Forum adverts like this one are shown to any user who is not logged in. Join us by filling out a tiny 3 field form and you will get your own, free, dakka user account which gives a good range of benefits to you: No adverts like this in the forums anymore. Times and dates in your local timezone. Full tracking of what you have read so you can skip to your first unread post, easily see what has changed since you last logged in, and easily see what is new at a glance. Email notifications for threads you want to watch closely. Being a part of the oldest wargaming community on the net. If you are already a member then feel free to login now.

Can you tell me some shop(from Europe preferably) where I can buy those tubing ,like those used here:
http://www.tauonline.org/Article/113/GunJeepWalkthrough/

and even smaller than those used in this tutorial,so I can use them for gun barrels...

Well the medium tubing should be available from a hardware or plumbing type store.

Alternatively you could buy some kids colouring pens and cut them up...

Ebay is your best bet. Put Plastic Tube into the Crafts section and you should get something.

Just use brass tubing. It's durable and easy to cut.

http://www.onlinemetals.com/merchant.cfm?step=2&id=84&showunits=mm&top_cat=79

Plastic rod, sheet, tubing and all sorts of other stuff here. I've ordered from them before, and they were brilliant. http://www.mainlytrains.co.uk/acatalog/gen-plasticssheetsectionrodtubeetc.html

hi all,

i had been looking for some sort of plasicard or plastruct round tubes to use as typhus type vents on my vehicles, terminators etc etc. i found a very good company that supplied me with some very nice quality stuff that will do just the trick.


WWW.model-dockyard.com

i bought 2.4mm tube,3.2,4,4.8,5.6,7.1,8 and 9.5 mm for under £25 delivered. looks like it will work out very nicely.

hope this helps

phill

(based in UK)