Forum adverts like this one are shown to any user who is not logged in. Join us by filling out a tiny 3 field form and you will get your own, free, dakka user account which gives a good range of benefits to you: No adverts like this in the forums anymore. Times and dates in your local timezone. Full tracking of what you have read so you can skip to your first unread post, easily see what has changed since you last logged in, and easily see what is new at a glance. Email notifications for threads you want to watch closely. Being a part of the oldest wargaming community on the net. If you are already a member then feel free to login now.

Okay, ever had that feeling you've bitten off more than you can chew?

This is my new project, which I aim to have completed by September 2014. It's a 28mm Warlord Titan, produced by Engen Studios out of Michigan.

The model stands 30 inches tall, weighs 22 kilos, and is simply massive. There is also a surprising amount of detail, which I intend to try and add to.

The Warlord is primarily resin (which explains the weight!), and on first inspection has weathered the trip from Michigan to Perth (Western Australia) then on to me in Queensland very well indeed. Couple of minor breakages, which are very easily fixed. I have noticed a couple of tiny spots of "sweaty" resin - feels still very slightly wet or miscured, but I can work around them.

The weapons layout is a Gatling Blaster, Twin Turbo-laser Destroyers, and a Plasma Destroyer...these are all cast resin, and solid.

Here's a link to a video the makers posted of how they made these:

http://www.youtube.com/watch?v=gjdy4nQV79Q

And a link to the warseer post by the makers:

http://www.warseer.com/forums/showthread.php?314041-Warlord-Battle-Titan-Commission

At the moment, this is my rough "plan of attack" for this project:

* try and contact original makers (have sent a few emails already) and get any more background possible
* repair minor breakages
* decide on sub-assemblies for painting
* build a "jig" or sub-frame to hold torso and head assembly for painting...
* decide on additional pieces to be attached (Legio badges, aquilas, purity seals, AM symbols etc)
* buy necessary paints
* sand / fix anything needs fixing
* undercoat black
* start painting...

I've decided to go with my "Legio Ferrata" colour scheme - Vallejo Scarlett red for armour plates, silver, bronze and gold trim for details, and a bleached bone / skull white head. (The Reaver below is an example.)

Any advice / constructive criticism / knowledge of these immense models would be greatly appreciated!

Holy insanity batman! That thing is huge!

Good luck with this project.

Beautiful model. You did get a chuckle out of me first thing this morning with the Titan standing on top of the barstools. I can hear it saying "I IZ EMPEROR TITAN" .

STC_LogisEngine wrote:Good luck with this project.

Thanks...I think I'm gonna need it...

Theophony wrote:Beautiful model. You did get a chuckle out of me first thing this morning with the Titan standing on top of the barstools. I can hear it saying "I IZ EMPEROR TITAN" .

You just had me laughing out loud! Hadn't thought of that.

Also, I should have noted in the OP that -

* I have seen these referred to as "true-scale" Warlords, FWIW.

* I'm also thinking about void-shield emitters (like on the FW Reaver) and point-defence-weapon turrets (like the old Epic days.)

Right, quick update on the Warlord...

I've managed to contact the original manufacturers via facebook...just waiting on a reply to a few queries...

I've started repairing some minor breaks, and have glued a few little details back into place, but nothing photo-worthy.

Oddly enough, I've found that one of the hip joints attachs really easily, and the other one is almost impossible to slide together - yet, to the old mk 1 eyeball, they look identical .

One thing that came together well was the "jig" that I made to hold the upper torso - amazing what a big old thick curtain-rod, a plank of heavy pine, and some screws can achieve. (photo below)

Also worked out my sub-assemblies - torso and head, hip joint, chest plate (which fell off), individual legs, turbo-lasers, gatling, plasma, weapon armour plates, and finally, all the little details bits to be pre-painted then attached.

I'm going to do the chest plate first, to check my colour scheme in this scale, and make sure everything sticks to the original primer - here's hoping...

Now to find a bulk discounter of araldite, boltgun metal, and black undercoat...

 Padre wrote:
The weapons layout is a Gatling Blaster, Twin Turbo-laser Destroyers, and a Plasma Destroyer...these are all cast resin, and solid.

Good grief, how much do they weigh?

 ProfessionalAmateur wrote:

 Padre wrote:
The weapons layout is a Gatling Blaster, Twin Turbo-laser Destroyers, and a Plasma Destroyer...these are all cast resin, and solid.

Good grief, how much do they weigh?

Best guess is about 2 kilos each...the rear frame is hollow resin, to mount over the arms, but the barrels and details are solid resin...I'm not looking forward to drilling them out!

Right, just heard some more detail from Engen Studios (those freakishly skilled individuals who made this beast):

"We have made a total of 11 titans and yours is #11. We actually never stopped making titans but have been working on other projects and the demand for such a beast is limited though we are taking a commission for #12 right now! Your titan was actually shipped to Australia in October of 2013 so it wasn't in the original owners hands for long.

The resin we use is Model-Pro 2 part casting resin, the primer is Rust-Oleum Flat Grey Primer and works well with GW and Vallejo paints. Most of the assembly is with Loctite 2 part Epoxy and super glue.

We will be following the blog and feel free to ask any other questions!"

The lady who sold the Titan to me told me that she originally bought it as a surprise present for her boyfriend, who she then seperated from shortly after! (Damn, bet he's kicking himself he didn't snaffle the Titan before he went... )

Quick edit - managed to get the main guns drilled out today...didn't feel like miniature painting, somehow...

I've been thinking of names for her..."Magna Mortem" seems appropriate ("big death" ) but "Mater Lacrimis" ("mother of tears") striikes a chord with me as well...

Anybody else got any suggestions?

Crazy, can see you turning up to a 30,000 point game and watching the garage clean out in tears...

Holy mother of insanity, that thing looks awesome! At that size, surely it can just stomp other titans and not evennotice their tiny pea shooters grazing it! I will be watching this with interest. Good luck with the project!

As to names, an old role-play character name of mine springs to mind.

"Adduco Tenebrae", or "Bringer of Darkness" for all the death that that thing is going to bring to the table.

Bringer of darkness sounds cool , it could also refer to the shadow it casts over the battlefield just by its presence. Mother of tears sounds good, but I never see a woman when I see a Titan, its all a different type of sexy to me .

This beast is coming along nicely, the finished product should be amazing! It's in dire need of some rivets though, those flat surfaces are just begging for some extreme detailing.

Folks, thanks for all the feedback.

Just a quick update (photos to follow), ala the original plan:

* try and contact original makers (have sent a few emails already) and get any more background possible - DONE
* repair minor breakages - IN PROGRESS
* decide on sub-assemblies for painting - DONE
* build a "jig" or sub-frame to hold torso and head assembly for painting... - DONE
* decide on additional pieces to be attached (Legio badges, aquilas, purity seals, AM symbols etc) - DONE
* buy necessary paints - DONE, in the mail...
* sand / fix anything needs fixing - IN PROGRESS
* undercoat black - STARTED, trial piece turned out beautiful...
* start painting...

I've always viewed Titans very much as portrayed by Dan Abnett, the ponderous, implacable "land-battleships" of the 40K battlefield...you don't normally get to see them up close if you're the enemy, cause you're dead if you get within 5 klicks .

Because of the existing details on the model, I really don't want to "over-do" adding further decoration, so I'm going to keep it fairly subdued, and let the massive slabs of resin speak for themselves.

I do want to add further detailing to the superstructure, particularly the shoulders and edges...Zinge Industries, with their flexible resin rivet strips, might be getting a fair slab of my budget...already decided I'm going to get a fair few of their resin ventilation / exhaust fans for the rear of the Titan, and the Plasma Destroyer, especially.

I was thinking of adding LEDS to represent void shield emitters to the shoulders, but drilling through 6 INCHES of resin is just too risky, IMHO . The torso is designed for strength, not drilling holes in!

RE Rivets on the main armour slabs, I aim to keep it in line with the rivetting aesthetics on the FW Reaver...ie "less is more".

More to come after Easter...

PS Also, the tabletop is not an issue for me...I don't play, and haven't since 3rd edition - WAAC players in the local scene ruined it for me. Just paint for the joy of it.

Padre,

Not to disparage Zinge's excellent flexible resin stuff, including their rivet strips, but wouldn't you be better off getting something like this?

http://www.modeldesignconstruction.co.uk/mall/productpage.cfm/ModelDesignConstruction/_E48008/54282/Rivet%20Maker%201%2F48%20Scale

Whoa!! I will be watching this with interest. Maybe one day you will blow my army off the battlefield with it!

 Conrad Turner wrote:
Padre,

Not to disparage Zinge's excellent flexible resin stuff, including their rivet strips, but wouldn't you be better off getting something like this?

http://www.modeldesignconstruction.co.uk/mall/productpage.cfm/ModelDesignConstruction/_E48008/54282/Rivet%20Maker%201%2F48%20Scale

Thanks Conrad, very intriguing...I see they also do a 1/32nd scale...

RE the ginormous rivets (like on the big plates on the FW Reaver), I'm actually considering using thumb tacks...they're about the same size, scale-wise, as the FW rivets!

Not entirely jealous of the amount of work you have ahead of you, but seeing that thing complete is going to be glorious. Really looking forward to more about this!

Work continues apace on the Warlord...

Firstly, I found out that I didn't get away damage-free in transit after all... I went to have a closer look on the torso section, and the left shoulder assembly (where the turbolasers mount to) came off in my hand! Looks like it copped a hell of a bump at one stage or another - there's a few scuffs and dents to the side and rear resin that I intend to fix up.

So, I've spent a bit of time fixing that, sanding off the older glue, realigning it and aralditing it back on (great stuff, two-part epoxy...). Unfortunately, it did leave a light gap compared to the right shoulder, and some other little spaces to fill, so I got out the green stuff and the vallejo plastic putty, and started filling. All done now - just need to sand it back.

My aim is to leave the torso and head section to last - I've got some plasticard strips coming that I intend to use to protect and re-shape some of the "softer" resin edges, and have decided on some of Zinge Industries scenery pieces (large and small fans, etc) to add some more detail to the back and side sections of the torso, including faux void shield emitters - I'm going to put these where the Chaplain is standing in the photos below.

The basecoating of the weapons and armour plates is going well, and I've just started a leg...photos below. The more I see of this model, the more I say "I'm gonna need more paint, and pieces, and plastic card..."

Also, my vallejo paint arrived today...as always, a big shout out to Aaron Cains of "Back 2 Base-ix" - excellent service.

I'm still toying with the idea of some Carapace-mounted multilasers for the rear shoulders - any opinions or suggestions out there? According to the old fluff (in my case "Epic 40000 : Firepower" magazine no. 1), these were twin turrets mounted on the rear of the Titan, and added two multilasers with a 180 degree rear firng arc, at the cost of one void shield.

Now, as I don't play, tabletop "effect" doesn't mean much to me, but having good looking turrets does - anybody got any ideas?

Hell, I could almost mount a couple of full-size Hydra batteries on the back of this thing, and they'd look about right!

I am genuinely intimidated at the idea that there is a Warlord Titan under construction in the Brisbane region! Would love to see it in the flesh if you end up taking it out...

You're an inspiration to us all...

Since the figures are so small in comparison to the titan, could you post a picture next to a person for scale? It is quite hard to get a realistic sense of the size of this thing!

Can do...I'll try and get a fair bit more base coating done in the next couple of days, and post a piccie of her assembled and basecoated...

GO MAN GO!!

we are all living Vicariously thru you!

You know I love this thread, I also checked out the MFG webpage. First, I whole-heartedly expected this group to be UK based. Nope...Michigan USA. (Good to see those leftover machineries from the Detroit auto meltdown are in good use ). I also expected the $$$ of this monster to be substantially more, especially considering they are pretty much one-off orders to customer needs and not mass produced. I think it is priced really well.

How much was it?

Base price is $1600 with some options available (such as chaos iconography) that are customer specific and negotiated. But that includes weapons from what I can tell so not bad when you consider the reaver is a solid $1K

Dang it!! You made me lose my jaw again!!

Just out of general curiosity, is there anything wrong with using the stats from the old apocalypse book?

Well the structure point system is gone, so just multiply SP by x3 and that will give you the related HP's. Other than that I don't se much issue.

Thanks for sharing this, Padre. I'm genuinely excited to see it progress and I'm sure you'll make a fantastic job of it!

Looks amazing, well done so far