Apparently, I was so "trigger happy" with results that managed to cause some unlucky misunderstanding. I'm sorry about that, and explanations are in order.
Brushfire resin kits come with varying amount of extra bits for customisation. Having spent some time looking at poor heads, left without bodies after assembling of Tribes of Zabar starter, I've finally decided to try my hand at sculpting. Since this seemed easy (lots of laughter here, please!), I've added the difficulty of making a multi-part kit, since what can be easier? Just sculpt a few bits, clone them and... Patience and determination sometimes make up for total lack of skill.
Remnants of the kit included 3 warthog heads. A single posed body plus several arms for some variety should be enough, right? Well, problems started right away, when having made the basic dummy, I've decided to take it apart to have a better access while bulking it out. A millimetre here, another there, and what was intended to be a 35mm figure, matching the height of Brushfire kit, ended being full 40mm to the eye. Oops!!! Sculpting was going in parallel with attempts at casting, as this process was found not trivial enough, but in the end it helped.
Results of this ordeal can be seen below, or in the first post.
Yours, camer-jester Wirecat.
There are some more leftover parts waiting in the line...