http://www.dakkadakka.com/dakkaforum/posts/list/8.page JForum - http://www.jforum.net http://www.dakkadakka.com/dakkaforum/posts/preList/569845/6371892.page http://www.dakkadakka.com/dakkaforum/posts/preList/569845/6371892.page GMT http://www.dakkadakka.com/dakkaforum/posts/preList/569845/6371908.page http://www.dakkadakka.com/dakkaforum/posts/preList/569845/6371908.page GMT
Anyway, don't pull apart things that were plastic glued.]]> http://www.dakkadakka.com/dakkaforum/posts/preList/569845/6372362.page http://www.dakkadakka.com/dakkaforum/posts/preList/569845/6372362.page GMT http://www.dakkadakka.com/dakkaforum/posts/preList/569845/6372371.page http://www.dakkadakka.com/dakkaforum/posts/preList/569845/6372371.page GMT
As Krucho said, it's better to deliberately cut or saw the pices apart. That way there are no nasty surprises.

Then you will have to rework the parts so they fit together again in the pose you want. To do the same for a wraithknight, I've used beheaded, 2mm diameter nails as pins.]]> http://www.dakkadakka.com/dakkaforum/posts/preList/569845/6372619.page http://www.dakkadakka.com/dakkaforum/posts/preList/569845/6372619.page GMT
For reattaching the pieces, I would be tempted to use plastic rod as the "pin" because it is so easy to cement with liquid plastic weld. Metal is stronger though you need to epoxy resin to hold it. The best choice will depend on the weight and structural importance of the parts to be joined.

Modelling putty -- not Green Stuff but the stuff a bit like toothpaste that Tamiya and Squadron sell -- is great for covering gaps and holes. A light grade fingernail art stick is useful for sanding down the rough seams.

]]> http://www.dakkadakka.com/dakkaforum/posts/preList/569845/6372718.page http://www.dakkadakka.com/dakkaforum/posts/preList/569845/6372718.page GMT http://www.dakkadakka.com/dakkaforum/posts/preList/569845/6372741.page http://www.dakkadakka.com/dakkaforum/posts/preList/569845/6372741.page GMT GW glue putting the model in 99% rubbing alcohol will dissolve the glue. If you used anything else you will want to use a hobby saw / razor saw and sharp hobby knife to cut it apart.

Its also a good idea to have some platicard and green stuff on hand to replicate details that you had to mangle when chopping it up. I did this with 2 wraith lords i got used for very cheap. There may be compromises in the pose based on what you can cut or replicate. I would be less inclined to do it with brand new riptides.]]> http://www.dakkadakka.com/dakkaforum/posts/preList/569845/6374466.page http://www.dakkadakka.com/dakkaforum/posts/preList/569845/6374466.page GMT