Switch Theme:

Share on facebook Share on Twitter Submit to Reddit  [RSS] 

What Forgeworld model would you most like to see as a plastic GW kit? @ 2012/03/17 22:51:55


Post by: AnUnearthlyChilde


As the title asks, what Forgeworld model would you like to see as a GW plastic Kit?

With the improvements in plastic in recent times, and them churning out some pretty nice plastic kits (Tervigon, Thundertusk, Black dragon and araknarock to name but a few), I was curious to know what everyone's opinion was. My choice would have to be either the Tyranid Heirophant or Harridan. As the way they have begun to model the kits being assembled, a lot of the weight and fragility problems with those two models would be severely reduced. Plus I'd be less afraid to convert it if it was plastic too


What would your choice be?


What Forgeworld model would you most like to see as a plastic GW kit? @ 2012/03/17 22:52:46


Post by: Samus_aran115


That new decimator chaos engine


What Forgeworld model would you most like to see as a plastic GW kit? @ 2012/03/17 22:56:54


Post by: Brother SRM


Samus_aran115 wrote:That new decimator chaos engine

That's a little quick out the gate, isn't it?

I'd love to see a plastic Warhound. GW has proven they can do plastics in large scale with the Stompa and Baneblade, and it would be a pretty iconic kit. Failing that, a Thunderbolt fighter. I love the look of both it and the Marauder, but I can't feel safe putting a heavy resin model on a flight stand!


What Forgeworld model would you most like to see as a plastic GW kit? @ 2012/03/17 23:04:06


Post by: Coolyo294


The Contemptor Dreadnought.


What Forgeworld model would you most like to see as a plastic GW kit? @ 2012/03/17 23:10:02


Post by: AnUnearthlyChilde


Brother SRM wrote:
Samus_aran115 wrote:That new decimator chaos engine

That's a little quick out the gate, isn't it?

I'd love to see a plastic Warhound. GW has proven they can do plastics in large scale with the Stompa and Baneblade, and it would be a pretty iconic kit. Failing that, a Thunderbolt fighter. I love the look of both it and the Marauder, but I can't feel safe putting a heavy resin model on a flight stand!


I think you can probably count the Thunderbolt being done for the next guard codex as it seems everyone is getting a flyer of some sort. And it'd be pretty damn sweet to see a plastic Warhound... but, unfortunately I wouldnt hold my breath :(


What Forgeworld model would you most like to see as a plastic GW kit? @ 2012/03/18 00:06:05


Post by: -Loki-


AnUnearthlyChilde wrote:I think you can probably count the Thunderbolt being done for the next guard codex as it seems everyone is getting a flyer of some sort.


For one, Guard have their flier, the Valkyrie. The Guard codex started the flyer craze with it.

Secondly, the Thunderbolt really shouldn't be in the Guard codex because it's Imperial Navy, not Guard.

I'd really like to see a Warhound. It's one of those kits people would buy just to build and paint. I know I would.


What Forgeworld model would you most like to see as a plastic GW kit? @ 2012/03/18 00:10:27


Post by: danp164


The FW Tau battle suits, GOD they look better than the stock GW ones...


What Forgeworld model would you most like to see as a plastic GW kit? @ 2012/03/18 00:10:57


Post by: Crazy_Carnifex


I want to see a hierophant.

Probably not going to happen, though.


What Forgeworld model would you most like to see as a plastic GW kit? @ 2012/03/18 00:12:54


Post by: -Loki-


A Heirophant would annoy me, mostly because I'm halfway through building one. Though not having to construct a special flying base for one would be nice.


What Forgeworld model would you most like to see as a plastic GW kit? @ 2012/03/18 00:18:42


Post by: AnUnearthlyChilde


-Loki- wrote:A Heirophant would annoy me, mostly because I'm halfway through building one. Though not having to construct a special flying base for one would be nice.


Hence my reason for wanting it in plastic lols


What Forgeworld model would you most like to see as a plastic GW kit? @ 2012/03/18 00:22:04


Post by: Insurgency Walker


Will I get banned for suggesting a Thunderhawk?


What Forgeworld model would you most like to see as a plastic GW kit? @ 2012/03/18 00:24:36


Post by: AnUnearthlyChilde


Insurgency Walker wrote:Will I get banned for suggesting a Thunderhawk?


Haha nope, Its been on my wishlist since it first came out in metal in the early 90's (although I think you could only win it, but not sure on that)


What Forgeworld model would you most like to see as a plastic GW kit? @ 2012/03/18 00:30:58


Post by: H.B.M.C.


Plastic Warhound, Thunderhawk, Contemptor, and any of the Tyranid things.


What Forgeworld model would you most like to see as a plastic GW kit? @ 2012/03/18 00:32:41


Post by: Knights-Abhorrent


AnUnearthlyChilde wrote:
Insurgency Walker wrote:Will I get banned for suggesting a Thunderhawk?


Haha nope, Its been on my wishlist since it first came out in metal in the early 90's (although I think you could only win it, but not sure on that)



Nah, the original Thunderhawk saw a limited run of 500 in white metal at £400 a pop. It came with two certificates. One of authenticity and one of ownership and it came in a very nice wooden case that even had a lock and key

For me, it'd have to be the Repressor. I love that model so much... So, so much... fap fap fap fap...


What Forgeworld model would you most like to see as a plastic GW kit? @ 2012/03/18 00:34:04


Post by: Happygrunt


-Loki- wrote:
AnUnearthlyChilde wrote:I think you can probably count the Thunderbolt being done for the next guard codex as it seems everyone is getting a flyer of some sort.


For one, Guard have their flier, the Valkyrie. The Guard codex started the flyer craze with it.

Secondly, the Thunderbolt really shouldn't be in the Guard codex because it's Imperial Navy, not Guard.

I'd really like to see a Warhound. It's one of those kits people would buy just to build and paint. I know I would.


Um, sorry to bust in, but Valkyries are also Navy...

Honestly, the contemptor. Because there is little why it isn't in normal games anyway.

That, or those armor mark kits to be mixed into the GW plastic kits.


What Forgeworld model would you most like to see as a plastic GW kit? @ 2012/03/18 00:41:21


Post by: Nagashek


Tau Orca. If not the Orca itself then the same lines brought down in scale.


What Forgeworld model would you most like to see as a plastic GW kit? @ 2012/03/18 01:16:19


Post by: -Loki-


Happygrunt wrote:
-Loki- wrote:
AnUnearthlyChilde wrote:I think you can probably count the Thunderbolt being done for the next guard codex as it seems everyone is getting a flyer of some sort.


For one, Guard have their flier, the Valkyrie. The Guard codex started the flyer craze with it.

Secondly, the Thunderbolt really shouldn't be in the Guard codex because it's Imperial Navy, not Guard.

I'd really like to see a Warhound. It's one of those kits people would buy just to build and paint. I know I would.


Um, sorry to bust in, but Valkyries are also Navy...


With the noticeable difference that Valkyrie pilots follow the orders of the senior officer of the regiment they are assigned to. They are effectively a unit of the regiment they're assigned to until the completion of the mission. Thing like Thunderbolts are all Imperial Navy, not seconded to regiments.


What Forgeworld model would you most like to see as a plastic GW kit? @ 2012/03/18 01:17:56


Post by: LunaHound


Eldar Titans


What Forgeworld model would you most like to see as a plastic GW kit? @ 2012/03/18 01:26:19


Post by: Happygrunt


-Loki- wrote:
Happygrunt wrote:
-Loki- wrote:
AnUnearthlyChilde wrote:I think you can probably count the Thunderbolt being done for the next guard codex as it seems everyone is getting a flyer of some sort.


For one, Guard have their flier, the Valkyrie. The Guard codex started the flyer craze with it.

Secondly, the Thunderbolt really shouldn't be in the Guard codex because it's Imperial Navy, not Guard.

I'd really like to see a Warhound. It's one of those kits people would buy just to build and paint. I know I would.


Um, sorry to bust in, but Valkyries are also Navy...


With the noticeable difference that Valkyrie pilots follow the orders of the senior officer of the regiment they are assigned to. They are effectively a unit of the regiment they're assigned to until the completion of the mission. Thing like Thunderbolts are all Imperial Navy, not seconded to regiments.


Yes, that is true. The way I think of it is the Guard armies are under the command of a Lord General, who would be in overall command of an army group. Navy would answer to him, so he could order for regiments to have direct naval support. But, at the end of the day, Guard have the fliers they need.


What Forgeworld model would you most like to see as a plastic GW kit? @ 2012/03/12 23:08:58


Post by: Engine of War


The Hydra.

All IG Artillary (Medusa, Collosus etc)

Vendettas.

preety much anything not in plastic in the codex.


What Forgeworld model would you most like to see as a plastic GW kit? @ 2012/03/18 01:45:50


Post by: Avatar 720


Eldar Hornet, so I wouldn't have to pay Heavy Support prices for a Fast Attack unit.


What Forgeworld model would you most like to see as a plastic GW kit? @ 2012/03/18 02:00:33


Post by: Ignatius


Imperial Guard Hydra.


What Forgeworld model would you most like to see as a plastic GW kit? @ 2012/03/18 02:04:50


Post by: Emerett


Every dreadnought. It's not like they wouldn't sell like crazy.


What Forgeworld model would you most like to see as a plastic GW kit? @ 2012/03/18 02:19:41


Post by: Rabtorian


Either DKoK, Elysians or Warhound.


What Forgeworld model would you most like to see as a plastic GW kit? @ 2012/03/18 02:28:59


Post by: rubicant99


I love the Necron Tomb Stalker model, shame it didn't make it into the codex like Trygons did for nids. Also the Landspeeder Tempest is is a lovely model.


What Forgeworld model would you most like to see as a plastic GW kit? @ 2012/06/10 06:12:26


Post by: Insurgency Walker


Avatar 720 wrote:Eldar Hornet, so I wouldn't have to pay Heavy Support prices for a Fast Attack unit.



I wonder if that might happen, the tau, oh crap...I forgot its name, oh yea the tau piranha made the cross. The Hornet would be an easy plastic kit.

Hello GW
Give us plastic crack, shaped like Eldar hornets!


What Forgeworld model would you most like to see as a plastic GW kit? @ 2012/03/18 04:03:38


Post by: Lobokai


Insurgency Walker wrote:Will I get banned for suggesting a Thunderhawk?


+1... me too. We have plastic Baneblades after all


What Forgeworld model would you most like to see as a plastic GW kit? @ 2012/03/18 04:27:42


Post by: -Loki-


Insurgency Walker wrote:
Avatar 720 wrote:Eldar Hornet, so I wouldn't have to pay Heavy Support prices for a Fast Attack unit.



I wonder if that might happen, the tau, oh crap...I forgot its name, oh yea the tau piranha made the cross. The Hornet would be an easy plastic kit.

Hello GW
Give us plastic crack, shaped like Eldar hornets!


IIRC, GW said they wouldn't be pilfering units from FW anymore. This was some time after the Tyranid codex.


What Forgeworld model would you most like to see as a plastic GW kit? @ 2012/03/18 12:09:16


Post by: AnUnearthlyChilde


-Loki- wrote:
Insurgency Walker wrote:
Avatar 720 wrote:Eldar Hornet, so I wouldn't have to pay Heavy Support prices for a Fast Attack unit.



I wonder if that might happen, the tau, oh crap...I forgot its name, oh yea the tau piranha made the cross. The Hornet would be an easy plastic kit.

Hello GW
Give us plastic crack, shaped like Eldar hornets!


IIRC, GW said they wouldn't be pilfering units from FW anymore. This was some time after the Tyranid codex.


That doesn't mean they won't, as I was under the assumption that GW bought out Forgeworld, so they have the rights to... But also it doesnt stop us wishing


What Forgeworld model would you most like to see as a plastic GW kit? @ 2012/03/18 12:46:12


Post by: blood reaper


Plague Marines. Those sculpts would make a boss kit.


What Forgeworld model would you most like to see as a plastic GW kit? @ 2012/03/18 12:47:12


Post by: AnUnearthlyChilde


Oh also, I'd like to see the Tyranid warrior wings make it into the warrior box sets... or for them to make shrike models... either way I'd be happy.


What Forgeworld model would you most like to see as a plastic GW kit? @ 2012/03/18 12:55:35


Post by: CthuluIsSpy


necron pylon. And those scarabs.

Ork Megadreads.


What Forgeworld model would you most like to see as a plastic GW kit? @ 2012/03/18 13:08:33


Post by: jonolikespie


As awesome as it would be I don't think they'll ever do titans or thunderhawks in plastic.
A kit for the Macharius superheavies similar to the shadowsword kit (1 chaises that can be built as like 6 different tanks with the main difference simply being the turrent used) would be awesome though.


What Forgeworld model would you most like to see as a plastic GW kit? @ 2012/03/18 13:08:48


Post by: CadianXV


Vulture Gunship. It would be easy to do, and the hybrid kit is already fantastic- plastic would just make it easier to mod!


What Forgeworld model would you most like to see as a plastic GW kit? @ 2012/03/18 18:07:31


Post by: Brother SRM


AnUnearthlyChilde wrote:
That doesn't mean they won't, as I was under the assumption that GW bought out Forgeworld, so they have the rights to... But also it doesnt stop us wishing

GW owns Forgeworld and always has. They just don't want to remake FW kits very often because it doesn't promote sales as much. If GW came out with a plastic Tau fighter that wasn't the Barracuda or what have you, then they'll still be able to sell Forgeworld's kit in addition to their own. If they made a plastic Barracuda, then nobody would by the FW one anymore. Just an example.


What Forgeworld model would you most like to see as a plastic GW kit? @ 2012/03/18 18:15:55


Post by: Dabansheedude


Hmm yes a hornet yes to maybe a wasp or a the lynxs look cool oh just all eldar kits for the survival of the craftworlds!


What Forgeworld model would you most like to see as a plastic GW kit? @ 2012/03/18 18:38:48


Post by: AnUnearthlyChilde


Brother SRM wrote:
AnUnearthlyChilde wrote:
That doesn't mean they won't, as I was under the assumption that GW bought out Forgeworld, so they have the rights to... But also it doesnt stop us wishing

GW owns Forgeworld and always has. They just don't want to remake FW kits very often because it doesn't promote sales as much. If GW came out with a plastic Tau fighter that wasn't the Barracuda or what have you, then they'll still be able to sell Forgeworld's kit in addition to their own. If they made a plastic Barracuda, then nobody would by the FW one anymore. Just an example.


when GW has made a plastic variant of a FW model, generally they have either adapted the FW stuff, or taken it off of production. that way they don't have crontradicting products.


What Forgeworld model would you most like to see as a plastic GW kit? @ 2012/03/18 18:49:22


Post by: Kanluwen


AnUnearthlyChilde wrote:
-Loki- wrote:
Insurgency Walker wrote:
Avatar 720 wrote:Eldar Hornet, so I wouldn't have to pay Heavy Support prices for a Fast Attack unit.



I wonder if that might happen, the tau, oh crap...I forgot its name, oh yea the tau piranha made the cross. The Hornet would be an easy plastic kit.

Hello GW
Give us plastic crack, shaped like Eldar hornets!


IIRC, GW said they wouldn't be pilfering units from FW anymore. This was some time after the Tyranid codex.


That doesn't mean they won't, as I was under the assumption that GW bought out Forgeworld, so they have the rights to... But also it doesnt stop us wishing

The "Forge World" you see today is not the same "Forge World" which operated under license at the same time as Armorcast.

That Forge World is long since gone. This Forge World is directly under the control of Games Workshop, much like Black Library.


What Forgeworld model would you most like to see as a plastic GW kit? @ 2012/03/18 19:04:05


Post by: Brother SRM


AnUnearthlyChilde wrote:
when GW has made a plastic variant of a FW model, generally they have either adapted the FW stuff, or taken it off of production. that way they don't have crontradicting products.

That's part of my point. Now they only have one kit to sell as opposed to two. Less kits can often mean less profit.


What Forgeworld model would you most like to see as a plastic GW kit? @ 2012/03/18 19:14:05


Post by: AnUnearthlyChilde


Brother SRM wrote:
AnUnearthlyChilde wrote:
when GW has made a plastic variant of a FW model, generally they have either adapted the FW stuff, or taken it off of production. that way they don't have crontradicting products.

That's part of my point. Now they only have one kit to sell as opposed to two. Less kits can often mean less profit.


still doesnt stop all of us fangirls/fanboys wishing and dreaming

GAMESWORKSHOP, GIVE ME GIANT PLASTIC TYRANIDS OF NOMMY DEVOURYNESS NAO!!!


What Forgeworld model would you most like to see as a plastic GW kit? @ 2012/03/18 19:19:03


Post by: Agen


I'd love to see some/any of the Titans done by GW


What Forgeworld model would you most like to see as a plastic GW kit? @ 2012/03/18 19:42:14


Post by: Deadshot


Thunderhawk or Caetus Assault Ram.


What Forgeworld model would you most like to see as a plastic GW kit? @ 2012/03/18 19:56:34


Post by: Valkyrie


I know I'm going against the general craze here, but I wouldn't want to see plastic Warhounds or Thunderhawks. People who pay upwards of £300 (myself included) would be a bit miffed if suddenly everyone can have one for 1/5 of the price. I bet everyone who owned a Baneblade felt the same way when they came out in plastic: they have a bit of a prestige thing going if you know what I mean.

In terms of what I would like to see in plastic, I'd have to go for Contemptor Dreadnoughts.


What Forgeworld model would you most like to see as a plastic GW kit? @ 2012/03/18 20:07:40


Post by: tobi-nid-guy


Bio Titan!!!!! !!!!

Although ld be very frightned of the tiny legs.


What Forgeworld model would you most like to see as a plastic GW kit? @ 2012/03/18 20:36:10


Post by: AnUnearthlyChilde


Valkyrie wrote:I know I'm going against the general craze here, but I wouldn't want to see plastic Warhounds or Thunderhawks. People who pay upwards of £300 (myself included) would be a bit miffed if suddenly everyone can have one for 1/5 of the price. I bet everyone who owned a Baneblade felt the same way when they came out in plastic: they have a bit of a prestige thing going if you know what I mean.


true, but I started this thread due to my constant panic of breaking my Forgeworld goodies... which just doesn't happen to gw plastics from experience. In fact I'm more likely to hurt myself on the plastic (which has happened many times, curse you ungors and Tyranid MC's). I want a Heirophant bio-titan... but, I'm wary of it as I'm afraid to snap a leg :(


What Forgeworld model would you most like to see as a plastic GW kit? @ 2012/03/18 21:05:53


Post by: Valkyrie


AnUnearthlyChilde wrote:
Valkyrie wrote:I know I'm going against the general craze here, but I wouldn't want to see plastic Warhounds or Thunderhawks. People who pay upwards of £300 (myself included) would be a bit miffed if suddenly everyone can have one for 1/5 of the price. I bet everyone who owned a Baneblade felt the same way when they came out in plastic: they have a bit of a prestige thing going if you know what I mean.


true, but I started this thread due to my constant panic of breaking my Forgeworld goodies... which just doesn't happen to gw plastics from experience. In fact I'm more likely to hurt myself on the plastic (which has happened many times, curse you ungors and Tyranid MC's). I want a Heirophant bio-titan... but, I'm wary of it as I'm afraid to snap a leg :(


Well I know how you feel in that regard:



Broken Titans would make anyone cry, plastic or resin...


What Forgeworld model would you most like to see as a plastic GW kit? @ 2012/03/18 21:26:04


Post by: AnUnearthlyChilde


Valkyrie wrote:
AnUnearthlyChilde wrote:
Valkyrie wrote:I know I'm going against the general craze here, but I wouldn't want to see plastic Warhounds or Thunderhawks. People who pay upwards of £300 (myself included) would be a bit miffed if suddenly everyone can have one for 1/5 of the price. I bet everyone who owned a Baneblade felt the same way when they came out in plastic: they have a bit of a prestige thing going if you know what I mean.


true, but I started this thread due to my constant panic of breaking my Forgeworld goodies... which just doesn't happen to gw plastics from experience. In fact I'm more likely to hurt myself on the plastic (which has happened many times, curse you ungors and Tyranid MC's). I want a Heirophant bio-titan... but, I'm wary of it as I'm afraid to snap a leg :(


Well I know how you feel in that regard:



Broken Titans would make anyone cry, plastic or resin...


OH.MY.GOD I feel your pain...


What Forgeworld model would you most like to see as a plastic GW kit? @ 2012/03/18 21:40:59


Post by: SDFarsight


Practically everything they do of Tau.

If I had to pick one, I'd say Tetras.


What Forgeworld model would you most like to see as a plastic GW kit? @ 2012/03/18 21:49:39


Post by: Trondheim


I would really, really like to see the Red Scorpions or the Contemtor dreadnaugth alongside the Chaplain Dread being made into plastic kits. I would also pay enourmus amounts for armourd sentinels in boxes that allowes you to build 3 at a time


What Forgeworld model would you most like to see as a plastic GW kit? @ 2012/03/18 21:57:05


Post by: dajobe


DKOK troops, not even the artillery and everything, just the basic troops...


What Forgeworld model would you most like to see as a plastic GW kit? @ 2012/03/18 22:50:01


Post by: Emerett


blood reaper wrote:Plague Marines. Those sculpts would make a boss kit.


That sure would be nice, eh.


What Forgeworld model would you most like to see as a plastic GW kit? @ 2012/03/18 22:51:51


Post by: sennacherib


Warhound titan please. or else i would love to see the Death Korp released properly in plastics. those models are amazing.


What Forgeworld model would you most like to see as a plastic GW kit? @ 2012/03/18 23:03:36


Post by: -Loki-


AnUnearthlyChilde wrote:
Brother SRM wrote:
AnUnearthlyChilde wrote:
when GW has made a plastic variant of a FW model, generally they have either adapted the FW stuff, or taken it off of production. that way they don't have crontradicting products.

That's part of my point. Now they only have one kit to sell as opposed to two. Less kits can often mean less profit.


still doesnt stop all of us fangirls/fanboys wishing and dreaming

GAMESWORKSHOP, GIVE ME GIANT PLASTIC TYRANIDS OF NOMMY DEVOURYNESS NAO!!!


Regarding Tyranids, I'd rather see new stuff, or at least new versions of old Epic stuff. Lets see things like the Dactylis, Cerebore, Viragon, Malefactor, etc come back. I really don't care if they never do wings in the Warrior box (expecially since the FW wings are amazing), not do I want to see a plastic Malanthrope or Heriophant. I want to see new stuff. If they want to give us an Apocalypse model, give us a Dominatrix.


What Forgeworld model would you most like to see as a plastic GW kit? @ 2012/03/18 23:06:39


Post by: AnUnearthlyChilde


-Loki- wrote:
AnUnearthlyChilde wrote:
Brother SRM wrote:
AnUnearthlyChilde wrote:
when GW has made a plastic variant of a FW model, generally they have either adapted the FW stuff, or taken it off of production. that way they don't have crontradicting products.

That's part of my point. Now they only have one kit to sell as opposed to two. Less kits can often mean less profit.


still doesnt stop all of us fangirls/fanboys wishing and dreaming

GAMESWORKSHOP, GIVE ME GIANT PLASTIC TYRANIDS OF NOMMY DEVOURYNESS NAO!!!


Regarding Tyranids, I'd rather see new stuff, or at least new versions of old Epic stuff. Lets see things like the Dactylis, Cerebore, Viragon, Malefactor, etc come back. I really don't care if they never do wings in the Warrior box (expecially since the FW wings are amazing), not do I want to see a plastic Malanthrope or Heriophant. I want to see new stuff. If they want to give us an Apocalypse model, give us a Dominatrix.


I'd also like to see Hierodules with weapon options rather than the one version we currently have. Also don't forget the awesome Dominatrix ^_^


Automatically Appended Next Post:
also... I HOPE SOMEONE FROM HEAD OFFICE IS READING THIS AND TAKES NOTE!!!


What Forgeworld model would you most like to see as a plastic GW kit? @ 2012/03/18 23:09:20


Post by: -Loki-


AnUnearthlyChilde wrote:I'd also like to see Hierodules with weapon options rather than the one version we currently have.


Maybe go look at the page again, because there's 2 . One with a pair of biocannons and scything talons, one with two pairs of scything talons and an acid spray. They're basically weapon swapped Heirodules, like a Carnifex with four scything talons and a carnifex with four devourers.


What Forgeworld model would you most like to see as a plastic GW kit? @ 2012/03/18 23:11:33


Post by: AnUnearthlyChilde


-Loki- wrote:
AnUnearthlyChilde wrote:I'd also like to see Hierodules with weapon options rather than the one version we currently have.


Maybe go look at the page again, because there's 2 . One with a pair of biocannons and scything talons, one with two pairs of scything talons and an acid spray. They're basically weapon swapped Heirodules, like a Carnifex with four scything talons and a carnifex with four devourers.


I meant to say Hierophant :/


What Forgeworld model would you most like to see as a plastic GW kit? @ 2012/03/18 23:23:09


Post by: Great White


The Tau Manta. I'm surprised I'm the first one to say it.


What Forgeworld model would you most like to see as a plastic GW kit? @ 2012/03/18 23:50:43


Post by: Brother SRM


Great White wrote:The Tau Manta. I'm surprised I'm the first one to say it.

I think that's because not many people are looking for a plastic coffee table.


What Forgeworld model would you most like to see as a plastic GW kit? @ 2012/03/18 23:53:00


Post by: Avatar 720


Brother SRM wrote:
Great White wrote:The Tau Manta. I'm surprised I'm the first one to say it.

I think that's because not many people are looking for a plastic coffee table.


It's not just a plastic coffee table, it's a plastic coffee table that holds my entire Tau army, cups, a kettle + running water supply, and biscuits, with room to spare.


What Forgeworld model would you most like to see as a plastic GW kit? @ 2012/03/18 23:56:22


Post by: -Loki-


The fact that a Manta is basically an army case as well is hilarious.


What Forgeworld model would you most like to see as a plastic GW kit? @ 2012/03/18 23:58:24


Post by: CT GAMER


Insurgency Walker wrote:Will I get banned for suggesting a Thunderhawk?


This.


What Forgeworld model would you most like to see as a plastic GW kit? @ 2012/03/19 00:21:28


Post by: Emerett


-Loki- wrote:The fact that a Manta is basically an army case as well is hilarious.


GW ever making that is an insane pipedream.



What Forgeworld model would you most like to see as a plastic GW kit? @ 2012/03/19 02:02:13


Post by: mayfist


Elysians for sure !



What Forgeworld model would you most like to see as a plastic GW kit? @ 2012/03/19 02:06:07


Post by: Smitty


Let there be Krieg!


What Forgeworld model would you most like to see as a plastic GW kit? @ 2012/03/19 02:22:01


Post by: Anfauglir


Death Korps for sure!


What Forgeworld model would you most like to see as a plastic GW kit? @ 2012/03/19 02:29:38


Post by: mayfist


Smitty wrote:Let there be Krieg!


Anfauglir wrote:Death Korps for sure!



Yes ! those too ! But i'm more in love with Elysians ..


What Forgeworld model would you most like to see as a plastic GW kit? @ 2012/03/19 02:47:47


Post by: -Loki-


Plastic Elysians would be dreamy.


What Forgeworld model would you most like to see as a plastic GW kit? @ 2012/03/19 02:51:40


Post by: The Mad Tanker


Medusa
Hydra
Vendetta
Stygies VIII Pattern Vanquisher Turrets (They look so much better)
Leman Russ Annihilator


What Forgeworld model would you most like to see as a plastic GW kit? @ 2012/03/19 02:51:45


Post by: Crazyterran


Contemptors replacing normal Dreadnoughts, since the Contemptors look like they can actually walk.

Thunderhawks.

Warhound Titans.


What Forgeworld model would you most like to see as a plastic GW kit? @ 2012/03/19 03:18:02


Post by: Avro


A kit for xv9 hazard suits would be most welcomed


What Forgeworld model would you most like to see as a plastic GW kit? @ 2012/03/19 04:20:04


Post by: Brotherjulian


MkIIB land raider, in a double kit as Imperial or Chaos with Chaos-specific weapon options (Mk1 plasma, Reaper autocannons, etc)


What Forgeworld model would you most like to see as a plastic GW kit? @ 2012/03/19 05:53:20


Post by: FeindusMaximus


Warhound or Reaver Titan


What Forgeworld model would you most like to see as a plastic GW kit? @ 2012/03/19 06:20:13


Post by: candy.man


I’m going to second Samus_aran115’s suggestion for the Decimator Chaos Engine. Seriously, this thing is one of the best CSM chaos kits (that isn’t a direct copy of an existing IoM kit) that I’ve seen in ages. A multipart plastic Decimator kit would be cool and fill a gap within the current CSM miniatures line (the gap being unique Chaos vehicle outside of the Defiler).

I think some of the Forgeworld terrain (specifically bunkers/barricades, Zone Mortalis tiles, etc) could also do with plastics kits. At the moment, the price (as well as the durability of resin) makes the terrain kits a little unfeasible to purchase.


What Forgeworld model would you most like to see as a plastic GW kit? @ 2012/03/19 09:13:55


Post by: Shinglepants


Ork Squiggoth!.......Please GW?


What Forgeworld model would you most like to see as a plastic GW kit? @ 2012/03/19 14:06:25


Post by: AnUnearthlyChilde


Shinglepants wrote:Ork Squiggoth!.......Please GW?


Makes sense seeming they give it rules to allow it in 40k instead of being Apocalypse only.


What Forgeworld model would you most like to see as a plastic GW kit? @ 2012/03/19 14:18:06


Post by: kronk


Warhound titan.

Thunder Hawk.

Chaos Dreadnoughts that don't suck.


What Forgeworld model would you most like to see as a plastic GW kit? @ 2012/03/19 14:24:35


Post by: Gitsplitta


Warhound... definitely.

Squiggoth... also definitely.


What Forgeworld model would you most like to see as a plastic GW kit? @ 2012/03/19 17:32:06


Post by: orz192


Death Korps of Krieg!


What Forgeworld model would you most like to see as a plastic GW kit? @ 2012/03/19 18:11:58


Post by: Jadenim


I second the vote for Tau Tetras, such a nice model and a useful codex entry.

Although proper, poseable Battlesuits would save me a huge amount of time, effort and swearing...


What Forgeworld model would you most like to see as a plastic GW kit? @ 2012/03/19 19:09:07


Post by: captain collius


CONTEMPTOR DREADS HAHAHA YES ...... wait you mean this is just a wish list .....frack

but seriously
warhounds
contemptor
landspeeder tempests
dkok
elysians
hornets
corsairs
dual kit eldar heavy tank
revenant
tau landers
squiggoth
tomb spyder
all belong the question is how do you pick?


What Forgeworld model would you most like to see as a plastic GW kit? @ 2012/03/19 20:07:30


Post by: cvtuttle


Thunderhawk - hands down.


What Forgeworld model would you most like to see as a plastic GW kit? @ 2012/03/19 20:50:57


Post by: Alsath


Avatar of Khaine! The GW one is tiny and consequently a little strange looking. I also like the Keeper of Secrets. If we're talking stuff that has no model in the GW line, then I'd say the new Chaos dread too.


What Forgeworld model would you most like to see as a plastic GW kit? @ 2012/03/19 21:59:40


Post by: AnUnearthlyChilde


captain collius wrote:CONTEMPTOR DREADS HAHAHA YES ...... wait you mean this is just a wish list .....frack

but seriously
warhounds
contemptor
landspeeder tempests
dkok
elysians
hornets
corsairs
dual kit eldar heavy tank
revenant
tau landers
squiggoth
tomb spyder
all belong the question is how do you pick?


Easily... Tyranids. ALL OF THEM. EVERY LAST ONE!!!


What Forgeworld model would you most like to see as a plastic GW kit? @ 2012/03/20 00:37:34


Post by: DPBellathrom


the keeper of secrets with some different arm and head options would make me very, very happy xD


What Forgeworld model would you most like to see as a plastic GW kit? @ 2012/03/20 04:19:08


Post by: AnUnearthlyChilde


DPBellathrom wrote:the keeper of secrets with some different arm and head options would make me very, very happy xD


That'd be quite nice to see tbh.


What Forgeworld model would you most like to see as a plastic GW kit? @ 2012/03/20 04:42:49


Post by: Great White


Some kroot knarlocs and stuff would be nice.


What Forgeworld model would you most like to see as a plastic GW kit? @ 2012/03/20 09:13:41


Post by: Cerebrium


Tau Tetras. Useful, cheap, and look cool as hell.


What Forgeworld model would you most like to see as a plastic GW kit? @ 2012/03/21 17:26:36


Post by: redkeyboard


The Tau Manta. I would love to see that as a plastic kit. It would be cool. Maybe not easy to put togeather due to warping ect. But would be amazing ti see as a plastic set.


What Forgeworld model would you most like to see as a plastic GW kit? @ 2012/03/21 17:40:27


Post by: Skriker


Full plastic chaos renegades would be a nice thing to see. Gets pricey having to buy the cadian units *and* the conversion pieces separate from each other...Also most of the chaos daemon engines would be cool to see in plastic, though I already have most of them...wouldn't mind adding another nurgle plague hulk or another khorne blood slaughterer.

Skriker


What Forgeworld model would you most like to see as a plastic GW kit? @ 2012/03/23 02:23:05


Post by: AnUnearthlyChilde


Having said that... I'd also like to see some terrain in plastic/ lighter less breakable materials. BRING BACK THE NID TERRAIN!!!


What Forgeworld model would you most like to see as a plastic GW kit? @ 2012/03/23 20:57:18


Post by: wolf13


Ever since I found out about them, i had always wanted a Warp hunter and Night spinner for my eldar. I had them in progress using the VDR back in 3rd when I left the game. Coming back to find the Nightspinner in plastic and the warp hunter at forgeworld, heck yeah! I am a skimmer freak, so put me down for a plastic warp hunter or two and a squadron of hornets. I'll throw shadow spectres on my wishlist as well as corsairs, they look like fun.

I also would not deny the dark ones a chance to expand their model range so add in the reaper and tantalas.

I don't play nids, but I also can't say I'd be sorry to see more big bugs in plastic.


What Forgeworld model would you most like to see as a plastic GW kit? @ 2012/03/23 20:59:59


Post by: AnUnearthlyChilde


wolf13 wrote:Ever since I found out about them, i had always wanted a Warp hunter and Night spinner for my eldar. I had them in progress using the VDR back in 3rd when I left the game. Coming back to find the Nightspinner in plastic and the warp hunter at forgeworld, heck yeah! I am a skimmer freak, so put me down for a plastic warp hunter or two and a squadron of hornets. I'll throw shadow spectres on my wishlist as well as corsairs, they look like fun.

I also would not deny the dark ones a chance to expand their model range so add in the reaper and tantalas.

I don't play nids, but I also can't say I'd be sorry to see more big bugs in plastic.


I love the fact that the Warp hunter, Tantalas and Reaper all have 40K rules not just for Apoc as some FW units are. hence my love for the big floating balls of goo that are the Malanthropes ^_^


What Forgeworld model would you most like to see as a plastic GW kit? @ 2012/03/24 05:58:13


Post by: mxwllmdr


Childe, I would have to say Warlord........




Yes, I know there is no FW Warlord kit. That is my point.........







Guess I will have to build my own.....


What Forgeworld model would you most like to see as a plastic GW kit? @ 2012/03/24 06:33:32


Post by: Zathras


I'd have to say the Tomb Stalker would be my choice. If it came out in plastic I'd buy three of the buggers.


What Forgeworld model would you most like to see as a plastic GW kit? @ 2012/03/24 12:16:42


Post by: AnUnearthlyChilde


mxwllmdr wrote:Childe, I would have to say Warlord........




Yes, I know there is no FW Warlord kit. That is my point.........







Guess I will have to build my own.....


Lol I'd have thought you already had


What Forgeworld model would you most like to see as a plastic GW kit? @ 2012/03/24 14:19:24


Post by: Henners91


Nob Bikers.

Medusa Artillery.

Heresy armour marks


What Forgeworld model would you most like to see as a plastic GW kit? @ 2012/03/24 16:13:22


Post by: AnUnearthlyChilde


Henners91 wrote:Nob Bikers.

Medusa Artillery.

Heresy armour marks


after the fortune I spent on the pre heresy armour, I dont want to see it in plastic


What Forgeworld model would you most like to see as a plastic GW kit? @ 2012/03/24 18:19:36


Post by: Ensis Ferrae


mxwllmdr wrote:Childe, I would have to say Warlord........




Yes, I know there is no FW Warlord kit. That is my point.........







Guess I will have to build my own.....



While you're at it, we may as well ask GW to make Emperor Titans... especially if they made a "titans of note" sprue that included the necessary bits to make Dies Irae (and obviously a loyalist version)


What Forgeworld model would you most like to see as a plastic GW kit? @ 2012/03/24 18:21:49


Post by: AegisGrimm


I want GE to skip the FW route entirely and offer a plastic Knight for Imperial Forces to go up against Ork Stompas.

Sell it with two sets of each arm, so you can pick which pattern you want to field and just plug them in.

I honestly don't want any more huge models that just sit around like a brick at the edge of the table, FW or otherwise.


What Forgeworld model would you most like to see as a plastic GW kit? @ 2012/03/24 19:00:42


Post by: CthuluIsSpy


AegisGrimm wrote:I want GE to skip the FW route entirely and offer a plastic Knight for Imperial Forces to go up against Ork Stompas.

Sell it with two sets of each arm, so you can pick which pattern you want to field and just plug them in.

I honestly don't want any more huge models that just sit around like a brick at the edge of the table, FW or otherwise.


Aren't knights smaller than stompas though? I thought they were the same size as dreadknights.


What Forgeworld model would you most like to see as a plastic GW kit? @ 2012/03/24 19:13:43


Post by: mxwllmdr


Knights are smaller than stompas but can deal with them effectively if porperly loaded out.

@Ensis, I think yhat if they did an warlord than an emperor/emperator could be a seperate conversion kit as the are basically the same chassis with mainly aesthetic differences. Weapons and such, except isn't there a version of the warlord that can deploy dreadnaughts from its legs?


What Forgeworld model would you most like to see as a plastic GW kit? @ 2012/03/24 19:16:43


Post by: AnUnearthlyChilde


mxwllmdr wrote:Knights are smaller than stompas but can deal with them effectively if porperly loaded out.

@Ensis, I think yhat if they did an warlord than an emperor/emperator could be a seperate conversion kit as the are basically the same chassis with mainly aesthetic differences. Weapons and such, except isn't there a version of the warlord that can deploy dreadnaughts from its legs?


The Emperor class can house a company of Guard (100 troops) IIRC


What Forgeworld model would you most like to see as a plastic GW kit? @ 2012/03/24 19:26:42


Post by: CthuluIsSpy


Aren't emperor titans twice the size of warlords?

The height of titans from smallest to largest IIRC goes

Knights (if they count) --> Warhounds --> Reavers --> Warlord --> emperor --> Whatever comes next


What Forgeworld model would you most like to see as a plastic GW kit? @ 2012/03/24 19:32:22


Post by: AnUnearthlyChilde


CthuluIsSpy wrote:Aren't emperor titans twice the size of warlords?

The height of titans from smallest to largest IIRC goes

Knights (if they count) --> Warhounds --> Reavers --> Warlord --> emperor --> Whatever comes next


Emperor class is the largest class of Titan, with two variants: The Imperator & The Warmonger. Both can house a company of Guard.

Knight class titan's are smallest > http://wh40k.lexicanum.com/wiki/Knight#.T24fsGFFrvo


What Forgeworld model would you most like to see as a plastic GW kit? @ 2012/03/24 19:36:52


Post by: CthuluIsSpy


AnUnearthlyChilde wrote:
CthuluIsSpy wrote:Aren't emperor titans twice the size of warlords?

The height of titans from smallest to largest IIRC goes

Knights (if they count) --> Warhounds --> Reavers --> Warlord --> emperor --> Whatever comes next


Emperor class is the largest class of Titan, with two variants: The Imperator & The Warmonger. Both can house a company of Guard.

Knight class titan's are smallest > http://wh40k.lexicanum.com/wiki/Knight#.T24fsGFFrvo


Oh wow, those knights look awesome. Why the hell haven't FW made any of them?
I mean, they already have warhounds, what's stopping them from making a variant that's even smaller.


What Forgeworld model would you most like to see as a plastic GW kit? @ 2012/03/24 19:39:38


Post by: AnUnearthlyChilde


CthuluIsSpy wrote:
AnUnearthlyChilde wrote:
CthuluIsSpy wrote:Aren't emperor titans twice the size of warlords?

The height of titans from smallest to largest IIRC goes

Knights (if they count) --> Warhounds --> Reavers --> Warlord --> emperor --> Whatever comes next


Emperor class is the largest class of Titan, with two variants: The Imperator & The Warmonger. Both can house a company of Guard.

Knight class titan's are smallest > http://wh40k.lexicanum.com/wiki/Knight#.T24fsGFFrvo


Oh wow, those knights look awesome. Why the hell haven't FW made any of them?
I mean, they already have warhounds, what's stopping them from making a variant that's even smaller.


Well I think if they continue the pre-heresy variant route then they will. but, coming from a current timeline point of view, they are incedibly rare, most being relics of an age where the adeptus can no longer afford the time to maintain them as battle ready.


What Forgeworld model would you most like to see as a plastic GW kit? @ 2012/03/24 19:42:16


Post by: CthuluIsSpy


AnUnearthlyChilde wrote:
CthuluIsSpy wrote:
AnUnearthlyChilde wrote:
CthuluIsSpy wrote:Aren't emperor titans twice the size of warlords?

The height of titans from smallest to largest IIRC goes

Knights (if they count) --> Warhounds --> Reavers --> Warlord --> emperor --> Whatever comes next


Emperor class is the largest class of Titan, with two variants: The Imperator & The Warmonger. Both can house a company of Guard.

Knight class titan's are smallest > http://wh40k.lexicanum.com/wiki/Knight#.T24fsGFFrvo


Oh wow, those knights look awesome. Why the hell haven't FW made any of them?
I mean, they already have warhounds, what's stopping them from making a variant that's even smaller.


Well I think if they continue the pre-heresy variant route then they will. but, coming from a current timeline point of view, they are incedibly rare, most being relics of an age where the adeptus can no longer afford the time to maintain them as battle ready.


Well, that's backward. Shouldn't the smallest and cheapest variant be more numerous and widespread than the larger variants?


What Forgeworld model would you most like to see as a plastic GW kit? @ 2012/03/24 19:49:45


Post by: AnUnearthlyChilde


CthuluIsSpy wrote:
AnUnearthlyChilde wrote:
CthuluIsSpy wrote:
AnUnearthlyChilde wrote:
CthuluIsSpy wrote:Aren't emperor titans twice the size of warlords?

The height of titans from smallest to largest IIRC goes

Knights (if they count) --> Warhounds --> Reavers --> Warlord --> emperor --> Whatever comes next


Emperor class is the largest class of Titan, with two variants: The Imperator & The Warmonger. Both can house a company of Guard.

Knight class titan's are smallest > http://wh40k.lexicanum.com/wiki/Knight#.T24fsGFFrvo


Oh wow, those knights look awesome. Why the hell haven't FW made any of them?
I mean, they already have warhounds, what's stopping them from making a variant that's even smaller.


Well I think if they continue the pre-heresy variant route then they will. but, coming from a current timeline point of view, they are incedibly rare, most being relics of an age where the adeptus can no longer afford the time to maintain them as battle ready.


Well, that's backward. Shouldn't the smallest and cheapest variant be more numerous and widespread than the larger variants?


If you read the link, they were built on feudal worlds, during the age of strife... when taken back into the imperial fold, the tech priests that would have overseen their being built, will have been taken back into the mechanicus, plus a lot would have been lost in the great crusade due to the fighting.


Automatically Appended Next Post:
Oh and as a side note, I just worked out the hight of an emperor class titan in 40k. 77.7inches.

going on the image supplied in its data sheet, it is 55 times the size of the infantry figure, and as a SM is 38mm tall, that gives 1976mm = 77.7inch and change... I was considering building one... but I don't have that kind of space


What Forgeworld model would you most like to see as a plastic GW kit? @ 2012/03/24 19:54:48


Post by: CthuluIsSpy


I read it as the Knights being brought to the Knight Worlds, indicating that the Admech knew how to build them.

"The most important innovation that the Tech-priests brought to the Knight Worlds were the fighting machines called Knights"



What Forgeworld model would you most like to see as a plastic GW kit? @ 2012/03/24 20:00:48


Post by: AnUnearthlyChilde


CthuluIsSpy wrote:I read it as the Knights being brought to the Knight Worlds, indicating that the Admech knew how to build them.

"The most important innovation that the Tech-priests brought to the Knight Worlds were the fighting machines called Knights"



IIRC they brought the information to build them, not pre constructed ones. But the Crusades still put paid to the vast majority of them, leading to a rapid decline in their use and more reverence for them. hence why we almost never hear of them in the fluff.


What Forgeworld model would you most like to see as a plastic GW kit? @ 2012/03/24 20:02:51


Post by: CthuluIsSpy


Well I guess it would make sense that most of them, including knowledge of their construction, would have been lost during the great crusade.


What Forgeworld model would you most like to see as a plastic GW kit? @ 2012/03/24 20:06:11


Post by: AnUnearthlyChilde


As I say though, if they continue with their Pre-heresy/great-crusade range of models, I wouldn't be surprised to see a Knight-Titan made tbh.

I'd be buying one, thats for certain!


What Forgeworld model would you most like to see as a plastic GW kit? @ 2012/03/24 20:10:05


Post by: TH3FALL3N


Defo some IG drop troops. That would convince me to collect guard


What Forgeworld model would you most like to see as a plastic GW kit? @ 2012/03/24 20:18:59


Post by: AegisGrimm


Aren't knights smaller than stompas though? I thought they were the same size as dreadknights.


They are smaller than Stompas, but larger than Dreadnights. Think of them as being about 8-9 inches tall. On a paladin, one arm is in majority, a battle-cannon the scale of a Leman Russ', and the other is a titan close-combat weapon, I think with a twin-linked heavy bolter under-slung (think giant chainsword)

Basically imagine their head being about the same size as a Sentinel cockpit pod. So the rest of the body would be scaled accordingly.


What Forgeworld model would you most like to see as a plastic GW kit? @ 2012/03/24 20:26:46


Post by: AnUnearthlyChilde


It'd certainly be interesting to see a modernization of the epic models


What Forgeworld model would you most like to see as a plastic GW kit? @ 2012/03/24 20:35:30


Post by: BlapBlapBlap


Rabtorian wrote:Either DKoK, Elysians or Warhound.


I would hate for DKOK to come out in plastic. It would just mean that every single guard player would collect them, and it would ruin special feeling you get when you collect a DKOK army.

Similar for Elysians. Plus, I just hate the models.

Warhound seems OK.

But the best plastics that GW could do are do all generic HQs in plastic. Vostroyans and Steel Legion would be amazing, and probably would make me start an IG army. Finish off dreadnoughts. And for the love of god, at least aim to offer EVERY SINGLE MODEL IN EVERY CODEX. SERIOUSLY.


What Forgeworld model would you most like to see as a plastic GW kit? @ 2012/03/26 14:19:24


Post by: Skriker


AnUnearthlyChilde wrote:Oh and as a side note, I just worked out the hight of an emperor class titan in 40k. 77.7inches.

going on the image supplied in its data sheet, it is 55 times the size of the infantry figure, and as a SM is 38mm tall, that gives 1976mm = 77.7inch and change... I was considering building one... but I don't have that kind of space


To use it you'd have to play on the floor unless you had cathedral ceilings in your gaming room, or the table was only a foot and a half off the floor....

Skriker


What Forgeworld model would you most like to see as a plastic GW kit? @ 2012/03/26 14:23:24


Post by: AnUnearthlyChilde


Skriker wrote:
AnUnearthlyChilde wrote:Oh and as a side note, I just worked out the hight of an emperor class titan in 40k. 77.7inches.

going on the image supplied in its data sheet, it is 55 times the size of the infantry figure, and as a SM is 38mm tall, that gives 1976mm = 77.7inch and change... I was considering building one... but I don't have that kind of space


To use it you'd have to play on the floor unless you had cathedral ceilings in your gaming room, or the table was only a foot and a half off the floor....

Skriker


I think it's safer to just not build the damned thing lols


What Forgeworld model would you most like to see as a plastic GW kit? @ 2012/03/26 14:47:02


Post by: mxwllmdr


Skriker wrote:
AnUnearthlyChilde wrote:Oh and as a side note, I just worked out the hight of an emperor class titan in 40k. 77.7inches.

going on the image supplied in its data sheet, it is 55 times the size of the infantry figure, and as a SM is 38mm tall, that gives 1976mm = 77.7inch and change... I was considering building one... but I don't have that kind of space


To use it you'd have to play on the floor unless you had cathedral ceilings in your gaming room, or the table was only a foot and a half off the floor....

Skriker



That's accurate, however, that's real scale scaled to the mini. In 40k scale, where whether or not it ACTUALLY holds the number of models it's supposed to is apparantly immaterial, they wouldn't be that big. The Warhound titan comes in at 10-11 inches, as built by FW. The Emperator is roughly four to four and a half times that height making it roughly 40-45 inches....

That's 40k scale. You should check out the Blackadders BoLS Warlord Titan thread for a more detailed discussion on Warlord size. Basically they have brought it down to 24 inches for a warlord, 2.5 times a warhound. An Emperor/Emperator class wouldn't stand 6.5 feet, more along the lines of four, maybe 4.5 depending upon how the Fortress on top is built....


What Forgeworld model would you most like to see as a plastic GW kit? @ 2012/03/26 15:05:17


Post by: AnUnearthlyChilde


mxwllmdr wrote:
Skriker wrote:
AnUnearthlyChilde wrote:Oh and as a side note, I just worked out the hight of an emperor class titan in 40k. 77.7inches.

going on the image supplied in its data sheet, it is 55 times the size of the infantry figure, and as a SM is 38mm tall, that gives 1976mm = 77.7inch and change... I was considering building one... but I don't have that kind of space


To use it you'd have to play on the floor unless you had cathedral ceilings in your gaming room, or the table was only a foot and a half off the floor....

Skriker



That's accurate, however, that's real scale scaled to the mini. In 40k scale, where whether or not it ACTUALLY holds the number of models it's supposed to is apparantly immaterial, they wouldn't be that big. The Warhound titan comes in at 10-11 inches, as built by FW. The Emperator is roughly four to four and a half times that height making it roughly 40-45 inches....

That's 40k scale. You should check out the Blackadders BoLS Warlord Titan thread for a more detailed discussion on Warlord size. Basically they have brought it down to 24 inches for a warlord, 2.5 times a warhound. An Emperor/Emperator class wouldn't stand 6.5 feet, more along the lines of four, maybe 4.5 depending upon how the Fortress on top is built....


Don't suppose you could link me up?


What Forgeworld model would you most like to see as a plastic GW kit? @ 2012/03/26 15:18:56


Post by: y0disisray


The ones I would like to see are all the greater daemons.


What Forgeworld model would you most like to see as a plastic GW kit? @ 2012/03/26 15:46:45


Post by: mxwllmdr


Sure, always proud to bump this dude....


http://www.dakkadakka.com/dakkaforum/posts/list/372703.page


EDIT: Sorry forgot the most relevant one.....

http://www.dakkadakka.com/dakkaforum/posts/list/300245.page


What Forgeworld model would you most like to see as a plastic GW kit? @ 2012/03/26 15:49:05


Post by: KhornateCake


Gotta be the grot tanks


What Forgeworld model would you most like to see as a plastic GW kit? @ 2012/03/26 16:05:13


Post by: CuddlySquig


All of them. lol.

Seriously though, one of the ork airplanes.


What Forgeworld model would you most like to see as a plastic GW kit? @ 2012/03/26 16:19:25


Post by: Agen


AnUnearthlyChilde wrote:
CthuluIsSpy wrote:Aren't emperor titans twice the size of warlords?

The height of titans from smallest to largest IIRC goes

Knights (if they count) --> Warhounds --> Reavers --> Warlord --> emperor --> Whatever comes next


Emperor class is the largest class of Titan, with two variants: The Imperator & The Warmonger. Both can house a company of Guard.

Knight class titan's are smallest > http://wh40k.lexicanum.com/wiki/Knight#.T24fsGFFrvo


Page doesn't seem to want to load..


What Forgeworld model would you most like to see as a plastic GW kit? @ 2012/03/26 16:31:49


Post by: AnUnearthlyChilde


mxwllmdr wrote:Sure, always proud to bump this dude....


http://www.dakkadakka.com/dakkaforum/posts/list/372703.page


EDIT: Sorry forgot the most relevant one.....

http://www.dakkadakka.com/dakkaforum/posts/list/300245.page


Cheers Max

Agen wrote:
AnUnearthlyChilde wrote:
CthuluIsSpy wrote:Aren't emperor titans twice the size of warlords?

The height of titans from smallest to largest IIRC goes

Knights (if they count) --> Warhounds --> Reavers --> Warlord --> emperor --> Whatever comes next


Emperor class is the largest class of Titan, with two variants: The Imperator & The Warmonger. Both can house a company of Guard.

Knight class titan's are smallest > http://wh40k.lexicanum.com/wiki/Knight#.T24fsGFFrvo


Page doesn't seem to want to load..


Just go to the Lexicanum and search for Knight titan.


What Forgeworld model would you most like to see as a plastic GW kit? @ 2012/03/26 16:35:33


Post by: mxwllmdr


Knights aren't Titans......



LOL....


What Forgeworld model would you most like to see as a plastic GW kit? @ 2012/03/26 16:37:06


Post by: Desert_thunder_heart


Ork fightas.
Dems da fastest things in da sky. Warbosss Towwslamma lovez dem.

DKOK would be nice.
And what about a Manta.


What Forgeworld model would you most like to see as a plastic GW kit? @ 2012/03/26 17:04:42


Post by: AnUnearthlyChilde


mxwllmdr wrote:Knights aren't Titans......



LOL....


*tuts* Picky sod...

Mini-titan-like construct.... eeeeeeeeeesh


What Forgeworld model would you most like to see as a plastic GW kit? @ 2012/03/26 17:32:17


Post by: mxwllmdr


Ooooooh, Dakka no-no.....


You aren't allowed to call some one not from your country by a colloquial name.....



LOL....


What is a sod supposed to be anyway?


What Forgeworld model would you most like to see as a plastic GW kit? @ 2012/03/26 17:55:50


Post by: Buttons


danp164 wrote:The FW Tau battle suits, GOD they look better than the stock GW ones...

I don't even play Tau and I have to say that I agree with danp164. The FW battlesuits are bitchin'.


What Forgeworld model would you most like to see as a plastic GW kit? @ 2012/03/26 19:10:39


Post by: mxwllmdr


Hey, the Tau note, I'd love to see a Manta model....


What Forgeworld model would you most like to see as a plastic GW kit? @ 2012/03/26 20:44:14


Post by: BlapBlapBlap


mxwllmdr wrote:Hey, the Tau note, I'd love to see a Manta model....


But then the only army you could actually buy in your local GW would be Tau. The box would take up about 3 whole shelves...


What Forgeworld model would you most like to see as a plastic GW kit? @ 2012/03/26 20:58:30


Post by: mxwllmdr


Well, yeah, good point....


What Forgeworld model would you most like to see as a plastic GW kit? @ 2012/03/26 21:15:15


Post by: AnUnearthlyChilde


mxwllmdr wrote:Ooooooh, Dakka no-no.....


You aren't allowed to call some one not from your country by a colloquial name.....



LOL....


What is a sod supposed to be anyway?



As far as I was aware it was a damp torn lump of turf


What Forgeworld model would you most like to see as a plastic GW kit? @ 2012/03/26 21:24:45


Post by: mxwllmdr


So I am turf? Hey, that ain't the lowest I could go so YAY ME!!!!!!


What Forgeworld model would you most like to see as a plastic GW kit? @ 2012/03/26 21:26:09


Post by: King Pariah




OH HELL YES!!!


What Forgeworld model would you most like to see as a plastic GW kit? @ 2012/03/26 21:28:01


Post by: mxwllmdr


Yes, he is bad @$$. That would be nice.....


What Forgeworld model would you most like to see as a plastic GW kit? @ 2012/03/26 21:29:51


Post by: MasticatorDeelux


Their templar storm shields. Beautiful bits.


What Forgeworld model would you most like to see as a plastic GW kit? @ 2012/03/26 22:05:31


Post by: AnUnearthlyChilde


King Pariah wrote:

OH HELL YES!!!


Whenever I see this, it makes me want to do my best possible starscream impression


What Forgeworld model would you most like to see as a plastic GW kit? @ 2012/03/27 01:06:16


Post by: The Lost Autarch


I'm gonna try to be as realistic as I can be, so no "WANT ALL THE TITANS!" I'd love for the FW Eldar Avatar to be made into a plastic kit.