http://www.dakkadakka.com/dakkaforum/posts/list/8.page JForum - http://www.jforum.net
This is what I have so far





So far I have primed then red airbrush coated the sides which the next step would be to clear coat which helps put a nice finish on the red then an oil based wash. However I am concerned with the large flat surface areas the oil wash alone may not give adequate weathering appearance for a chaos vehicle. And I don’t think using black wash before clear coat would look quite right either?

Next thing is I was going to keep the top panel black. Paint silver wash it then clear coat then wash again and rehighlight and work metals basically same as above. But I’m thinking maybe I should add some scratches and armor damage to break up the solid black ?

Does anyone have a good tutorial video or website that covers these topics please?]]> http://www.dakkadakka.com/dakkaforum/posts/preList/788337/10796824.page http://www.dakkadakka.com/dakkaforum/posts/preList/788337/10796824.page GMT Here's a handy tutorial!

You can also drybrush brown or black into the creases to help dirty things up a bit more. ]]> http://www.dakkadakka.com/dakkaforum/posts/preList/788337/10796838.page http://www.dakkadakka.com/dakkaforum/posts/preList/788337/10796838.page GMT
Scratches can be done whit the smalles brush you have plus in this case a metal colour. no need for steady hands, cuz damage aint perfeckt.
Then i would grab a dark brown and as insaniak said, lightly apply it on a bit of sponge and lightly dab the model with it. For futher effect, you can use various shades of brown oil paint and do streaks/ add deapth to the metal scratches.

2 things to keep in mind: a; apply a clearcoat before each stage, else you will ruin the paintjob. oilpaint use thinner and thinner just rubs of the paint very easily. b: it is very easy to overdo it if you use more then 1 style of weathering to the point where it looks just wrong.

https://www.youtube.com/watch?v=aNBeRdi_cf8
]]> http://www.dakkadakka.com/dakkaforum/posts/preList/788337/10797041.page http://www.dakkadakka.com/dakkaforum/posts/preList/788337/10797041.page GMT
Scrape up some pencil graphite and rub it around surfaces that need wear (hatches, access ramps, ladders etc) using your fingertip.

Weathering powders. In the track sections, and around the bottom for dirt. You could use soot powders around exhausts also. ]]> http://www.dakkadakka.com/dakkaforum/posts/preList/788337/10797084.page http://www.dakkadakka.com/dakkaforum/posts/preList/788337/10797084.page GMT http://www.dakkadakka.com/dakkaforum/posts/preList/788337/10797148.page http://www.dakkadakka.com/dakkaforum/posts/preList/788337/10797148.page GMT