schoon wrote:
Very cool!

What size are the small squares on each tile?

50mm or 2 inch

New building out today.

A Necron themed building.

This is the pantheon, measuring 270x270x94mm's

http://www.wargame-model-mods.co.uk/ourshop/prod_6401560-Pantheon-Necron-themed.html

https://www.ebay.co.uk/itm/112991422863

The top platform is removable leaving access to the inside of the building, which features a full base.

16 windows and 4 doors with enough optional inserts to cover them all.

Also come with 4 large and 4 small ladders that fit the outside of the building.

Packed with details and interesting designs.

RRP is £16.99.

Fits in great with the rest of my Necron range (last picture)














Also during May there is a give away on maze of the dead orders.

May give away with maze of the dead orders.

Any orders of the maze of the dead during May will receive £12.50 worth of addons/ extra free per 4 tiles in the order.

Eg. a 4x4 maze of the dead will receive £50 free addons / extras.

You can choose them from this category.

http://www.wargame-model-mods.co.uk/ourshop/cat_1282817-Addons.html

To receive the free items place your order then email me with your order no. and a list of the free items you would like.

Maze of the dead found here.

http://www.wargame-model-mods.co.uk/ourshop/cat_1227096-Maze-of-the-dead.html

Ends May 31st

One large Necron themed Tower.

Packed with details and interesting designs

The tower is ten sides and each side features a large parapet that stick out about the top of the tower.

Great for blocking line of site for large models and flyers and fits in great with the rest of my Necron theme buildings.


Dimensions are
wide 190mm
depth 190mm
height 290mm







http://www.wargame-model-mods.co.uk/ourshop/prod_6407954-Tower-Necron-themed.html

Currently there is a give away on my site up to £100 of free items see link for details

http://www.wargame-model-mods.co.uk/ourshop/cat_1227096-Maze-of-the-dead.html

What's the recommended way to prime a building with LEDs ?
Should I use masking tape/poster tack to prevent the LEDs from being hit by the spray ?

Samko wrote:
What's the recommended way to prime a building with LEDs ?
Should I use masking tape/poster tack to prevent the LEDs from being hit by the spray ?

Paint before building, its the only way to be sure.

Samko wrote:
What's the recommended way to prime a building with LEDs ?
Should I use masking tape/poster tack to prevent the LEDs from being hit by the spray ?

Hello, you can place a bit of blue tac on the led or tape, you can also scrape the paint of with a blunt item very easily if you do get paint on the led's at it does not bond with it

lethalerror wrote:

Samko wrote:
What's the recommended way to prime a building with LEDs ?
Should I use masking tape/poster tack to prevent the LEDs from being hit by the spray ?

Hello, you can place a bit of blue tac on the led or tape, you can also scrape the paint of with a blunt item very easily if you do get paint on the led's at it does not bond with it

What was giving me trouble was the LEDs that are unreachable when the building is fully assembled, so it would have been impossible to scrape off the primer if it would get on a LED.

Pete Melvin wrote:

Samko wrote:
What's the recommended way to prime a building with LEDs ?
Should I use masking tape/poster tack to prevent the LEDs from being hit by the spray ?

Paint before building, its the only way to be sure.

Thanks, that's what I did, even if I wanted to avoid it.

New product today, a brand new workstation.

A large paint station featuring drawers and a paint holder.

This will store 18 gw paints, both round and the old hex pots.

Dimensions are
120mm high
400mm side
295mm deep

https://www.wargame-model-mods.co.uk/ourshop/prod_6419881-Hobby-workstaion-for-Gw-paints.html

https://www.ebay.co.uk/itm/113035445777

There will be version coming over the next couple of weeks for over types of paint, droppers, glass pots and so on








June give away

Any orders for building kits over £100 will received one free building of your choice worth up to £25

To redeem this offer, purchase the building kits you are after then email me and let me know what free time you want.

Be sure to include a order number or name so i can find and add it to your order.

Open to any items from the following shop categories

28mm scifi buildings
10mm wargame buildings
28mm fantasy buildings
28mm scifi alien buildings
Battle boards / city fight
World war theme

The £100 Does not count shipping cost

https://www.wargame-model-mods.co.uk/ourshop/cat_883228-Buildings.html

There is also currently a sale on left of Tubular building kits from the last kickstarter £5 off every kit

https://www.wargame-model-mods.co.uk/ourshop/cat_1135246-Sale.html

July giveaway

Free work station with orders of £75. Choose one from this category

https://www.wargame-model-mods.co.uk/ourshop/cat_781920-PaintModel-Work-stations-station.html

Make your order and then email me and let me know which version you would like.

Open to orders containing products from this list

Buildings
Paint stand – storage and racks
Wargaming model storage
Scenic bases

https://www.wargame-model-mods.co.uk/

Various kits are getting pictures revamped a few below

Tech center





Tech post

New Kickstarter launching tomorrow. Will run through September.

Aimed at AOS, 40k, Killteam, infinity, Necromundra and many more.

With three distinct themes and a large kickstarter only building



More info to follow tomorrow

Follow me on facebook or Kickstarter

https://www.facebook.com/wargamemodelmods

https://www.kickstarter.com/profile/wargame-model-mods/created

Brand new Kickstarter from Wargame-model-mods


The Undercity


Running through September


Double your play area with 6 large sturdy tower.

Link them together and add buildings to make a unique tabletop.


Three distinct themes

Medieval

Gothic

Scifi


Check out the Kickstarter exclusive cathedral


https://www.kickstarter.com/projects/wargame-model-mods/the-under-city

Thats a really coolidea. Nice work.

The Undercity Kickstarter is live

https://www.kickstarter.com/projects/wargame-model-mods/the-under-city

This is a small article detailing the gothic theme from it.

The gothic Undercity consists of several different platform types and heights.

The platforms are accessed in several different ways, these include ladders, steps and bridges.

The towers each support a double walkway that can connect to the different size octagonal platforms.

The walkways and platforms have standardized attachment points for ladders, steps, bridges, barriers and much more






The small and medium octagonal platform stack and then sit at the same height as the lower and upper walkways.



A couple of diagonal bridges are included in the sets, they can fit between platforms that are fitted at 90 degree to each other on the towers.



When the towers are spaced at 30cms then one platform will fit in the middle which is then connected to the towers via the small bridges.

The same distance can also be covered with the large bridges.





There are several different sized ladders included that will reach up to the various level of the platforms and walkways, they slot into the attachment points.





The sets can make up loads of different variations and can be different each time you set it up.

These sets can currently be pledged for on Kickstarter

https://www.kickstarter.com/projects/wargame-model-mods/the-under-city

Kickstarter exclusive cathedral

https://www.kickstarter.com/projects/wargame-model-mods/the-under-city




This is the cathedral from the Undercity kickstarter currently running. It is only available until the end of the kickstarter.




You can remove the roof to gain access to a large 60x30 cm play area. Inside there is a balcony with access via doors to the outside balconies.




The towers, side walkways and buttresses are all removable so can be set up in different configurations.
















The rear has a courtyard with access via the cathedral or single door in the middle



Detailed interior, featuring a etched floor and arches



The cathedral packs away inside itself



A look at the cathedral with out the buttresses and mini bunkers





You can pledge for the cahtedral on its own or with the extra items such as the buttresses and courtyard, more info found on the kickstarter page

https://www.kickstarter.com/projects/wargame-model-mods/the-under-city

Final weekend of the undercity kickstarter

https://www.kickstarter.com/projects/wargame-model-mods/the-under-city








The Under City is a new gaming system by Wargame-model-mods, it can double your play area and add a new dimension to your games. The set up provides you with a new upper play area supported above your current board using several towers, with your existing board acting as the lower play area.

These towers are very strong with a lattice structure and external cladding, they have large bases making them stable.

I have designed three complete versions for a wide range of games. A medieval / fantasy board, a grim dark / Gothic theme and a scifi / futuristic design, allowing these to be used with a large range of games..

This system is perfect for games such as, 40k, infinity, kill team, necromuda, AOS and other 28mm games.



The kickstarter also has a exclusive cathedral which will not be available after it finishes

New Kickstarter launching on 31st August.


Dynamic buildings

a new one sounds great. I'm 80% done assembling my undercity and really liking it quite a bit

Gamingdog wrote:
a new one sounds great. I'm 80% done assembling my undercity and really liking it quite a bit

im glad you like it, new onw is live now, adding a post shortly about it


Automatically Appended Next Post:


A brand new Kickstarter launched today from Wargame-model-mods

The Kickstarter is based on kits with movement. To start off there are 15 new buildings, all different and all with their own theme.

The kickstarter also features the massive Rotary miner

https://www.kickstarter.com/projects/wargame-model-mods/dynamic-wargame-buildings








Buildings

A few of the buildings are shown below.

The Kickstarter has indavidual videos of each building showing them working and a 360 view of them









These kists are jammed full of details and little bits such as control pannels, chair and tools.








A look at some of the the moving parts.

The mechanical parts are 3d printed and use metal bearing where appropiate to make the kits reliable and smooth.








https://www.kickstarter.com/projects/wargame-model-mods/dynamic-wargame-buildings

Pledged before you'd even edited the post.

The rotary miner looks awesome, bit big for my needs but it would be awesome necromunda/ash wastes terrain

Looking at the Picaxe processor it seems like there are boards you can get to play sounds, which seems like a great upgrade. I'm already thinking of the possibility of wiring multiple buildings into a control panel so they can all be powered/controlled together.

Another piece of stunning work, you consistently push the envelope on what wargaming terrain is capable of

Charax wrote:
Pledged before you'd even edited the post.

The rotary miner looks awesome, bit big for my needs but it would be awesome necromunda/ash wastes terrain

Looking at the Picaxe processor it seems like there are boards you can get to play sounds, which seems like a great upgrade. I'm already thinking of the possibility of wiring multiple buildings into a control panel so they can all be powered/controlled together.

Another piece of stunning work, you consistently push the envelope on what wargaming terrain is capable of

Hello.

Thank you. i am happy you like it.

you certinaly could wire them all up can have them controlled togeather by one unit, i had considered sound but i desided not too go there, if there is enough poeple who ask about it i can relook at it.

Comms dish

Dynamic buildings kickstarter


Comms dish from the Dynamic buildings Kickstarter.

Featuring a rotating dish, The dish will rotate and adjust for best signal, it will then transmit, while transmitting the blue lights are on, once complete the red ones come on.











The building is packed with details, including access ladders and two mini sataliette dishes.







A close up on the dish. It has a frame on the rear which holds all of the pannel in place.






The two boxes that hold the walkway up contain the battery pack and the microchip that controlls the building. The small platform on the far side has the motor in it.


This kit is currerently avalible on kickstarter, you can get it on its own or with other kits.


https://www.kickstarter.com/projects/wargame-model-mods/dynamic-wargame-buildings

I got several buildings from the first kickstarter, and can vouch for the quality, excellent stuff.

 Slinky wrote:
I got several buildings from the first kickstarter, and can vouch for the quality, excellent stuff.

Thank you very much


Automatically Appended Next Post:
New building for the Dynamic buildings Kickstarter.

https://www.kickstarter.com/projects/wargame-model-mods/dynamic-wargame-buildings

This is the assault drill launcher a new building that has been added as a stretch goal.

It is the first building that uses two motors.

One to turn the building left or right and the other to rotate the drill head.

A video will be added to the kickstarter showing it working and a 360 view.

It will be unlocked at £12000.















The first stretch goals are getting unlocked so far we have a Landing platform for the miner and a series of platforms to attach to the lower walkway.

The first freebie has also been unlocked. The freebie is a choice of one of the scatter set add-ons see the campaign for more details

The Dynamic buildings kickstarter is currently running. Offering a series of buildings with motor driven parts.

They are driven by a small preprogramed processor board and are battery powered.
Everything you need is included in the kits, including the electronics and plastic parts. No soldering is needed all the electronics use screw terminal blocks

https://www.kickstarter.com/projects/wargame-model-mods/dynamic-wargame-buildings

Grinder - Dynamic buildings


This is the grinder, the building features 4 reciprocating grinder at the front of the building. These can be setup as staggered or in sync.


The building is packed with details and has access to the top floor.

https://www.kickstarter.com/projects/wargame-model-mods/dynamic-wargame-buildings

More stretch goals and a look at the Pump house building.

https://www.kickstarter.com/projects/wargame-model-mods/dynamic-wargame-buildings

Over the weekend we unlocked 3 more stretch goals including the first new building kit.



The first of the mini 3d prints sets are these little warning cones, they come in a set of 5


A set of four tall flood lights has also been unlocked


Lastly the first of the new building kits has been unlocked, this is the Assault drill launcher.

A video running a demo program of this building has been added to the main campaign see the building section.

Below are the new stretch goals that i have added today.


A small skip and contents great to add flair to your buildings.


The heat sync is a small kit with a rotating fan. You can add this to the roof or walls of other kits or use is as scatter terrain.


This is the recon drone the next freebie.


The pump house is a large building kit.

The base of the kit has four large pistons joined to a rotating central gear that powers the pistons.

A video of it working can bee seen on the kickstarter page.














https://www.kickstarter.com/projects/wargame-model-mods/dynamic-wargame-buildings

Maze of the dead deal and website offer and a look at the tool press.


https://www.kickstarter.com/projects/wargame-model-mods/dynamic-wargame-buildings


The tool press from the Dynamic buildings kickstarter.

This kit features three moving parts to simulate a press, each one moves in and out about a conveyor belt. These can be set up in sync or staggered.
















Maze of the dead deal bundle available on the currently running Kickstarter. £21 off and includes £50 worth of add-ons for free.

Get one of my 4x4 ft Maze of the dead’s from a previous Kickstarter. Choose any of the mazes from my website. The Nuclear vaults is £10 more. And select £50 worth of add-ons for free from the same shop category.

Choose the Maze of the dead deal pledge.

https://www.wargame-model-mods.co.uk/ourshop/cat_1227096-Maze-of-the-dead.html


Another offer available is the 10% off website kit pledge.

Order anything from my website with the pledge at 10% off

These all look amazing!

 lethalerror wrote:

Charax wrote:
Pledged before you'd even edited the post.

The rotary miner looks awesome, bit big for my needs but it would be awesome necromunda/ash wastes terrain

Looking at the Picaxe processor it seems like there are boards you can get to play sounds, which seems like a great upgrade. I'm already thinking of the possibility of wiring multiple buildings into a control panel so they can all be powered/controlled together.

Another piece of stunning work, you consistently push the envelope on what wargaming terrain is capable of

Hello.

Thank you. i am happy you like it.

you certinaly could wire them all up can have them controlled togeather by one unit, i had considered sound but i desided not too go there, if there is enough poeple who ask about it i can relook at it.

Count me in as interested in sound stuff.

Dynamic buildings.

The mining outpost.


https://www.kickstarter.com/projects/wargame-model-mods/dynamic-wargame-buildings


The mining outpost is a rework of the old promethium rig featuring a brand new platform lay out and adding motorized parts that this Kickstarter is all about.



It is a large platform that stands on four tall legs and is a great centre piece.

Each leg has two walkways with ladder access, the bottom walkways are also
connected with a bridge.

The top platform has two rooms with internal access via removable rooves.

Two lifts that allow access from the floor.Each lift supports a platform, one a
landing pad and the other, a cargo area with crane.

The centre has a large building with the mining tower in the centre, this houses the
top part of the rotating drill, theunderneath of the platform has the
drill head which also rotates.

The kits has lots of little details such as transport carts, railing etc.



















https://www.kickstarter.com/projects/wargame-model-mods/dynamic-wargame-buildings


New stretch goal building.


Tectonic wave generator.











Automatically Appended Next Post:

Nurglitch wrote:
These all look amazing!

Thank you


Automatically Appended Next Post:

IanVanCheese wrote:

 lethalerror wrote:

Charax wrote:
Pledged before you'd even edited the post.

The rotary miner looks awesome, bit big for my needs but it would be awesome necromunda/ash wastes terrain

Looking at the Picaxe processor it seems like there are boards you can get to play sounds, which seems like a great upgrade. I'm already thinking of the possibility of wiring multiple buildings into a control panel so they can all be powered/controlled together.

Another piece of stunning work, you consistently push the envelope on what wargaming terrain is capable of

Hello.

Thank you. i am happy you like it.

you certinaly could wire them all up can have them controlled togeather by one unit, i had considered sound but i desided not too go there, if there is enough poeple who ask about it i can relook at it.

Count me in as interested in sound stuff.

Thanks for letting me know, i think it will be a project for the future

This is the Ammo factory and the Reactor cooler

https://www.kickstarter.com/projects/wargame-model-mods/dynamic-wargame-buildings
The conveyor at the front and the rear missile drum rotate at intervals with internal lighting to give the impression of manufacturing inside.



The four vents on the sides open and close to vent heat.



The kickstarter also features some mini 3D printed kits to add some extra detail to your buildings

https://www.kickstarter.com/projects/wargame-model-mods/dynamic-wargame-buildings

Automatically Appended Next Post:


Last few hours of the new Kickstarter

The Kickstarter is based on kits with movement. To start off there are 15 new buildings, all different and all with their own theme.

The kickstarter also features the massive Rotary miner

https://www.kickstarter.com/projects/wargame-model-mods/dynamic-wargame-buildings








Buildings

A few of the buildings are shown below.

The Kickstarter has indavidual videos of each building showing them working and a 360 view of them









These kists are jammed full of details and little bits such as control pannels, chair and tools.








A look at some of the the moving parts.

The mechanical parts are 3d printed and use metal bearing where appropiate to make the kits reliable and smooth.








https://www.kickstarter.com/projects/wargame-model-mods/dynamic-wargame-buildings

https://www.kickstarter.com/projects/wargame-model-mods/hab-block-delta

A new city range of terrain designed for easy stacking, set up and unique layouts. The kits use strong 5mm magnets to attach the different sections, rooves and addons together to make cities of any size. Each building has a series of magnets in the top and bottom. Using these magnetsyou can quickly snap the buildings onto roof panels and then onto other buildings. The edge of each roof has further magnets allowing for the attachment of various items such as railings, bridges and much more. Everything you need to build these kits is included.

Good luck with the Kickstarter! I'm more of a fan of your interactive pieces with LEDs and Motors, but I'm sure this will be super popular