|
|
 |
Vindicator front shield | Created by DarkKnights44 |
| Paintjob Rating: Voting Disabled | Number of Views: 721 |
| Coolness Rating: Voting Disabled | Number of Votes: - |
|
|
|
Image Description:
Here is the shield for the Vindicator. Used the 1/4" x 1/16" (6mm x 1mm) disc magnets in the arms. Another tight fit, but if you take your time, the sides of the drill hole will be still in place and you won't see the magnets. If you are off center, can always GS it to cover the magnet. The arms I had to modify as well, so that the shield would fit properly when attached. They are glued on to the shield, but had to file the peg and the small block off, as well as file the side down, same side as the peg, so that the arms lined up with the attachment points on the hull. I also did some modifications to the shield for the two small hatches. They are just so the headlights can be used. I used 1/16" x 1/32" disc magnets as hinges as well as the latch for when they are in the closed position. If you want to know how I did it, just ask, I'm not going to explain it in detail, since most people won't bother doing it. |
|
Comments:
No comments have been added yet. Be the first! People love to hear what others think about their projects so please let them know.
You must be logged in to post comments.
|
|
|
|
|
|
