<![CDATA[Latest posts for the thread "Building the Warlord titan"]]> http://www.dakkadakka.com/dakkaforum/posts/list/8.page JForum - http://www.jforum.net Building the Warlord titan
I've been working on this model for a friend for some time and have a video series of it. If there's any interest I'll post more of the photos and videos. Happy to answer any questions, too! I've had to buy a few new tools and get comfortable doing a few new things but it's basically simply a bigger model of the type we're used to

So here's how the kit started - a big box in the trunk of my buddy's car:



He picked it up from the Forge World shop at Warhammer World in Nottingham, England.

Here's the unboxing video I did for the main body - it comes in two massive red boxes, if you haven't seen one of these boxes they're nearly 2 feet long and about a foot wide!




And because he bought all the available weapons, here's a separate video just for those!




There's several more videos in the playlist but don't want to spam the thread with loads of videos (unless you're interested!). I can also post pictures, up-close stuff, detail how I assembled the legs and torso, etc. ]]> http://www.dakkadakka.com/dakkaforum/posts/preList/748640/9785538.page http://www.dakkadakka.com/dakkaforum/posts/preList/748640/9785538.page GMT Building the Warlord titan And yeah... damn, that's an insane project that requires a lot of tools and know-how apparently!

I'm personally interested in seeing what it'll look like assembled completely! ]]> http://www.dakkadakka.com/dakkaforum/posts/preList/748640/9786055.page http://www.dakkadakka.com/dakkaforum/posts/preList/748640/9786055.page GMT Re:Building the Warlord titan but I did the various steps in case anyone else comes along and wants to build this thing. And I get better at the videos the more I go, I think

So here's the 'boring bits'







and the first build step was the legs...which did not go well.





The epoxy I used was too slow (chose the 20-minute epoxy for some reason) so a slow, sticky mess ensued! Gah. Thick CA glue did the trick though. All the various angles to deal with made it difficult...




]]> http://www.dakkadakka.com/dakkaforum/posts/preList/748640/9786367.page http://www.dakkadakka.com/dakkaforum/posts/preList/748640/9786367.page GMT Building the Warlord titan http://www.dakkadakka.com/dakkaforum/posts/preList/748640/9787119.page http://www.dakkadakka.com/dakkaforum/posts/preList/748640/9787119.page GMT Building the Warlord titan Expensive, time consuming and can't even use it often in game but oh so awesome looking!]]> http://www.dakkadakka.com/dakkaforum/posts/preList/748640/9787121.page http://www.dakkadakka.com/dakkaforum/posts/preList/748640/9787121.page GMT Building the Warlord titan It's like a chicken had sex with an AT-ST from Star Wars!

And yeah but my friend isn't going to use this very often, this was a birthday present to himself, it will mostly be a display piece. I think it'll hit a table 2-3 times a year at most, between that it'll sit in a corner and look awesome.

BTW, he's going for the Legio Astorum color scheme, dark blue with flames coming up the legs. They're also called the Warp Runners, which sounds cooler to me. He doesn't want flames up the legs though, he's got an idea that should work out really really well.

I'll post the other videos I've done up to now later, it's fully built now! I'll be getting the first proper bits of paint on this beast real soon! ]]> http://www.dakkadakka.com/dakkaforum/posts/preList/748640/9787221.page http://www.dakkadakka.com/dakkaforum/posts/preList/748640/9787221.page GMT Building the Warlord titan Is your friend paying you for this gigantic project? ]]> http://www.dakkadakka.com/dakkaforum/posts/preList/748640/9787812.page http://www.dakkadakka.com/dakkaforum/posts/preList/748640/9787812.page GMT Building the Warlord titan

Automatically Appended Next Post:
Had Warp Runners in Epic in the days of 1st edition, loved the scheme]]> http://www.dakkadakka.com/dakkaforum/posts/preList/748640/9787877.page http://www.dakkadakka.com/dakkaforum/posts/preList/748640/9787877.page GMT Building the Warlord titan

Reminds me of Legio Victorium except flames in addition.

Hopefully we'll eventually see pictures of it painted!

BTW so if I understood right you'll put torso permanently into the legs? Not any very strong magnets or something to allow transporting in 2 parts(what I'm planning to try on the much smaller warhound)? Permanent attachment? Presumably to ensure torso doesn't fall off or something? And this will be done pre-painting? Just wondering how much of this one would go painting in separate parts. Not sure how I would go around painting 22" tall model in one piece! Probably would need to create some sort of painting box just for this model as usual way of airbrushing by holding part by hand on somewhere I'm not planning probably wouldn't work on this big and heavy model!]]> http://www.dakkadakka.com/dakkaforum/posts/preList/748640/9787903.page http://www.dakkadakka.com/dakkaforum/posts/preList/748640/9787903.page GMT Building the Warlord titan
Squerkie wrote:Just curious Is your friend paying you for this gigantic project?

Oh yes! Basically in other Forge World models, but yeah he's paying me.
tneva82 wrote:Hopefully we'll eventually see pictures of it painted!

BTW so if I understood right you'll put torso permanently into the legs? Not any very strong magnets or something to allow transporting in 2 parts(what I'm planning to try on the much smaller warhound)? Permanent attachment? Presumably to ensure torso doesn't fall off or something? And this will be done pre-painting? Just wondering how much of this one would go painting in separate parts. Not sure how I would go around painting 22" tall model in one piece! Probably would need to create some sort of painting box just for this model as usual way of airbrushing by holding part by hand on somewhere I'm not planning probably wouldn't work on this big and heavy model!

Painting will be starting really soon!

And yeah the torso will be permanently attached. If it were my model I'd try very hard to have it pretty poseable, but it's not my model and my friend is more of a gamer than I am, so he doesn't want a massive action figure on the table, he wants a model that will stay in one piece. So the torso is getting bolted to the hips from inside (the torso is pretty hollow). Once the main parts of the body skeleton are assembled it and the weapons will just get spray painted outside and the smaller parts (if you can call an armor plate larger than many tanks "small") will be airbrushed inside.


After building the legs, the next big step was making the base. This took a bit of back and forth with the model's owner to get the right size and make it big enough for adding some detail to - but not too much. No stomped Rhinos or Sicarans here! The first thing was to figure out how to make an oval of the right size, cut it out and get the legs mounted.




With the legs mounted, the rest of the body could be built and attached (3 thick wood screws into the hips). Lots of thick, gel type CA glue and more wood screws to hold the shoulders in place. Plus I had to figure out how to attach the weapons, which are shown in the next video.




While things were drying, the weapons got assembled - not a huge amount to show, but some significant gaps had to be filled in with putty.




This is the most recent video, the next ones will show it at least partially painted! ]]> http://www.dakkadakka.com/dakkaforum/posts/preList/748640/9789038.page http://www.dakkadakka.com/dakkaforum/posts/preList/748640/9789038.page GMT Building the Warlord titan
 krushgroove wrote:
And yeah the torso will be permanently attached. If it were my model I'd try very hard to have it pretty poseable, but it's not my model and my friend is more of a gamer than I am, so he doesn't want a massive action figure on the table, he wants a model that will stay in one piece. So the torso is getting bolted to the hips from inside (the torso is pretty hollow). Once the main parts of the body skeleton are assembled it and the weapons will just get spray painted outside and the smaller parts (if you can call an armor plate larger than many tanks "small") will be airbrushed inside.


I'm less interested on posability(I glue vehicle doors generally) and more of transportability. I figure separate legs(plus base) and torso would be better for transporting the damn thing than everything glued up permanently if there was going to be apoc game I would like to bring it.

Was going to ask about weapon attachment/swappability but guess that's next part

BTW in terms of time how long assembling legs and torso took you?]]> http://www.dakkadakka.com/dakkaforum/posts/preList/748640/9789482.page http://www.dakkadakka.com/dakkaforum/posts/preList/748640/9789482.page GMT Building the Warlord titan
As for transport, it's up to you - I've been talking with a guy building his Warlord and he's magnetized all the armor plates for easier transport. I don't see how that will make it easier, but to each their own! With the weapons removed from the torso, yes it will be easier to transport with the torso and legs/base in 2 parts, but my friend is also concerned about making absolutely sure a 10-kilo block of expensive painted resin doesn't drop onto his models while he's trying to move the model on a gaming table

As for the time it took to assemble...not counting washing and clean-up of mold lines and casting gates, the legs took about an evening, the torso took a bit longer because of the screwing and drilling I felt was needed. ]]> http://www.dakkadakka.com/dakkaforum/posts/preList/748640/9790370.page http://www.dakkadakka.com/dakkaforum/posts/preList/748640/9790370.page GMT Building the Warlord titan
 krushgroove wrote:
About halfway through part 7 I go into how the weapons will attach to the arms, and there's a bit more about that in part 8.

As for transport, it's up to you - I've been talking with a guy building his Warlord and he's magnetized all the armor plates for easier transport. I don't see how that will make it easier, but to each their own! With the weapons removed from the torso, yes it will be easier to transport with the torso and legs/base in 2 parts, but my friend is also concerned about making absolutely sure a 10-kilo block of expensive painted resin doesn't drop onto his models while he's trying to move the model on a gaming table

As for the time it took to assemble...not counting washing and clean-up of mold lines and casting gates, the legs took about an evening, the torso took a bit longer because of the screwing and drilling I felt was needed.


Armour plates yeah I think I would put them on hull. However torso and legs I think would make easier to find box big enough and in 2 boxes lighter to carry reducing chance of mistake. I can however see why moving model might be worry but I thought with the hole+slab+2 as strong magnets as I can fit there should make sure that the heavy torso doesn't accidentally flip over. However obviously I have no experience Maybe try that and if not working just glue them magnets and all together for good.

Surprisingly quick actually. With all those parts I expected bit more than that.]]> http://www.dakkadakka.com/dakkaforum/posts/preList/748640/9790877.page http://www.dakkadakka.com/dakkaforum/posts/preList/748640/9790877.page GMT Re:Building the Warlord titan
in order as it would appear on the model


The lower leg armor plates, with the sunset on the bottom fading up to a blue

The sunset will be much shorter, with proportionally more light blue and light yellow and less red

the upper plates will go from dark blue to super dark blue

the top plates on the shoulders will have a galaxy and starfield like the Milky Way]]> http://www.dakkadakka.com/dakkaforum/posts/preList/748640/9804694.page http://www.dakkadakka.com/dakkaforum/posts/preList/748640/9804694.page GMT Re:Building the Warlord titan


And fixing up the lower leg supports before starting the shading on the skeleton

]]> http://www.dakkadakka.com/dakkaforum/posts/preList/748640/9831930.page http://www.dakkadakka.com/dakkaforum/posts/preList/748640/9831930.page GMT