Switch Theme:

Share on facebook Share on Twitter Submit to Reddit  [RSS] 

Watcorp Designs - WOESTALKERS Kickstarter coming FEB! @ 2019/08/29 11:50:57


Post by: Kinetochore


Hi All,

Sorry to interrupt the news on new Space Elves, Emos and Nuns with guns but I just want to announce the latest Kickstarter from Watcorp Designs

Following on from the successful Modurail Kickstater I've created Modutruck - STL files for a range of inter-changable, customisable Civilian and armoured trucks for use in Sci-fi and Post-Apocalyptic wargames

https://www.kickstarter.com/projects/watcorpdesigns/modutruck-3d-printable-trucks?ref=dt3gkc

Different cab sections and rear parts can be combined with accessories like plows, ram bars etc to create a huge variety of vehicles with more to be added as stretch goals

All parts can be printed without supports on a standard FDM 3d printer or can be printed on a resin printer for higher quality (hollow versions available to reduce resin use)

100% FUNDED IN 7HRS - FIRST STRETCH GOAL UNLOCKED!!!

This is my second Kickstarter (first delivered to a good reponse, on-time and in full) I also have 100% positive feed back on both my Ebay and ETSY stores where I have been designing and selling 3d prints for a few years.


Project officially launches tomorrow so watch this space for more info

Please take a look - comments and requests welcome!

Cheers

James


[Thumb - wip 2.JPG]
[Thumb - modutruck promo.JPG]


Watcorp Designs - WOESTALKERS Kickstarter coming FEB! @ 2019/08/29 12:34:37


Post by: Skinnereal


Looks good.

I am sure I cannot see a Taurox there. Nope, totally not there
I'll be dropping by when it is live.


Watcorp Designs - WOESTALKERS Kickstarter coming FEB! @ 2019/08/29 13:18:19


Post by: Kinetochore


Cheers.

Lets just say the basic design is sympathetic to the setting..... ;-)


Watcorp Designs - WOESTALKERS Kickstarter coming FEB! @ 2019/08/30 00:11:50


Post by: kestral


Those are nice trucks. Someday I'll have a 3-D printer, but until then there are just too many layers of aggravation in these "kickstarters for files" for me, which is a shame. Will they be on Shapeways?


Watcorp Designs - WOESTALKERS Kickstarter coming FEB! @ 2019/08/30 06:50:43


Post by: Kinetochore


I can understand its annoying if you don't have a 3D printer. Problem with Shapeways is that they are really expensive for the customer whilst paying a tiny amount to supplier of files.

I might add if there is sufficient demand though.

My longer term plan if I get funding from this KS is to invest in more casting equipment so I can do high quality resin casts of these eventually.


Watcorp Designs - WOESTALKERS Kickstarter coming FEB! @ 2019/08/30 06:50:59


Post by: Samko


The link doesn't seem to work for me.


Watcorp Designs - WOESTALKERS Kickstarter coming FEB! @ 2019/08/30 08:06:54


Post by: Skinnereal


Woot!
First backer


Watcorp Designs - WOESTALKERS Kickstarter coming FEB! @ 2019/08/30 08:28:37


Post by: Kinetochore


Awesome stuff cheers for backing :-)

I've added link to first post again in case there is an issue with it


Watcorp Designs - WOESTALKERS Kickstarter coming FEB! @ 2019/08/30 08:52:28


Post by: rhavien


Backed! Nice one.


Watcorp Designs - WOESTALKERS Kickstarter coming FEB! @ 2019/08/30 10:59:39


Post by: Kinetochore


Great stuff! 50% funded already :-)


Watcorp Designs - WOESTALKERS Kickstarter coming FEB! @ 2019/08/30 23:14:24


Post by: Kinetochore


187% funded and first 3 stretch goals unlocked day 1! Awesome stuff.

Going to be weekend of working on painting up examples and building post apocalyptic trucks:-)


Watcorp Designs - WOESTALKERS Kickstarter coming FEB! @ 2019/09/01 13:48:36


Post by: Kinetochore


First files for the Post Apocalyptic accessories done - more to come soon.

I'm open to other requests for additions!

Cheers

[Thumb - promo 2.JPG]


Watcorp Designs - WOESTALKERS Kickstarter coming FEB! @ 2019/09/01 19:10:18


Post by: Ketara


I like your work. Great stuff!


Watcorp Designs - WOESTALKERS Kickstarter coming FEB! @ 2019/09/01 19:29:12


Post by: Kid_Kyoto


If you're taking requests some that come to mind are a crane, a jerry-rigged gun truck/technical, and some sort of cage truck.


Watcorp Designs - WOESTALKERS Kickstarter coming FEB! @ 2019/09/01 21:08:24


Post by: Kinetochore


Cheers for suggestions

Technical is one of the stretch goals that is unlocked and I should have models to show soon.

Tow truck is already one of the designs - if the articulated lorry is unlocked a proper crane is possible. Will be doing wrecking balls and buzz saw option for tow truck too.

Cage truck should be possible to - will have to come back to that once I've done finished the details on the stretch goals.

Here's some WIP of the tow truck - excuse the paint job for now!

[Thumb - 20190901_220328.jpg]
[Thumb - 20190901_220342.jpg]
[Thumb - 20190901_220346.jpg]


Watcorp Designs - WOESTALKERS Kickstarter coming FEB! @ 2019/09/03 07:46:56


Post by: Kinetochore



Another Update

Design for the Comms truck is complete

Whilst I was there I couldn't resist doing another bonus model - the Enforcer MK1 Patrol Car - for all your neighborhood policing needs

Link here
www.kickstarter.com/projects/watcorpdesigns/modutruck-3d-printable-trucks


[Thumb - comms truck promo.PNG]
[Thumb - ENFORCER PROMO.PNG]


Watcorp Designs - WOESTALKERS Kickstarter coming FEB! @ 2019/09/09 19:15:29


Post by: Kinetochore


Hi All,

Just some more examples of whats possible with the printed files - more in 1st post.

Check out the Kickstarter for more info.

Any questions or requests let me know!



Watcorp Designs - WOESTALKERS Kickstarter coming FEB! @ 2019/09/17 16:39:13


Post by: Kinetochore


Hi All,

Quick update on progress of this kickstarter - added an extra stretch goal at £900. A cargo hauler compatible with the Munitorum shipping crates. A 3d printable crate the same size will also feature in kickstarter.

Preview of WIP half-track with turret below also.

For more info please take a look at the kick starter here https://www.kickstarter.com/projects/watcorpdesigns/modutruck-3d-printable-trucks?ref=dt3gkc


[Thumb - htt 1.JPG]
[Thumb - cargo hauler 1.JPG]
[Thumb - hauler 2.JPG]


Watcorp Designs - WOESTALKERS Kickstarter coming FEB! @ 2019/09/18 07:58:04


Post by: Skinnereal


I got some of those crates for LOS-blocking.
Having it on a truck is so much better


Watcorp Designs - WOESTALKERS Kickstarter coming FEB! @ 2019/09/19 22:00:47


Post by: Kinetochore


Glad you like idea - Hopefully the articulated lorry cab and trailer goal will be reached for some even bigger bits!


Watcorp Designs - WOESTALKERS Kickstarter coming FEB! @ 2019/09/25 10:23:01


Post by: Kinetochore


Only 11 days to go!

Katyusha design finished - just working on the assembled example.

Also added a little extra to the included files - Monster Truck Wheels!

https://www.kickstarter.com/projects/watcorpdesigns/modutruck-3d-printable-trucks?ref=dt3gkc

[Thumb - mons1.JPG]
[Thumb - 20190922_074129.jpg]
[Thumb - katyusha.jpg]


Watcorp Designs - WOESTALKERS Kickstarter coming FEB! @ 2019/09/30 10:12:14


Post by: Kinetochore


Last 6 days to back this Kickstarter!



https://www.kickstarter.com/projects/watcorpdesigns/modutruck-3d-printable-trucks?ref=dt3gkc

[Thumb - modutruck promo.JPG]
[Thumb - warrig 2.JPG]


Watcorp Designs - WOESTALKERS Kickstarter coming FEB! @ 2019/10/05 17:25:53


Post by: Kinetochore


Last 20hrs left on this Kickstarter.

Gas lands scale compatible

Articulated lorry unlocked
Anti air gun unlocked.
Any tank gun unlocked
Only £300 to rolling fortress upgrade!

[Thumb - FB_IMG_1570296181695.jpg]


Watcorp Designs - WOESTALKERS Kickstarter coming FEB! @ 2019/10/08 17:17:12


Post by: Kinetochore


I'll call that a win - All stretch goals unlocked!

Just need to finalise the designs of the last few stretch goals and arrange files on Google drive :-)

Massive thanks to everyone who supported


Watcorp Designs - WOESTALKERS Kickstarter coming FEB! @ 2019/10/08 22:31:37


Post by: Flinty


Congratulations. Looks like a good mix of stuff.


Watcorp Designs - WOESTALKERS Kickstarter coming FEB! @ 2019/12/09 20:37:44


Post by: Kid_Kyoto


If there's no objections I'm going to make this a general Watcorp thread, they have a small but very useful and reasonably priced line of terrain that's worth noting.

Facebook
https://www.facebook.com/WatcorpDesigns/

UK Ebay shop
https://www.ebay.co.uk/str/watcorpdesigns

US Ebay shop
https://www.ebay.com/str/WatcorpDesigns?_trksid=p2047675.l2563

For me this set looks really useful, grimdark fortress walls at ~$10 a set. They could fit into all sorts of projects.


There's tons of other walkways, staircases, barrier and other bits to check out.


Watcorp Designs - WOESTALKERS Kickstarter coming FEB! @ 2019/12/10 22:19:16


Post by: Kinetochore


Cheers Kyoto,

Thanks for looking at my stuff,

Apparently my 67mm height platform supports and steps were such a good idea GW pinched them for the Zone Mortalis terrain.....

Been alot of focus on the the 3d printed files the last few months but hopefully willl be able to transition more product over to resin casts for better availability and more weapons and accessories in the 1st half of next year. As always I'm open to requests!






Watcorp Designs - WOESTALKERS Kickstarter coming FEB! @ 2019/12/14 04:08:09


Post by: kestral


I'd love to be able to get the trucks through your e-bay store!


Watcorp Designs - WOESTALKERS Kickstarter coming FEB! @ 2019/12/24 14:16:20


Post by: Kinetochore


Thanks, I'm working on some resin molds of the cabs and rears so I can speed up the manufacturing process and make them cost effective to sell as finished models.

Once I have that sorted I can put on store.


Automatically Appended Next Post:
Howdy All,

Would just like announce the new website has gone live. www.watcorpdesigns.com

This will allow better communication between us and the community, as well as giving more flexibility in how we deliver products.

For instance the complete file sets for the Modutruck and Modurail kick starters are now available for the first time here.

I'm in the process of transitioning all the products from the ebay and ETSY store over to this new site so keep an eye out for more stuff!


www.watcorpdesigns.com

Cheers

James


Watcorp Designs - WOESTALKERS Kickstarter coming FEB! @ 2019/12/31 13:52:13


Post by: Kinetochore


Added some more bulkhead styles to the store

They are all resin cast 72mm x 72mm sections and are designed to be a cheap way of adding detail to gaming boards where you don't need/want expensive double sided pieces of plastic terrain.

Plenty more good stuff coming in next few months

https://www.ebay.co.uk/itm/113940787867
www.watcorpdesigns.com

[Thumb - 20191230_202416.jpg]
[Thumb - s-l1600.jpg]
[Thumb - 20191230_202455.jpg]


Watcorp Designs - WOESTALKERS Kickstarter coming FEB! @ 2019/12/31 14:06:18


Post by: Crablezworth


 Kinetochore wrote:
Thanks, I'm working on some resin molds of the cabs and rears so I can speed up the manufacturing process and make them cost effective to sell as finished models.

Once I have that sorted I can put on store.






Stoked to see that the modutrucks will be available in the store, so many cool designs, can't wait


Watcorp Designs - WOESTALKERS Kickstarter coming FEB! @ 2020/01/07 11:38:43


Post by: Kinetochore


Cheers,

Working on the moulds as we speak. So far planning on the armoured cab and the tanker and hauler rears for wave 1 release. The majority of the accessories will remain 3d printed and will be out at the same time.


Watcorp Designs - WOESTALKERS Kickstarter coming FEB! @ 2020/01/07 11:47:20


Post by: Kinetochore


In addition to the physical release of Modutruck I'm looking to release a terrain kickstarter that I've been working on in the background for a lot of last year.

This project differs from other 3d printed terrain kickstarters in that it is designed to allow assembly and disassembly. This allows potentially 1,000s of different setups using relatively few printed parts and is a lot easier for storage rather than having to find somewhere for complete buildings.

Project is due to launch on the 29th of Feb so I'm still open to comments, requests and ideas for more files.

Currently I have large numbers of walls, pillars, roofs, pipework, silos, walkways, gantries designed and tested with cranes, opening doors, weapons and more on the cards.

Check out the website for more info (www.watcorpdesigns.com) or follow on kickstarter (https://tinyurl.com/wepvw53)



[Thumb - PROMO 2.JPG]
[Thumb - hook n play exp.JPG]
[Thumb - 20200106_233354.jpg]
[Thumb - 20200106_233503.jpg]
[Thumb - 20200106_145510.jpg]
 Filename modufab2.mp4 [Disk] Download
 Description
 File size 34816 Kbytes



Watcorp Designs - WOESTALKERS Kickstarter coming FEB! @ 2020/01/07 17:07:54


Post by: Kid_Kyoto


If you're looking for ideas, I was thinking about guard towers. Either 1 man type or something large enough for a full squad.







Watcorp Designs - WOESTALKERS Kickstarter coming FEB! @ 2020/01/08 07:39:52


Post by: Kinetochore


Hi Kyoto,

Good idea - I can do some standalone mini "observation" type towers for 1-2 models.

I think the full squad size towers should be doable with the standard size designs. Will look to add some alternative "leg" type supports and alternative wall pieces possibly.

That hexagonal tower is a cool design...


I'll also add some scale shots with the Dark Uprising and Sector Mech terrain soon

Cheers


Watcorp Designs - WOESTALKERS Kickstarter coming FEB! @ 2020/01/10 09:16:12


Post by: Kinetochore


Quick update on Modu-fab,

Someone over on the Necromunda forum was asking about scale vs other terrain.

The wall sections are 72x72 (same as original Necromunda bulheads) They are slightly higher than the Zone Mortalis sections but close enough to look like a step. Height is the same as the GW Plasma coil terrain. At 2nd level there is a greater difference between Modu-fab and Zone Mortalis/Sector Mechanicus. Interestingly this is the exact same distance as a single set of Zone Mortalis stairs. I'll also add my own stairs and ramps to bridge this height difference in the KS files.

Also in picture are the first runs of the pipes that can be added to the buildings

More info at www.watcorpdesigns.com/modu-fab-kickstarter

Cheers

James


[Thumb - 20200109_192213.jpg]
[Thumb - 20200109_192334.jpg]
[Thumb - 20200109_192625.jpg]
[Thumb - 20200109_192531.jpg]
[Thumb - 20200109_192334.jpg]


Watcorp Designs - WOESTALKERS Kickstarter coming FEB! @ 2020/01/19 16:47:55


Post by: Kinetochore


Hi All,

Sorry to drag you away from the 9th Ed rumours but this is far more important.

The first of the Modutruck physical models is now on sale on my store (www.watcorpdesigns.com)

Got the post apocalyptic version on the way too.

What truck would you like to see in physical form next?


[Thumb - 20200118_164317.jpg]
[Thumb - 20200118_164220.jpg]


Watcorp Designs - WOESTALKERS Kickstarter coming FEB! @ 2020/01/19 17:22:21


Post by: Kid_Kyoto


Flatbed!

Lets players put whatever they want on the back!


Watcorp Designs - WOESTALKERS Kickstarter coming FEB! @ 2020/01/19 17:39:58


Post by: Theophony


 Kid_Kyoto wrote:
Flatbed!

Lets players put whatever they want on the back!

Like Orks


Watcorp Designs - WOESTALKERS Kickstarter coming FEB! @ 2020/01/19 18:23:13


Post by: Kinetochore


Sounds like a plan. I'll sort out the pickup truck back end the larger flat bed


Watcorp Designs - WOESTALKERS Kickstarter coming FEB! @ 2020/01/29 13:44:43


Post by: Kinetochore


Hi All,

In response to above request I have added the flatbed truck to the ebay store https://www.ebay.co.uk/str/watcorpdesigns and the https://www.Watcorpdesigns.com website store.

In addition I've been working on more Modufab bits and painting demo pieces (had a hard weekend distressing industrial terrain!)

Promo video for Modufab on Youtube
https://tinyurl.com/wepvw53

See below for more setups and the new connecting steps for compatability with Sector Mechanicus and Zone Mortalis stuff.

Also I've done a crane top to allow variable height Cranes that can rotate and the hook mechanism slides back and forth too.

Single man Guard Tower is on the printer now and I'm working on another more "reinforced Enforcer Precinct" type set of walls and bits too.

Cheers!

[Thumb - 83181192_322207395363234_8689884347903246336_o.jpg]
[Thumb - 83443949_322207432029897_3780161950281891840_o.jpg]
[Thumb - 83404935_320806688836638_3259766876426731520_n.jpg]
[Thumb - 83513293_320430242207616_287948085131214848_o.jpg]
[Thumb - 84324579_320806658836641_9029305966809579520_o.jpg]


Watcorp Designs - WOESTALKERS Kickstarter coming FEB! @ 2020/02/02 17:41:57


Post by: Kinetochore


Quick update on Modu-Fab- 27 days till launch!

Here's a print as 1 guard tower added as requested. Just finishing off the 1st additional terrain style - Enforcer Precinct. Pictures to follow when I've had time to do sexy renders

More at www.Watcorpdesigns.com

[Thumb - 20200131_230125.jpg]
[Thumb - 20200131_230138.jpg]
[Thumb - 20200131_230156.jpg]


Watcorp Designs - WOESTALKERS Kickstarter coming FEB! @ 2020/02/02 19:35:08


Post by: Kid_Kyoto


Well darn I'm gonna need that.

And a 3d printer.


Watcorp Designs - WOESTALKERS Kickstarter coming FEB! @ 2020/02/07 09:58:54


Post by: Kid_Kyoto


Got my walls last week, thanks!





Watcorp Designs - WOESTALKERS Kickstarter coming FEB! @ 2020/02/07 10:02:59


Post by: Kinetochore


Glad they all made it to you ok - Going to be quite the fortification when its done!


Watcorp Designs - WOESTALKERS Kickstarter coming FEB! @ 2020/02/09 14:06:37


Post by: Kinetochore


Been doing some work on some armoured precinct walls for one of the stretch goals (fingers crossed KS gets this far). Used 2 pots of Lead Belcher painting up examples pieces yesterday, will post pics soon.


[Thumb - Armored walls 1.JPG]
[Thumb - Armored walls 2.JPG]


Watcorp Designs - WOESTALKERS Kickstarter coming FEB! @ 2020/02/09 17:59:44


Post by: Kid_Kyoto


So, I guess at this point you're basically making stuff just for me?

I shared the good news to the Arbites FB group.

https://www.facebook.com/groups/1924169174551862/


Watcorp Designs - WOESTALKERS Kickstarter coming FEB! @ 2020/02/09 18:17:51


Post by: Kinetochore


Cheers for spreading the good word :-). I'll put up some renders of example assemblies and some real life action shots over the next few days


Watcorp Designs - WOESTALKERS Kickstarter coming FEB! @ 2020/02/11 15:51:30


Post by: Kinetochore


Quick preview of some of the walls and floors for the Armoured Precinct file set. Currently this is a stretch goal for the incoming Modu-Fab kick starter. The plan is to start with the industrial file set, then add more "themed" expansions like this as the project (hopefully) progresses. Got this Precinct done, a corridor set for more "Space hulky" type environs, as well as a"Meat Processing plant" and Fortress in the works but I'm open to other ideas if project does well.




Watcorp Designs - WOESTALKERS Kickstarter coming FEB! @ 2020/02/14 10:48:20


Post by: Kinetochore


Hi All,
Only 15 days to the launch of the Modu-Fab 3d printable terrain Kickstarter. All the files for the Industrial Terrain set are completed and I'm working on the stretch goals.
I'm looking for some feedback to deliver these in the order they are requested by the community - now's your chance to influence the direction of the kickstarter

As it stands they are:
1 – Additional pipe runs and connections including smoke stacks
2 – Guard Towers and Walls
3 – Armored Precinct
4 – Corridor Upgrades
5 – Meat Processing Plant
6 –AA guns, Cannons and Big Search Lights for Precinct
7 – Power Plant
8 – Fortress featuring Orbital Cannons, Gates and Missile Silos


I'm looking for feed back on the order of the themed stretch goals 5,7 and 8. Let me know which ones you want 1st!

Any other requests or additional themes please let me know!


Watcorp Designs - WOESTALKERS Kickstarter coming FEB! @ 2020/02/14 14:15:59


Post by: Kid_Kyoto


Y'know #8 seems the most exciting to me, so it becomes a question of do you lead with that, or dangle it for later to generate supporters.

I've never run a KS so I'm really not the one to say.


Watcorp Designs - WOESTALKERS Kickstarter coming FEB! @ 2020/02/14 15:51:35


Post by: Kinetochore


Yeah its a tricky balance - got to give the people what they want but need something to drag the masses in!


Watcorp Designs - WOESTALKERS Kickstarter coming FEB! @ 2020/02/21 12:50:04


Post by: Kinetochore


An Assault on Precinct 47 board I made using the Precinct 47 files and the guard towers and security fences.

13 days to launch - working on the Ground level pipe, connections and industrial chimneys and smoke stacks for the industrial terrain, as well as more variety of connecting pillars

Cheers


[Thumb - a.jpg]
[Thumb - d.jpg]
[Thumb - f.jpg]
[Thumb - h.jpg]


Watcorp Designs - WOESTALKERS Kickstarter coming FEB! @ 2020/02/21 14:39:46


Post by: Kid_Kyoto


Looking really good


Watcorp Designs - WOESTALKERS Kickstarter coming FEB! @ 2020/02/21 14:52:13


Post by: Kinetochore


Cheers - been good practice for speed painting terrain!


Watcorp Designs - WOESTALKERS Kickstarter coming FEB! @ 2020/02/21 15:27:38


Post by: Grot 6


The more I see, the more I have a soft spot for your gear.

Great Job!!!!

Are those truck parts still available?

Do you have bundles for the terrain?


Watcorp Designs - WOESTALKERS Kickstarter coming FEB! @ 2020/02/21 16:12:48


Post by: Kinetochore


Hi Grot,

I have a number of the trucks for sale ready printed on my website (www.watcorpdesigns.com)

The terrain is from the Modufab Kickstarter that is launching on February the 29th. Its only for the digital files rather than the physical product at this point.

Link to KS https://tinyurl.com/wepvw53


Watcorp Designs - WOESTALKERS Kickstarter coming FEB! @ 2020/02/29 09:21:47


Post by: Kinetochore


New Modufab Kickstarter is officially live as of 5 minutes ago!




3d printable terrain that can be assembled and disassembled for easy storage and different table designs.
No fiddley connection clips required
prints without support
strong stable construction

find out more on the kickstarter page!



Watcorp Designs - WOESTALKERS Kickstarter coming FEB! @ 2020/02/29 15:49:21


Post by: Kinetochore


Cheers :-)

Thanks for the Facebook share too.

I had to resist the urge to buy more Genestealer Cult in GW today. Not buying new plastic crack for 40 days! Had to buy paints I didn't need instead.


Watcorp Designs - WOESTALKERS Kickstarter coming FEB! @ 2020/03/01 16:09:36


Post by: Kinetochore



All funded in 9hrs and the first of the Stretch Themes now unlocked. Armoured Precinct ready to go!.

Onwards and upwards towards the next few goals

[Thumb - 20200218_144538.jpg]
[Thumb - 20200218_144755.jpg]


Watcorp Designs - WOESTALKERS Kickstarter coming FEB! @ 2020/03/02 16:04:46


Post by: Kinetochore


Update on the pipes stretch goal.

Here's some examples of the ground level pipes, wall connectors and the pipe join connectors

There are straight connectors, 90 degree connections, T connectors and 4 way connectors. In addition there are various tops and smoke stacks that can be fitted to the connector pieces.

Hope you like - I'm open to suggestions/requests

more here - https://tinyurl.com/saflkxw

Thanks



Watcorp Designs - WOESTALKERS Kickstarter coming FEB! @ 2020/03/04 10:13:19


Post by: Kinetochore


Meat Packing Plant Theme stretch goal has been unlocked!

Examples of the first few wall designs are shown below.

Also included in this theme are a number of "processing equipment Pieces" Renderisors, churning vats, the Disarticulator 5000, as well as conveyors, doors, and work benches among other accessories.

The rooftop weapons and search lights have also been unlocked - ideal for upgrading your Armoured Precinct Theme


Cheers

James

[Thumb - meat walls preview.JPG]


Watcorp Designs - WOESTALKERS Kickstarter coming FEB! @ 2020/03/07 08:39:56


Post by: Kinetochore


Another Modu-FAB update

Power Generator Stretch Goal Unlocked

The Power Generator Stretch Goal has been unlocked - this will add some more "Hi-Tech" looking walls and floor sections to the terrain, as well as more specialist pieces of equipment and giant cooling towers.

Update on Meat Processing Plant Theme

More files have been completed in the Meat Processing Plant Theme

The Renderiser is completed, as well as a large number of conveyor sections to link different levels and to feed into the other pieces of equipment. I've also done various floors featuring hoppers and grinders. More to follow.


[Thumb - Capture.JPG]
[Thumb - 1.JPG]


Watcorp Designs - WOESTALKERS Kickstarter coming FEB! @ 2020/03/11 09:47:18


Post by: Kinetochore


Another Update on the Project

Only £150 off unlocking the Fortress Stretch goal. I'm working on extra stretch goals to follow.

In the meantime here's an example of what you can put together - this is a Corpse Grinder Plant I built using the Meat Processing Plant Theme files from the kickstarter.




Watcorp Designs - WOESTALKERS Kickstarter coming FEB! @ 2020/03/11 10:49:28


Post by: Kid_Kyoto


Quotas must be met!

I love it.


Watcorp Designs - WOESTALKERS Kickstarter coming FEB! @ 2020/03/15 20:42:08


Post by: Kinetochore


Last of the original stretch goals has just been unlocked.

The modular fortress comes in 2 different height styles that can be combined to make double height walls. Walls are also compatible with the other Modu-fab files to allow for even more builds

see link below for video of the parts in action




link to kickstarter

https://www.kickstarter.com/projects/watcorpdesigns/modu-fab-a-set-of-fully-modular-3d-printable-industrial-ter?ref=bqjukw


Watcorp Designs - WOESTALKERS Kickstarter coming FEB! @ 2020/03/22 08:25:09


Post by: Kinetochore


Update on the Fortress designs

See below for renders of the fortress gate house and the roof mounted AA guns and Howizters .More on wall weapon options, landing pad and missile silo to come.

Only a few more backers to unlock more fortress interior options and movable lifts.




[Thumb - demo2.JPG]
[Thumb - demo.JPG]
[Thumb - 3.JPG]
[Thumb - AA.JPG]
[Thumb - Roof Cannon.JPG]


Watcorp Designs - WOESTALKERS Kickstarter coming FEB! @ 2020/03/28 13:22:14


Post by: Kinetochore


Hi All,

Hope everyone is safe and well.

Here's the latest from the Modufab Kickstarter - The missile Silo

Launch doors can slide along rails to open and close and features 2 weapon options

1 - the B.A.M - Big Ass Missile
or
2 - the M.I.L.F.S. - Multiple Independent Launch Firing System


[Thumb - 2.JPG]
[Thumb - 1.JPG]


Watcorp Designs - WOESTALKERS Kickstarter coming FEB! @ 2020/03/31 09:56:29


Post by: Kinetochore




Hi All,

Final week of the kickstarter - see below for videos examples of the fortress and other terrain pieces





Missile Silo test print




Watcorp Designs - WOESTALKERS Kickstarter coming FEB! @ 2020/04/04 15:11:07


Post by: Kinetochore


Last few Hrs of the Kickstarter - great push of support at the death and the movable lifts have been unlocked.

I've been hard at work on the fortress interiors. The first version of the tower is completed and I have 2 options for the upper walls completed.
at work on big defence cannon option for another tower.

Landing pad is laid out and just needs some detailing.

demo of lifts coming soon!

see below for fortress interiors.

Get in quick to avoid disappointment!

link to KS below!

https://tinyurl.com/wm4exkz


[Thumb - in1.JPG]
[Thumb - in2.JPG]


Watcorp Designs - WOESTALKERS Kickstarter coming FEB! @ 2020/04/24 12:30:33


Post by: Kinetochore


Hi All,

Kickstarter for Modufab was super successful and a massive thanks to everyone who supported. Late Pledges available through the website now (www.watcorpdesigns.com )

Still working through the last of the stretch goals but the vast majority of files are out in the wild.


 Filename VID_91740109_235236_472.mp4 [Disk] Download
 Description opening shutters
 File size 4342 Kbytes



Watcorp Designs - WOESTALKERS Kickstarter coming FEB! @ 2020/04/26 11:01:45


Post by: Kinetochore


New Physical Model and STLs available in store now - www.watcorpdesigns.com

Enforcer Patroller - for all your pacification needs!


[Thumb - 20200426_105823.jpg]
[Thumb - 20200426_105725.jpg]
[Thumb - 20200426_105736.jpg]


Watcorp Designs - WOESTALKERS Kickstarter coming FEB! @ 2020/04/26 12:11:28


Post by: Kid_Kyoto


Wow that is great. Going to have to pick some up.

Say what printer do you use, the terrain looks great.


Watcorp Designs - WOESTALKERS Kickstarter coming FEB! @ 2020/04/26 22:55:15


Post by: Kinetochore


Cheers- thought you'd like that one lol.

I've got quite a range of printers - cr10s, a few ender 3s, a few I3 mega, anycubic kossel delta and a couple of ultimaker 3s.

For quality and reliability at a decent price point the Ender 3 has to take the prize.


Watcorp Designs - WOESTALKERS Kickstarter coming FEB! @ 2020/06/14 18:16:08


Post by: Kinetochore


Another new release - Armour upgrades for Armigers for conversion to Nurgle Warhounds.

Available from www.watcorpdesigns.com


[Thumb - 20200609_080632.jpg]
[Thumb - IMG_20200609_104242_637.jpg]
[Thumb - IMG_20200609_104242_638.jpg]


Watcorp Designs - WOESTALKERS Kickstarter coming FEB! @ 2020/06/27 12:35:36


Post by: Kinetochore




Hi All,

A lot of new bits on the way. Latest addition to the store - Plague Axes - get them at https://www.watcorpdesigns.com/product-page/3x-plauge-axes


[Thumb - Capture.JPG]


Watcorp Designs - WOESTALKERS Kickstarter coming FEB! @ 2020/07/25 16:27:42


Post by: Kinetochore


Hi all,

I'm back again with a another project - this time for army specific "flags" that can be placed onto 40mm objective markers.

The flags can be placed and removed from objectives to show ownership and to track in game actions, as well as giving a cool visual to who owns what objectives.

Project will launch with 13 Flag types, from banners to a variety of Alien Tech and bits.

Also available is an option to build your own custom flags - simply send over a JPEG or SVG of your design and get it on a flag marker!

Make identification of who owns what objectives
Track in game actions for 9th edition

Choose to receive pre supported STLs of the finished designs or physical copies

Check out https://www.watcorpdesigns.com/objective-secured-kickstarter for more info.


[Thumb - launch date.JPG]
[Thumb - eldar 1.JPG]


Watcorp Designs - WOESTALKERS Kickstarter coming FEB! @ 2020/08/01 14:00:36


Post by: Kinetochore


More new designs - The Tau style transmitter station

[Thumb - Tau promo.JPG]


Watcorp Designs - WOESTALKERS Kickstarter coming FEB! @ 2020/08/09 10:50:00


Post by: Kinetochore


OBJECTIVE SECURED KICKSTARTER NOW LIVE!!

Objective secured kickstarter is now live - 27 days to go :-)

more explanation of the custom flags and some other flag designs below

find out more here - https://tinyurl.com/y2jyq7z7


[Thumb - HOW 1.JPG]
[Thumb - ALIEN.JPG]
[Thumb - DEMO 2.JPG]


Watcorp Designs - WOESTALKERS Kickstarter coming FEB! @ 2020/08/14 10:51:03


Post by: Kinetochore


Update on Objective Secured

100% funded in 4hrs!

1st stretch goal of more flags and banner pole styles unlocked

See below for more info on how the custom flags work and painted examples

take a look here for more https://tinyurl.com/y2jyq7z7

[Thumb - a.JPG]
[Thumb - b.JPG]
[Thumb - hiow.JPG]


Watcorp Designs - WOESTALKERS Kickstarter coming FEB! @ 2020/08/31 09:11:32


Post by: Kinetochore


Only 5 days left to back.

Extra styles of objective markers unlocked.

Here's a render and real life print of the "Evil Space Elf" capture marker


[Thumb - IMG_20200831_070133_530.jpg]
[Thumb - IMG_20200829_094628_961.jpg]


Watcorp Designs - WOESTALKERS Kickstarter coming FEB! @ 2020/09/03 08:34:47


Post by: Kinetochore


Less than 60hrs left to back.

City Themed Objective Marker preview


[Thumb - city obj.JPG]
[Thumb - city promo.JPG]


Watcorp Designs - WOESTALKERS Kickstarter coming FEB! @ 2020/09/03 10:46:19


Post by: Skinnereal


OK, you got me
I've really got to get those trucks painted up, too.


Watcorp Designs - WOESTALKERS Kickstarter coming FEB! @ 2020/09/05 14:55:34


Post by: Kinetochore


:-) Cheers for jumping on board - would love to see some the Modutrucks you've come up with painted up.

I'm so busy with designing new stuff and running various stores I never get to put a dent in my painting!


Automatically Appended Next Post:
Last few hrs to back

The Energy Pillar Stretch has been unlocked!

back here https://www.kickstarter.com/projects/watcorpdesigns/objective-secured


Watcorp Designs - WOESTALKERS Kickstarter coming FEB! @ 2020/09/27 17:55:00


Post by: Kinetochore


Hi All,

After all the fun with Objective secured I've started adding to my conversion parts range again.

This time I bring you - the rotatable Chaos Knight Scale Chain Cannon.

Chain cannon barrel is free to rotate around central axis. Features chaotic spikes and symbols and an underslung dragon headed flame thrower. Can be bought with and without the elbow attachment

I've made this available as pre-printed parts or as a print your own STL file pack at my site.

Pre-printed parts - [url]https://www.watcorpdesigns.com/product-page/chaos-knight-scale-rotating-chain-cannon[url]

STLs - https://www.watcorpdesigns.com/product-page/chaos-knight-chain-cannon-stl

Cheers

[Thumb - w uppper arm 1.jpg]


Watcorp Designs - WOESTALKERS Kickstarter coming FEB! @ 2020/11/01 09:41:05


Post by: Kinetochore


Hi All,

More great stuff released

Chaos Knight Scale Thermal Cannon - Physical model and 3d Pintable files available

Chaos Knight Clawed Feet - Physical Model
Heretic Scout Walker - 3d printable File


Check them all out at www.watcorpdesigns.com

Any comments, feedback or requests let me know!

[Thumb - 1.JPG]
[Thumb - 2.JPG]
[Thumb - PROMO 1.JPG]
[Thumb - PROMO 2.JPG]
[Thumb - 3.jpg]


Watcorp Designs - WOESTALKERS Kickstarter coming FEB! @ 2021/01/07 21:31:10


Post by: Kinetochore


Hi All,

I'd like to announce the next big project from Watcorp Designs

WOESTALKERS

This a kickstarter launching in February to create home 3D printable 200mm height tripod warmachines (actual height can vary between 185mm and 220ishmm depending on stance)

These are mulitpart models with fully poseable legs and a range of weapon options

Checkout the Watcorp Designs website ( www.watcorpdesigns.com/woestalkers )for more info and/or follow on kickstarter (https://tinyurl.com/y5k2s7eoto) to keep abreast of launch date.

See below images for examples of whats coming.

Any comments or questions please fire away!

[Thumb - ks 1.JPG]
[Thumb - MULTIPART.JPG]
[Thumb - LEGS.JPG]


Watcorp Designs - WOESTALKERS Kickstarter coming FEB! @ 2021/01/07 23:11:09


Post by: kestral


I do like Chaos war machines that are not too far over the top.


Watcorp Designs - WOESTALKERS Kickstarter coming FEB! @ 2021/01/08 09:08:12


Post by: Kinetochore


Thanks,

Sometimes a bit of subtlety is good. I'm aiming for a more "scary, unknowable malice" type vibe with these but also got some more traditional variants with cockpits and overtly chaos bits on the drawing board depending on interest.



Watcorp Designs - WOESTALKERS Kickstarter coming FEB! @ 2021/01/12 16:39:35


Post by: Kinetochore


More Updates on WoeStalkers

As well as the larger, Knight sized WoeStalkers I've designed some smaller bots termed "Hunters"

These are also mult-part kits with multiple weapon load outs in development. Again, like their larger cousins these have multipart legs for a huge variety of poses in the finished model.

Link to follow on kickstarter https://www.kickstarter.com/projects/watcorpdesigns/woestalkers

More detailed info at www.watcopdesigns.com/woestalkers

Happy Hobbying

[Thumb - hunter 1.JPG]
[Thumb - hunter2.JPG]


Watcorp Designs - WOESTALKERS Kickstarter coming FEB! @ 2021/01/12 16:56:01


Post by: judgedoug


Hot dang, those will be very useful, of course, for Blood Pact Stalk Tanks. Will they be able to be scaled down to 6/8mm for use in Epic?


Watcorp Designs - WOESTALKERS Kickstarter coming FEB! @ 2021/01/12 17:37:58


Post by: Kinetochore


These guys as they stand wont be scalable due to being multipart but I can certainly do some for epic scale if there's demand