Author |
Message |
|
|
|
Advert
|
Forum adverts like this one are shown to any user who is not logged in. Join us by filling out a tiny 3 field form and you will get your own, free, dakka user account which gives a good range of benefits to you:
- No adverts like this in the forums anymore.
- Times and dates in your local timezone.
- Full tracking of what you have read so you can skip to your first unread post, easily see what has changed since you last logged in, and easily see what is new at a glance.
- Email notifications for threads you want to watch closely.
- Being a part of the oldest wargaming community on the net.
If you are already a member then feel free to login now. |
|
|
2024/04/02 06:23:36
Subject: Forgeworld Quality
|
|
Preparing the Invasion of Terra
|
Not sure why buying into Heresy is a problem when it's largely plastic kits now. You're only buying Legion upgrades or special units and as has been noted by multiple people, smaller kits are less likely to have QC issues and the newer kits are even less likely to have them.
|
|
|
|
2024/04/02 07:08:42
Subject: Re:Forgeworld Quality
|
|
Gore-Drenched Khorne Chaos Lord
|
CynosureEldar wrote:I paid ~180$ for a model that has gaps so big I can see my desk though them. No chance for Customer support, since it's second hand. Great. Guess I'm not buying into 30k Thanks for the info guys, wanted to be sure that the seller wasn't being shady or anything, and it sounds like the shady is actually FW.
I mean the seller maybe was being shady still, they maybe had a badly warped kit they cba to talk to customer support about so sold it on to make it someone else's problem.
|
|
|
|
2024/04/02 15:33:43
Subject: Re:Forgeworld Quality
|
|
Arch Magos w/ 4 Meg of RAM
|
The only legit FW model i own is a tantalus and it was definitely not trivial to clean and assemble, but i was lucky and mine had a minimal amount of flash and no mold slipping. It's still a very old kit that is notoriously fiddly, I remember needing to do quite a lot of sanding/gap filling when i had to assemble the bridge that holds the sail.
Modern FW kits are much better at least, shame we can't know on the store if a certain model is old or new
|
|
|
|
2024/04/02 21:56:18
Subject: Forgeworld Quality
|
|
Ship's Officer
|
OP is probably a amateur with resin work, that’s normal or slightly below for what’s necessary to prep the resin before painting. As someone with quite a bit of experience, I recommend you get the right tools and use them correctly: set of jewelry files, hand saw and mat, xacto, green stuff, clipper, 😷, hot water heater and container big enough to fit the resin parts, paper clips, handheld drill vise and drill bits, magnets, super glue, JB weld.
|
|
|
|
2024/04/02 22:39:06
Subject: Forgeworld Quality
|
|
Longtime Dakkanaut
|
Big Mac wrote:OP is probably a amateur with resin work, that’s normal or slightly below for what’s necessary to prep the resin before painting. As someone with quite a bit of experience, I recommend you get the right tools and use them correctly: set of jewelry files, hand saw and mat, xacto, green stuff, clipper, 😷, hot water heater and container big enough to fit the resin parts, paper clips, handheld drill vise and drill bits, magnets, super glue, JB weld.
Or we could just insist that FW make a better product.
By all accounts, they're trying, and they have gotten better. Still too rich for me anyway, and I think that's the real problem (as others have pointed out): if you want to sell a model that requires extensive effort to salvage, simply avoid charging a premium price.
|
|
|
|
2024/04/02 23:31:06
Subject: Forgeworld Quality
|
|
Longtime Dakkanaut
|
It’s been hit or miss for me over the years, my eldar vehicles have all been fine, tau mostly fine, Imperium all over the place!
Definitely the lowest grade of any resin I ever got as a whole.
It’s the whole “Did anyone look at it” shock I got a few times why I don’t buy, combined with the prices.
|
|
|
|
2024/04/02 23:49:14
Subject: Forgeworld Quality
|
|
Agile Revenant Titan
|
I had to stop buying FW kits @ 4 years ago as the quality didn't match the price tag in my opinion. I've bought resin kits from other companies with much less fuss.
For the OP, it would not be surprising what you bought is from FW judging from the photos you posted.
|
No earth shattering, thought provoking quote. I'm just someone who was introduced to 40K in the late 80's and it's become a lifelong hobby. |
|
|
|
2024/04/03 01:31:32
Subject: Forgeworld Quality
|
|
Perfect Shot Dark Angels Predator Pilot
|
Apparently I've been quite lucky with the Forgeworld models I got, two Necromunda vehicles went together quite well, even though the plastic/resin hybrid was a bit annoying. The Necromunda propaganda models had one very small part that had snapped in half, is was extremely fiddly to get that fixed, but other then that I had no problems.
But those are rather new kits so it matches other people's results. The resin was well cured, not like TTCombat resin that refuses to hold any paint, regardless how much I scrubbed and cleaned it ....
|
|
|
|
2024/04/03 04:16:51
Subject: Forgeworld Quality
|
|
[MOD]
Making Stuff
|
Big Mac wrote:OP is probably a amateur with resin work, that’s normal or slightly below for what’s necessary to prep the resin before painting. As someone with quite a bit of experience, I recommend you get the right tools and use them correctly: set of jewelry files, hand saw and mat, xacto, green stuff, clipper, 😷, hot water heater and container big enough to fit the resin parts, paper clips, handheld drill vise and drill bits, magnets, super glue, JB weld.
It's normal for poorly cast resin. I've bought resin models from other companies that needed practically no prep work beyond gluing them together and some very minor mould line removal.
|
|
|
|
|
2024/04/03 11:15:37
Subject: Re:Forgeworld Quality
|
|
Frenzied Berserker Terminator
|
Dudeface wrote: CynosureEldar wrote:I paid ~180$ for a model that has gaps so big I can see my desk though them. No chance for Customer support, since it's second hand. Great. Guess I'm not buying into 30k Thanks for the info guys, wanted to be sure that the seller wasn't being shady or anything, and it sounds like the shady is actually FW.
I mean the seller maybe was being shady still, they maybe had a badly warped kit they cba to talk to customer support about so sold it on to make it someone else's problem.
May well be that customer support already replaced it and he's selling on the crappy original... I think my resin Incubi came to me via that route!
|
|
|
|
2024/04/03 20:44:43
Subject: Forgeworld Quality
|
|
Horrific Howling Banshee
|
Gert wrote:Not sure why buying into Heresy is a problem when it's largely plastic kits now. You're only buying Legion upgrades or special units and as has been noted by multiple people, smaller kits are less likely to have QC issues and the newer kits are even less likely to have them.
why would anyone buy into a company that clearly cares so much about quality parts at crazy prices..... I hate GW for their shady and outright hostile attitude towards customers, but I can't seem to completely stop buying gak from them because it's hella quality - even my eldar walkers (20+year old kit) are leaps and bounds over many competitors....
Big Mac wrote:OP is probably a amateur with resin work, that’s normal or slightly below for what’s necessary to prep the resin before painting. As someone with quite a bit of experience, I recommend you get the right tools and use them correctly: set of jewelry files, hand saw and mat, xacto, green stuff, clipper, 😷, hot water heater and container big enough to fit the resin parts, paper clips, handheld drill vise and drill bits, magnets, super glue, JB weld.
I'm fairly sure that was a joke, because it's really quite funny in that context, and brightens my day.
Crispy78 wrote:Dudeface wrote: CynosureEldar wrote:I paid ~180$ for a model that has gaps so big I can see my desk though them. No chance for Customer support, since it's second hand. Great. Guess I'm not buying into 30k Thanks for the info guys, wanted to be sure that the seller wasn't being shady or anything, and it sounds like the shady is actually FW.
I mean the seller maybe was being shady still, they maybe had a badly warped kit they cba to talk to customer support about so sold it on to make it someone else's problem.
May well be that customer support already replaced it and he's selling on the crappy original... I think my resin Incubi came to me via that route!
That now, that I could see....
|
Badablack wrote:40k starts with the question, “Who is worse, Satan or the Nazis?” And goes from there. It’s a big colorful ball pit full of horrible people screaming and shooting each other.
PenitentJake wrote:It doesn't matter if you're not dominating the game; if you have 3-4 x as many models and options than the rest of us and you're still getting new kits, we're still gonna rip on the faction. If I had 100 + Drukhari kits all in plastic to choose from, or 100 + Sisters kits, I think I'd be more likely to be receptive to Space Marine player's complaints about anything.
chromedog wrote:From the Fuggly DEldar of the time, before they let Jes goodwin have his good and proper way with the entire faction design.
I don't want the best army, just one that isn't an exercise in picking up my models by turn 3.
|
|
|
|
2024/04/03 21:13:14
Subject: Forgeworld Quality
|
|
Preparing the Invasion of Terra
|
CynosureEldar wrote:why would anyone buy into a company that clearly cares so much about quality parts at crazy prices..... I hate GW for their shady and outright hostile attitude towards customers, but I can't seem to completely stop buying gak from them because it's hella quality - even my eldar walkers (20+year old kit) are leaps and bounds over many competitors....
I'm not sure what you're meaning now because plastic is a waaaaay better material than resin and as mentioned, a good chunk of the Heresy range is plastic and it will only continue in that direction.
|
This message was edited 1 time. Last update was at 2024/04/03 21:17:32
|
|
|
|
2024/04/03 22:00:45
Subject: Forgeworld Quality
|
|
Ultramarine Chaplain with Hate to Spare
|
CynosureEldar wrote: - even my eldar walkers (20+year old kit) are leaps and bounds over many competitors....
20+ years . . . Wait, are we talking about the metal ones? Those are lovely models but I remember having to pin the heck our of them.
Unless the plastics really did come out 20 years ago . . . How old am I?
|
|
|
|
|
2024/04/03 22:03:23
Subject: Forgeworld Quality
|
|
[MOD]
Villanous Scum
|
Plastics came out in 2006. Yes we are old... Though I remember the Vyper releasing as well.
|
On parle toujours mal quand on n'a rien à dire. |
|
|
|
2024/04/03 22:40:55
Subject: Forgeworld Quality
|
|
Ultramarine Chaplain with Hate to Spare
|
ingtaer wrote:Plastics came out in 2006. Yes we are old... Though I remember the Vyper releasing as well.
Ahh, the Vyper. Still a fantastic model. I forget which came first, the Vyper or the Falcon, but they were both late 2nd ed era, iirc.
|
|
|
|
|
|