kinda looks like the igneous rock in granite.]]> http://www.dakkadakka.com/dakkaforum/posts/preList/482432/4870672.page http://www.dakkadakka.com/dakkaforum/posts/preList/482432/4870672.page GMT
The models below also have a couple of resin bits, but the core recipe is really straightforward.

You need:
Dark brown paint
Light brown paint
Dark brown wash/ink.
White glue (Elmer's/PVA)
A cheapass brush (like for kids' waterpaints)
A drybrush (old, beat-up regular minis paintbrush)
A small plastic tub of sand, with a mixed grit/size. Natural sand from outdoors can work fine.
A small plastic tub of static grass (green or yellow).
A disposable plastic mixing container (I actually use and re-use old blisters; and I've been using the same two blisters for years).

Paint the bases dark brown. Allow to dry.

Mix some white glue and some tap water in your mixing container, and paint it on top of the base using the cheapass watercolor brush. You just want enough water to let the glue flow around easily/smoothly and coat the top of the base. If you slop some over the side of the base, wipe it off with your thumb and dry that on a paper towel.

Dip the base in the tub of sand, letting the top get coated, then turn it sideways and pour the excess sand back in the tub. Tap the bottom of the base a couple of times. Wipe the edges if you have extra sand sticking to the side because you missed wiping off slopped glue. Allow to dry.

Once the bases are completely dry, coat the sand with the brown wash/ink, darkening all the sand. Use the drybrush to spread it as needed. Allow to dry.

Once the bases are dry again, drybrush the sand the light brown, to give it contrast and visible texture from table-height view.

In the course of inking and drybrushing, you will have messed up the edges of the bases a bit. Clean them up with another smooth layer of the dark brown paint.

Take the watered-down white glue again, and using the cheapass brush, paint it in one or two spots on the base, then hold the mini over/in the tub with the static grass, and just throw a little bit of the static grass on the glued spots, covering the white completely. Turn the model sideways/upside-down (in/over the grass container!) to dump off the excess, and again tap the bottom of the base to help get rid of loose material and make the stuff that sticks stand up a bit.

Done!




]]> http://www.dakkadakka.com/dakkaforum/posts/preList/482432/4870741.page http://www.dakkadakka.com/dakkaforum/posts/preList/482432/4870741.page GMT