Looks great all painted up! It makes everything blend together better and should be an impressive sight on the battlefield.

Nice terrain too!

The metallic weathering / heat effect / etc is amazing. I really like that model a lot. Eventually I'm going to get my Death Guard whittled down to the point that I can concentrate on making a Plaguelord Super Heavy. I know where I'll be turning for the bitz.

great work, machinator + whoever painted that!
keep it up!

So when is this Ultramarine next generation Fellblade going to be made? HMMM

Silent Observant wrote:So when is this Ultramarine next generation Fellblade going to be made? HMMM

Unfortunately Fellblades didn't make it into Roboute's little textbook...

Dysartes wrote:

Silent Observant wrote:So when is this Ultramarine next generation Fellblade going to be made? HMMM

Unfortunately Fellblades didn't make it into Roboute's little textbook...

Well maybe it wasnt in the Codex Astartes. The Fellblade was fielded by every legion except maybe the white scars.

I would have thought white scars would of had a stormlord type one- light weaponry, lots of transport space.

This is freaking amazing.

White Scars would have an enormous armoured Hovercraft.

Anvildude wrote:White Scars would have an enormous armoured Hovercraft.

God yes

or a MASSIVE bike

Bikes technically fit in superheavy transport space, right?

Superheavy armoured hovercraft, with a massive assault ramp where a full squad or two of Marine Bikers can come roaring out, defended by 8 twinlinked Heavy Bolters mounts.

I gotta hand it too you. Those are some of the nastiest of the nasty Superheavy i have ever seen. Eagerly awaiting the Deathgaurd and the Ultramarines.

anvildude wrote:Superheavy armoured hovercraft, with a massive assault ramp where a full squad or two of Marine Bikers can come roaring out, defended by 8 twinlinked Heavy Bolters mounts.

so a fast mving super-heavy with light weaponry and a large transport capacity?

shrike wrote:I would have thought white scars would of had a stormlord type one- light weaponry, lots of transport space.

just hovering? I would have thought that would be too much like a thunderhawk- light weapons, frontal assault ramp, large transport capacity...

here's what I came up with quickly, using the amazing power of MS paint:


frontal assault ramp, 8 heavy bolters, vulcan mega-bolter, etc.

shrike wrote:I would have thought white scars would of had a stormlord type one- light weaponry, lots of transport space.

Don't worry guys, I do have another super heavy variant coming out that is much like what is described above and according to my fluff it was very popular with the Space Wolves, White Scars, and Worldeaters....

Machinator wrote:

shrike wrote:I would have thought white scars would of had a stormlord type one- light weaponry, lots of transport space.

Don't worry guys, I do have another super heavy variant coming out that is much like what is described above and according to my fluff it was very popular with the Space Wolves, White Scars, and Worldeaters....

You are still continuing your Fellblade Project right?

Silent Observant wrote:

Machinator wrote:

shrike wrote:I would have thought white scars would of had a stormlord type one- light weaponry, lots of transport space.

Don't worry guys, I do have another super heavy variant coming out that is much like what is described above and according to my fluff it was very popular with the Space Wolves, White Scars, and Worldeaters....

You are still continuing your Fellblade Project right?

Oh yes, that project will continue into the forseeable future

I look forward to posting my version of a GK fellblade once I get onto the project, should be great (I brought the mega tank set from your Ebay shop) so much work to be done to get it in the right place though...

Aye, I'm also buying a fellblade (irombreaker/warmaul) and painting it in the livery of my beloved raven guard in late march... gonna be so sweet...

Knightley wrote:I look forward to posting my version of a GK fellblade once I get onto the project, should be great (I brought the mega tank set from your Ebay shop) so much work to be done to get it in the right place though...

shrike wrote:Aye, I'm also buying a fellblade (irombreaker/warmaul) and painting it in the livery of my beloved raven guard in late march... gonna be so sweet...

I can't wait to see them Also, if anyone else out there wants to show off their Fellblades feel free to post pics here. I'd like this to be a communal thread for the lovers of everything Fellblade related in addition to seeing what I'm working on.

That being said, I really wish I would have done a better job documenting the build of the Iron Breaker. I plan to build another one sometime this year for a client and will do a much better job of showing the whole process. Building a Warmaul variant is quite a bit of work but the results are all worth it

Can we have another tease on the Ultramarine Mk2?

I was just wondering what happened to the Dark Angel variant? Have you finished that beauty yet? I need one of them.

^the DA on is definatly my favorite, so show it to me or you gets the hose again!

Bloody fracking hell...I have just read this blog front to back and I must say, you are absolutely AMAZING! I am working on a 100% converted army right now, and it's projects like this that inspire me to keep working. I cannot wait to see what you come up with next. Godspeed, sir, Godspeed.

Silent Observant wrote:Can we have another tease on the Ultramarine Mk2?

It will be blue

Actually the Ultramarine Fellblade (and the GK for that matter) maybe part of a larger project I'm contemplating. Once I hammer out the details and get started you guys will be the first to know.

gobbledog wrote:I was just wondering what happened to the Dark Angel variant? Have you finished that beauty yet? I need one of them.

Unfortunately not :( Last year I was asked to do a number of commissions each of which took longer then I anticipated, but I'm almost caught up now. There is still a new resin piece or two I want to add to the DA Fellblade and I need to make the masters and get them cast up first. Once that is done I can get back to working on that beast.

Odd One Out wrote:Bloody fracking hell...I have just read this blog front to back and I must say, you are absolutely AMAZING! I am working on a 100% converted army right now, and it's projects like this that inspire me to keep working. I cannot wait to see what you come up with next. Godspeed, sir, Godspeed.

Thank you very much. I'm always glad to be an inspiration to people

Glad to know the DA fellblade is not forgotten, looking forward to seeing it completed. It should incorporate a teleport homer to assist the Deathwing assault...

me:

Machinator wrote:
Don't worry guys, I do have another super heavy variant coming out that is much like what is described above and according to my fluff it was very popular with the Space Wolves, White Scars, and Worldeaters....

... So the main cannon fires axes at the enemy?

Nowlan wrote:

Machinator wrote:
Don't worry guys, I do have another super heavy variant coming out that is much like what is described above and according to my fluff it was very popular with the Space Wolves, White Scars, and Worldeaters....

... So the main cannon fires axes at the enemy?

Nope, it fires top know hair styles at them.

Nowlan wrote:

Machinator wrote:
Don't worry guys, I do have another super heavy variant coming out that is much like what is described above and according to my fluff it was very popular with the Space Wolves, White Scars, and Worldeaters....

... So the main cannon fires axes at the enemy?

A 40k SH Goblinhewer?

Nowlan wrote:

Machinator wrote:
Don't worry guys, I do have another super heavy variant coming out that is much like what is described above and according to my fluff it was very popular with the Space Wolves, White Scars, and Worldeaters....

... So the main cannon fires axes at the enemy?

Better then that! It will have a twin linked angry, axe wielding space marine launcher with optional frenzon dispenser!

If the World Eaters used it. It must superheavy armour and giant Chainblades on the side!

Instead of having treads, it has 2 massive chainswords for propulsion.

Maybe after your project, you could construct a Super-Heavy tank for this one particular SM chapter...

Angry Marines

sluggaslugga wrote:Maybe after your project, you could construct a Super-Heavy tank for this one particular SM chapter...

Angry Marines

YES. IT MUST BE DONE.

sluggaslugga wrote:Maybe after your project, you could construct a Super-Heavy tank for this one particular SM chapter...

Angry Marines

That would be beyond amazing!


This thread is just... I just.. MMM. BRAIN OVERLOAD its sooo damn good!!! Amazing work, I cannot wait to see more of it!

Let me get the Dark Angel one done first

yaaaay! wanting to see that one^

Oh man. Angry Marines.

That would be AWESOME!!!

I will patiently wait. I'm not going anywhere

YES!!! +1 FOR ANGRY MARINES!!!

I fear that though it will be hilarious, it will be too much money to spend on a joke and no-one will buy it, so it wouldn't be worth mach's time.
Though if people will buy it, why not?

shrike wrote:I fear that though it will be hilarious, it will be too much money to spend on a joke and no-one will buy it, so it wouldn't be worth mach's time.
Though if people will buy it, why not?

Hey if someone is willing to buy it I'm willing to build it. I already have the main weapon planned out in my head

Does it fire marines?

It should fire smaller tanks that fire marines.
With giant chainswords for tracks.

Nah- it should have treads made out of legs, and each leg has a Power Foot, for POWER STOMPING EVERYTHING.

Your Oppressor tracks would be great for an Angry Marines fellblade.

Some way to give it DCCWs would be kinda funny too, so that it could punch things. I'm not really sure how that would work, rules-wise.

Easily enough. DCCWs just give vehicles Close Combat attacks, meaning they need a Weapon's skill and Strength.

Or, do it like the Ork Wrekkin' Ball- on a roll of something, it hits, and does a Strength Whatever hit.

I was going to suggest giving it an arm for a CCW too/
I've always liked the idea of say, a predator, being able to rplace its side sponsons with fold-out arms. Kind of like giant versions robotic arms on the techmarines, just with a giant chainsword at the end of it, that can attack anyone within say... 3" of the sponson.

Rules wise, I'd say:
Standard sponson mount with WS3, S4, I3, A3
Built in storm bolter or flamer.

Can take following upgrades:
+1 WS
+1 I

Can replace Vehicle Chainsword with:
Twin-Linked Chainsword (+1 attack, re-roll hits)
Vehicle Power Sword (Power weapon)
DCCW (doubles strength, power weapon)

Can replace built-in storm bolter of flamer with:
Heavy Flamer
Heavy Bolter

Don't know about points, but that's what I'd do.

Just have 4 of them on the Angry Marines Fell Blade

No additional attacks- just the one. If you want more choppy, you need to get more sponsons.

Ovion wrote:It should fire smaller tanks that fire marines.
With giant chainswords for tracks.

^ Win.

If I had any space left I'd sig that.

Yeah I was definitely thinking about the Oppressor treads for the tracks

The main armnament would be a twin linked catapult for shooting chain axe wielding space marines with a pair of adamantium boxing gloves on either side mounted on hydraulic rams for close combat.

What do you think?

Machinator wrote:Yeah I was definitely thinking about the Oppressor treads for the tracks

The main armnament would be a twin linked catapult for shooting chain axe wielding space marines with a pair of adamantium boxing gloves on either side mounted on hydraulic rams for close combat.

What do you think?

as long as there's an angry marine sat in the catapult

Those are amazing. I want one!

Your Oppressors may well work, I'd be tempted to say create something to extend them forward, so it can run up to and maul things with them .

Making an Angrinator turret for the top of the sponsons would be good. (Hell, making turrets to outright create an Angrinator would be fun), With the main cannon firing a kind of... mintank that fires angry marines.

Basically the Angrinator barrel with tracks and weapon mount (storm bolter / flamer or something) thats pre-loaded with an angry marine

I'd say make the CC sponsons, but include the option for regular crap (i.e. giant chainsword, giant sword, mount for Dread 'hand', and a giant boxing glove affair). I would buy a CC sponson

how about a boxing glove on the end of one of those scissor-lift style things, like in cartoons?

I like the sound of this a lot. Oppressor treads counting as something like a deffrolla?

I've also toyed around with the idea in my head before of making something like a train pilot/cowcatcher entirely out of chainswords before...maybe something like that?

Of course you guys know it will be a couple of years before I'll be able to get to the Angry Marine Fellblade at the rate I'm going, right?

That said, if someone wanted to give it a try and post updates here I'd be more then willing to give them the parts at a discount to build one. If anyone is interested send me a PM.

shrike wrote:how about a boxing glove on the end of one of those scissor-lift style things, like in cartoons?

That would be freakin' EPIC!

Machinator wrote:Of course you guys know it will be a couple of years before I'll be able to get to the Angry Marine Fellblade at the rate I'm going, right?

That said, if someone wanted to give it a try and post updates here I'd be more then willing to give them the parts at a discount to build one. If anyone is interested send me a PM.

TBH, It'll be a good year or more before I'll be able to afford anything non-xenos, so this would work for me

But hey, if you make the parts to convert the Angry Marines up, I'd buy them

Machinator wrote:Of course you guys know it will be a couple of years before I'll be able to get to the Angry Marine Fellblade at the rate I'm going, right?

That said, if someone wanted to give it a try and post updates here I'd be more then willing to give them the parts at a discount to build one. If anyone is interested send me a PM.

That was the most tempting thing I've read in a long time. Keeping it in mind. Not joking, either.

Well it's been a long time since I've updated this thread but I finally had some free time to work on my own stuff. So I've started work on three new weapons that people have been asking me about for a long time now: The heavy flame thrower/thermal cannon and the plasma cannon. So here we go....

The flamethrower/thermal cannon will actually be sold together in the same kit and will be interchangeable with the weapon mount. The kit will consist of the shrouded mantle, two weapon mounts, and a set each of the flamethrower and thermal cannons.









There still quite a bit of detail work needed such as vents and hoses for the weapon shroud and the igniter under the flame thrower cannon but it's coming along.

Next up is the plasma cannon that will be integral to the Dark Angels Fellblade when I return to working on that beast. I wanted to give the plasma coils more of a caged glass look so I added the ribs in-between. I also added a few design elements from my Tank Dynamos to the plasma cannon nozzle as the two are meant to go together on the model. I also plan to add a new plasma Tank Engine, which will also go on the DA fellblade.







Hopefully I will have these ready to cast in the next couple of weeks.

So until the next update.....

glad to see some more updates! and man is this cannon cool!

Love the Plasma Cannon version - especially as it will enable me to finally field a Stormblade!

Updates yay! The weapons are looking great, can't wait to see more progress on the DA fellblade. At the rate you are going it might just be finished in time for when they get their next update!

Hello,
Good to see you back, now about the SW tank...

Regards,
Carl

Hello

Exellent super heavys. I'm planning to make a fell blade super heavy tank and want to use the plasma version. Cant wait when you update all the fell blade rules for the 6th edition,thanks

Anyone want to guess what this is for?

that look sooooooo cool!

Three guesses. Barrels for some sort of superheavy plasma cannon, Generator device, or the Loading mechanism and breech of a really big gattling cannon.

I don't know but it looks awesome!

I got my Mega Tank kit in over the weekend and can't wait to start on it! Great Product!

Question: I haven't seen any of the energy weapons on the ebay store?

wow, nice work as usual

Stop teasing us! Finish the tank already!

1. If Fellblades are commanded by an IG armored division. will its efficiency falls too?
2. How do you make tank wheels?
3. Do fellblades use 'smooth hexagonoid track piece' instead of standard 'Baneblade' ones?

Anvildude wrote:Three guesses. Barrels for some sort of superheavy plasma cannon, Generator device, or the Loading mechanism and breech of a really big gattling cannon.

You're close on one of them....

SickSix wrote:I don't know but it looks awesome!

I got my Mega Tank kit in over the weekend and can't wait to start on it! Great Product!

Question: I haven't seen any of the energy weapons on the ebay store?

They're coming soon, I have a few releases I plan to group together. Hopefully later this month or early November.

Lone Cat wrote:1. If Fellblades are commanded by an IG armored division. will its efficiency falls too?
2. How do you make tank wheels?
3. Do fellblades use 'smooth hexagonoid track piece' instead of standard 'Baneblade' ones?

1.) If a fellblade was commanded by an IG I'd just treat it the same as a Baneblade or knock it down to BS3 and take off 50 points or so.

2.) Everything I make uses cast resin.

3.) Fellblade and Baneblade can use any kind of track. I like using my Liberator Pattern 1.0s as they give it a different look.

great homage to the ghostbuster's backpack

I'm guessing a generator of some sort...

Really nice work been following this for a while. Giving me some useful ideas for my own (chaos) Fellblade. Would love to get hold of some of these.

 Orinoco wrote:
great homage to the ghostbuster's backpack

Can't unsee. Thanks for that.

With the upcoming Feast of Blade tournament I was asked if I could once again supply a prize and of course I said yes. It's not often I get to build up something cool for a good cause. But what to build?

Well a Fellblade naturally, but not just any Fellblade. It was time to introduce something new. So without further ado, here it is:











Mystery solved! And yes, the Ghostbuster's proton pack actually was in inspiration







So as you can see the Tank Engine 2 (plasma engine) and Nova Cannon (plasma cannon) will soon be new entries into my store. They still need a few tweaks before production but both should be available by the end of the month.

Of course with the release of these components I can perhaps restart a old neglected project just in time for the release of their long awaited codex....

great work, love the generators especially!

Excellent job! The plasma generators and engines came out great. That will be one darn lucky winner!

your Fellblades has more kick @$$ than chuck noris, bruce lee and Batman combined... You make the Mechanicus priests of mars proud sir.

quite amazing!

Needs way more plasma.

..
..
..

Just kidding, it looks AWESOME! Lovely tanks, can't wait to see more.

Lucarikx

 Lucarikx wrote:
Needs way more plasma.

..
..
..

Just kidding, it looks AWESOME! Lovely tanks, can't wait to see more.

Lucarikx

Oh that is coming. A project languishing in the darkness is about to rise....

Oh that is coming. A project languishing in the darkness is about to rise....

Stop teasing us Tom - I'm a treadhead and I need my fix!!!

If and when you finish the DA version, which one do you plan on making next?

Regards, Phil.

Awesome!

Somebodies army is going to get smelted down. Awesome. Been waiting awhile to see one of your new monsters.

Hell yeah,that's a serious looking heavy there.The main turret housing also reminds me of the millenium falcon.
WIN..............

Holy terra, such insane amounts of Dakka o.O
Even the Tau would feel "inadequate" when faced with these things!

"Is your "gun" to small? Being laughed at by the ladies? Well, sell your soul to the Emperor, and you may ride in one of these massive titans one day! Tower over your opponents and you inadequacy!"
Enlist today!"
(Death rate of Space Marine training, 97 %, no garanties applies)

Well I finally have the Nova Cannon and Tank Reactor in production. Check them out!



http://www.ebay.com/itm/Nova-Cannon-/251177549334?pt=Games_US&hash=item3a7b593e16



http://www.ebay.com/itm/Tank-Reactor-/251177548053?pt=Games_US&hash=item3a7b593915

I also have these new parts bundled with my Tank Combo Pack along with a set of Tank Dynamos replacing the Fuel Tanks. I call it the "Nuclear! Tank Combo Pack"

http://www.ebay.com/itm/Nuclear-Tank-Combo-Pack-/251177557301?pt=Games_US&hash=item3a7b595d35

Once I get some cash freed up in the budget, I am definitely going to order these!

I've always wanted a Stormblade, but I never wanted to deal with an all Forge World resin super-heavy!

These are very nice components indeed!

 Machinator wrote:

 Lucarikx wrote:
Needs way more plasma.

..
..
..

Just kidding, it looks AWESOME! Lovely tanks, can't wait to see more.

Lucarikx

Oh that is coming. A project languishing in the darkness is about to rise....

Hurricane pattern plasma guns. Do it NAO.

 Machinator wrote:
With the upcoming Feast of Blade tournament I was asked if I could once again supply a prize and of course I said yes. It's not often I get to build up something cool for a good cause. But what to build?

Well a Fellblade naturally, but not just any Fellblade. It was time to introduce something new. So without further ado, here it is:











Mystery solved! And yes, the Ghostbuster's proton pack actually was in inspiration







So as you can see the Tank Engine 2 (plasma engine) and Nova Cannon (plasma cannon) will soon be new entries into my store. They still need a few tweaks before production but both should be available by the end of the month.

Of course with the release of these components I can perhaps restart a old neglected project just in time for the release of their long awaited codex....

so Mankind did indeed developed Plasma technology to its peak. Tell me about the main Plasma cannon please

As most of you know now Games Workshop and Forge World have released official rules for the Space Marine Fellblade super-heavy tank in the Horus Heresy: Betrayal book. The Fellblade is now canon and it puts the rules and history of my "Fellblades" into a lurch. So time for something new....

After much thought I've decided that the best way for me to proceed would be to throw out the “Fellblade” name and stick with what I original envisioned my super-heavy to be, a predecessor to the Baneblade. They will still go by their variant names but all can be traced back to an original chassis now called the Glaive. The modified rules and histories will predate the introduction of the official Fellblade into the 40K universe and will also explains why it replaced them and why some are still around today.

So I give you my "re-envisioned" rules for the Glaive super-heavy tank and its variants:

The Glaive:
https://docs.google.com/open?id=0BwtHo3MTNiIBNXJ6N2ZtZVlNSzA

The Broadsword:
https://docs.google.com/open?id=0BwtHo3MTNiIBMUh3X0ZjVFZiSTQ

The Ignitus:
https://docs.google.com/open?id=0BwtHo3MTNiIBbm1tUmJMbjRNbXM

The Warmaul:
https://docs.google.com/open?id=0BwtHo3MTNiIBQXlaUkxkR0JwRDg

The Lance:
https://docs.google.com/open?id=0BwtHo3MTNiIBYTlUSHVvOWo4dkE

Feedback and criticism is very much welcomed. I would very much like to hear what you like, don't like, and what needs to be fixed.

Also, if any of you have pics or names of your Glaives or Glaive variants that you’d like incorporated into these datasheets please let me know. This is very much a community project now.

Thanks everyone!

Very nice, and I'm especially loving the Warmaul and the Lance!

Your tanks have way more going for them then the GW/FW ones do.

On a crazy thought - I'd love to see a Hover variant.
After a quick google I think something like this:

Would be good inspiration for such a beast. (Slightly sleeker as it were, wider, flatter turret... it'd need some sort of 2-3 point large 'hover base')

(Of course if someone would make something like this:

I'd buy a set

 Ovion wrote:
On a crazy thought - I'd love to see a Hover variant.
After a quick google I think something like this:

Spoiler:

Would be good inspiration for such a beast. (Slightly sleeker as it were, wider, flatter turret... it'd need some sort of 2-3 point large 'hover base')

(Of course if someone would make something like this:

Spoiler:

I'd buy a set

not sure it'd fit into the style/background of space marines, but very nice idea for a tank!

 shrike wrote:

 Ovion wrote:
On a crazy thought - I'd love to see a Hover variant.
After a quick google I think something like this:

Spoiler:

Would be good inspiration for such a beast. (Slightly sleeker as it were, wider, flatter turret... it'd need some sort of 2-3 point large 'hover base')

(Of course if someone would make something like this:

Spoiler:

I'd buy a set

not sure it'd fit into the style/background of space marines, but very nice idea for a tank!

The top one would I think, as a rare / special thing

The second one... who cares / says it's for marines

 Ovion wrote:
The second one... who cares / says it's for marines

touché

Machinator, I need help with the tracks. How do I use all the pieces? And do I have enough in the Tank Combo pack to wrap them around the front as you have on yours?

 SickSix wrote:
Machinator, I need help with the tracks. How do I use all the pieces? And do I have enough in the Tank Combo pack to wrap them around the front as you have on yours?

Yep there's more then plenty there to do the ones like mine.

Bascially the two long sections go on the bottom. The four 4-link pieces are used to go from the bottom set of tracks up to the idler and drive wheels and also along the top from the idler and drive wheels. The individual ones are used around the idler and drive wheels and as needed between the sections for added length. It's a but of a tricky process so take it slow.

Good luck!

 Machinator wrote:

 SickSix wrote:
Machinator, I need help with the tracks. How do I use all the pieces? And do I have enough in the Tank Combo pack to wrap them around the front as you have on yours?

Yep there's more then plenty there to do the ones like mine.

Bascially the two long sections go on the bottom. The four 4-link pieces are used to go from the bottom set of tracks up to the idler and drive wheels and also along the top from the idler and drive wheels. The individual ones are used around the idler and drive wheels and as needed between the sections for added length. It's a but of a tricky process so take it slow.

Good luck!

Ok, thanks for the fast response! I have my hull together and will be working on the sponsons and magnetisation next.

SickSix: Feel free to post pics here when you get it done!

Agreed! I would love to see some pics!

I have 2 videos up on my YouTube channel (see link in sig) showing my build process so far. I have more footage that I will get edited and posted this week as well.

So you do! I also enjoyed the rivets video. Was thinking of picking some of them up after seeing what they can do and I think you just convinced me!

The plasma tank is very good, looking forward to get mine soon next year

Greetings all, it's been a long time since I've posted on this thread but I have some wonders to show you

As many of you know I started a flamethrower/thermal cannon around the same time as my Nova Cannon but it sadly fell to the wayside as I wasn't liking how it turned out. But after some revisions it has now emerged like a gun toting phoenix of doom!







And what giant flamethrower/thermal cannon is complete without a huge fuel tank?






The very first of these I hope to have at the Big Game III in Memphis next weekend with the offical release soon after. These pieces will be quite handy for those looking to build a Ignitus super heavy....

Wow, your modelling skills never cease to amaze
as always, keep it up!

I need one of them! Looks vaguely like a small piece of 40k artwork I was trying to reproduce, this saves me a lot of time.

Will you be selling the Fuel tanks on their own ? Just they might want to use them for my generator terrain ?

Also can I ask where you get your rivets and nuts from (the brown ones) if you don't mind sharing

 lone dirty dog wrote:
Will you be selling the Fuel tanks on their own ? Just they might want to use them for my generator terrain ?

Also can I ask where you get your rivets and nuts from (the brown ones) if you don't mind sharing

Yep, I probably sell these as a one and two pack just like my Tank Dynos. They'll go up in my store after next weekend.

I get the rivets and bolts from a company called Tichy Train Group. I highly recommend them

http://tichytraingroup.com/index.php?page=view_category.php&category=NBW+%26+Rivets&offset=0

Thanks will keep watch then thanks for the info as well thought they might have been from there

The world wide Big Game III is happening this weekend and I was asked to provide some prizes for the main game occurring in Memphis, Tennessee. Eager to show off my new parts I built a nice little tank as a giveaway.

Behold! The Ignitus tank!















The main weapon has a swappable flamethrower and thermal cannon piece held in place by magnets that allows you to switch barrels out very easily.





So if anyone is going to be at the Memphis event I’ll see you there!

oooo, I love those. Makes me very tempted to see if some of these guns and the smaller turrets would fit on my Chimera chassis Russ variants to make them look a bit "older" design.

I take it the sponson turrets are the small ones and about Chimera turret sized so the medium turrets would be suitable for a Russ?

holy shet man how many do you plan on building, i seriously do not wanna meet you any time soon
but seriously them tanks are just something else, good job on them

This has nothing to do with tanks but is another prize for the Big Game III I thought you guys would like to see. It's three of my Thunder Assault Speeders with space marines mounted on Dragon Forge's 40 mm x 75 mm Ancient Ruins base. And yes, I know the right shoulder pad is missing. That's so the winner can customize it to their chapter if they wish

Those are cool!

Just wondering - are all the parts so far for superheavies?

Would a chimera conversion kit be do-able - maybe a set-back turret version?

Would be funky to have some parts that would allow you to turn a Chimera into something that looked a bit different or that could even be used as a Russ.

I think I just drooled a little onto my lap after seeing the new Fellblade! I must also get round to ordering some jetbikes from you, they look absolutely fantastic.

Ross74H wrote:Those are cool!

Just wondering - are all the parts so far for superheavies?

Thanks! Most of what I make is geared toward the larger vehicles but I will be coming out this year with items for small and medium vehicles as well.

Ross74H wrote:Would a chimera conversion kit be do-able - maybe a set-back turret version?

Would be funky to have some parts that would allow you to turn a Chimera into something that looked a bit different or that could even be used as a Russ.

You mean like this: http://apocalypse40k.com/index.php?/topic/620-capricorn-pattern-chimera/

Send me a PM if you're interested.

Commander Cain wrote:I think I just drooled a little onto my lap after seeing the new Fellblade! I must also get round to ordering some jetbikes from you, they look absolutely fantastic.

Just remember, it's an Ignitus Tank- not a Fellblade

 Machinator wrote:

Commander Cain wrote:I think I just drooled a little onto my lap after seeing the new Fellblade! I must also get round to ordering some jetbikes from you, they look absolutely fantastic.

Just remember, it's an Ignitus Tank- not a Fellblade

Oh yes, silly me. Ignitusblade it is!

Hey guys and gals, they're out there!

Flamethrower/Thermic Cannons:



http://www.ebay.com/itm/Flamethrower-Thermic-Cannons-/261189733141?pt=Games_US&hash=item3cd01f0b15

Large Fuel Tanks in a one and two pack:



http://www.ebay.com/itm/Large-Fuel-Tank-/261189726523?pt=Games_US&hash=item3cd01ef13b

http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=251249727511&ssPageName=ADME:L:LCA:US:1123

And finally, the Inferno! Tank Combo Pack:

http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=251249738558&ssPageName=ADME:L:LCA:US:1123

that Capricorn is cool - I would be quite happy to rebuild all my Chimeras like that.

Just wondering - will it fit bigger turrets like the GW Russ / Predator turrets as well?

 Ross74H wrote:
that Capricorn is cool - I would be quite happy to rebuild all my Chimeras like that.

Just wondering - will it fit bigger turrets like the GW Russ / Predator turrets as well?

.

Not without some modifications. The GW Russ turret I believe uses a 5/8 inch mounting hole and the Predator uses a 1 inch. You'd have to adapt them to the smaller mounting hole on the Capricorn.

Well in my quest to never leave good enough alone I decided to go back to my old Light Turret and do a redesign. Now not only does it look much cooler (in my opinion) but it also has inserts for 1/8 inch diameter magnets and it has the option of either using a 1/8 inch mounting post or a 1 inch mounting ring, which will make it compatible with certain kits.









I've also made a little insert for my Butcher Cannon that will allow you field it not only as a large caliber siege weapon but also a quad barreled cannon.





So what do you think?

Nice looking turrets , are these going to replace the Light turrets in the tank combo packs ?
I can feel the need for ANOTHER FellBlade............

 Big H wrote:
Nice looking turrets , are these going to replace the Light turrets in the tank combo packs ?
I can feel the need for ANOTHER FellBlade............

Yep, that's the plan All Combo or Mega Tank Packs from here on out will come with the new Light Turret design.

Nice one , they look really good, not that the old ones looked bad either ! Magnet holes are pretty sweet too , tho not hard to drill shows the level of care you put in .
Really like your products mate , another Fellblade will be on its way as soon as I get the current one finished !

Ok they're done and available! Presenting the New Light Turret:











And Butch/Quad Cannon:

That new light turret design is awesome!

I Love the fellblades. they're a lot better than fw's model. I now need to find out where you live a steal them!!!

Banana Grot wrote:
I Love the fellblades. they're a lot better than fw's model. I now need to find out where you live a steal them!!!

Thanks! But that would be a long trip across the pond for you. Best to just order them

Mate , don't suppose you'd be making 'alternate" weapon sponsons for super-heavies that might also fit on Landraiders at all ?

 Big H wrote:
Mate , don't suppose you'd be making 'alternate" weapon sponsons for super-heavies that might also fit on Landraiders at all ?

Sponsons have been an idea I've been bouncing around. I have an idea of what I want to do with them but need to put the design on paper to see if it will work. What did you have in mind?

I'm not sure of a firm design , as such , but I'd like something along the lines of the FW MkII land raider sponsons (A straight rip of from WW1 British tanks)

They would work really well with one of your 'Fellblade' kits. A bonus would be fitting Landraider too then the whole force would have a unified look.

It might be easier to make them to fit Landraider and design a mounting plate for Fellblades ? The mounting plate could take the removeable armour slots on the Baneblade side and then be "Marine'd" with armour plate , and the little gunnery computer lenses you do.

Or a template to cut away some of the Baneblade side armour.

Don't Land Raider sponsons pivot a full 180* versus the 90* arc of a Baneblade / Leman Russ sponson?

 Nowlan wrote:
Don't Land Raider sponsons pivot a full 180* versus the 90* arc of a Baneblade / Leman Russ sponson?

It depends on the version. The MkIII Land Raiders have a full 180 arc but the MkI and MkII are limited to 90 degrees. The sponson I'm thinking of making would have the full 180 degree arc. I need to get working on that....

Looking forward to it - I'm sure it will be awesome!

I really love your work Mach... so precise and well designed... Nice to see you are still at it!

Hey mate , how are the sponsons coming along ?

 Big H wrote:
Hey mate , how are the sponsons coming along ?

Still on my list of things to do. Got to finish this up first for Feast of Blades:

http://www.dakkadakka.com/dakkaforum/posts/list/550446.page

Hey mate! This stuff looks awesome! Was recommended a look at your products by Big H... many thanks

Really impressive work! Am just waiting for pay day then i will be on the ebay store! looking for a couple of canon for my Macharius scratch.

Cheers!

Many thanks to Big H then

I should be able to help you out, cannons are one of my specialties....

Love your stuff Mach... do have anything that will easily substitute for a one-missile per volley turret that would fit in the predator mount (in case I wanted to "hunt" fliers without a brand new kit)?

 Lobukia wrote:
Love your stuff Mach... do have anything that will easily substitute for a one-missile per volley turret that would fit in the predator mount (in case I wanted to "hunt" fliers without a brand new kit)?

I am planning to make something similar for my Light and Liberator Turrets. Basically a missile rack insert that can be swapped out with the rest of the weapons. It's another thing on my list

I wonder what this could be?

sponsons??

I know what I think (hope!) it is, but I'm probably just projecting!

 Machinator wrote:
I wonder what this could be?

Cool??? Will It be Cool??? Im the BIG WINNER!!!!!

Alpharius wrote:I know what I think (hope!) it is, but I'm probably just projecting!

No Alpharius, it's not for your project. But your days is coming....

munkey joe wrote:Cool??? Will It be Cool??? Im the BIG WINNER!!!!!

Oh it will be cool, and we'll all be winners

Hey Machinator
Awesome looking work there mate! Big fan!

sponson lookins awesome... another addition to the blood and skulls ranks!!

cheers

 Machinator wrote:
Oh it will be cool, and we'll all be winners

So does anyone remember that Dark Angel Lance I started way long ago?

Well I finally finished putting it together! Take a look:











Now usually this is the time where I begin the painting process but I decided to do things a little different this time. It’s been a long while since I’ve picked up a paint brush and I really wanted this one to be done perfectly. Luckily enough my friend Tommy Clark Munkey-Joe offered his services so it is off to him for a snazzy coat of paint.

But there’s more!

With the holidays coming up I thought it would be in the spirit of the season to give a little something back to the community. So I’ve decided that this item will go up for auction with ALL of the money raised going to Toys for Tots just in time for Christmas! I’ll even cover the shipping cost. Not only will be fun but it will be going towards a great cause as well.

So keep your eyes peeled for details!

WoW , THAT's alot of Plasma !

Nice one mate ! Shame all the companies out there can't do a simple act such as yours for charity !

Well done !

I have to say I normally hate it when marines still guard tech but this is pretty dam impressive plus going to auction for charity I just love it even more so.

Very good of you to do so as well I am sure the out come will bring some joy to the winner and the children it benefits.

Fellblades aren't really stealing Imperial Army tech though, are they?

And you've got to love a pintle mounted assault cannon!

This is so full of freakin' awesome. .

I find myself wishing i had even a fingernail full of the talent to come up with these.

 Alpharius wrote:
Fellblades aren't really stealing Imperial Army tech though, are they?

And you've got to love a pintle mounted assault cannon!

The basics is imperial Guard tech and you steroid induced bullies have enough of your own

 lone dirty dog wrote:

 Alpharius wrote:
Fellblades aren't really stealing Imperial Army tech though, are they?

And you've got to love a pintle mounted assault cannon!

The basics is imperial Guard tech and you steroid induced bullies have enough of your own

Well technically I'm not calling these Fellblades anymore now that Forgeworld has an official kit. This particular one is a Lance variant based on the Gladius super-heavy chassis, which was the predecessor to the Baneblade (all unofficial, of course ). The latest unsanction goodness on these creations can be found here: https://www.facebook.com/pages/Blood-and-Skulls-Industry/302835446422577?ref=hl#!/media/set/?set=a.608421485863970.1073741833.302835446422577&type=3

 Machinator wrote:

Now usually this is the time where I begin the painting process but I decided to do things a little different this time. It’s been a long while since I’ve picked up a paint brush and I really wanted this one to be done perfectly. Luckily enough my friend Tommy Clark Munkey-Joe offered his services so it is off to him for a snazzy coat of paint.

Hey that's ME!!! LOL

Man that's a beauty....

 munkey joe wrote:

 Machinator wrote:

Now usually this is the time where I begin the painting process but I decided to do things a little different this time. It’s been a long while since I’ve picked up a paint brush and I really wanted this one to be done perfectly. Luckily enough my friend Tommy Clark Munkey-Joe offered his services so it is off to him for a snazzy coat of paint.

Hey that's ME!!! LOL

Man that's a beauty....

Indeed it is, and your job now is to make it even beautifullier

I have been waiting for that tank to be finished for such a long time! Needless to say, it was well worth the wait, that attention to detail is astounding, 10/10 from me.

Also, extreme kudos to you for putting it toward a good cause..

 Machinator wrote:

Now usually this is the time where I begin the painting process but I decided to do things a little different this time. It’s been a long while since I’ve picked up a paint brush and I really wanted this one to be done perfectly. Luckily enough my friend Tommy Clark Munkey-Joe offered his services so it is off to him for a snazzy coat of paint.

Well here is some progress.... All WIP and final pics should be before next week.
small sponson turrets




Main turret





And the gunner

Looking good Tommy!

 Machinator wrote:
Looking good Tommy!

Thanks!! I have a couple of more pics with more soon.....

Base coating




and a pic of the final chipped turret

And FINISHED!!

So freaking cool

That thing will make other marine players gak themselves at the sight of it

Very nice indeed, love all the plasma.

What is all of that Plasma? The top sponsons are Plasma cannons, I'm thinking the larger sponsons are Plasma Destroyers/executioner Plasma cannon, and the main weapon is the the same as as the the super-heavy one.

 McNinja wrote:
What is all of that Plasma? The top sponsons are Plasma cannons, I'm thinking the larger sponsons are Plasma Destroyers/executioner Plasma cannon, and the main weapon is the the same as as the the super-heavy one.

LOL Ask Machinator... hes the guy who built it!!!

All the plasmas all the time!


Wait a sec i spot a assault cannon.

It should be a pintle mounted plasma gun!.

The Angelus Redemptor’s service to the Dark Angels Legion can be traced back to the later days of the Great Crusade where it served as the command vehicle of their elite armored company known as the Ironwing. Constructed by the Legion’s techmarines under the gaze of the Mechanicum this super-heavy tank was fitted with a unique dual chambered plasma reactor that could not only power the machine’s main drive indefinitely but could also be tapped to provide munitions for its vast array of plasma based weaponry. However, in the chaotic aftermath of the Horus Heresy the Angelus Redemptor disappeared from the Imperial records and it was feared lost to the Mechanicum, until now….

At long last it is here, rolling from the forges of Blood & Skulls Industry and expertly painted by Tommy Clark “Munkey Joe” I present to you the Dark Angels very own super-heavy tank: The Angelus Redemptor! Based on the Baneblade plastic kit this tank is loaded with tons of resin parts from Blood & Skulls Industry and Games Workshop plastic bits making it one huge custom model that would be the centerpiece of any Dark Angel army. Gothic, mysterious, and armed with more plasma weapons then you can shake a Sword of Secrets at this machine of war truly has a place alongside the sons of Lion El’Johnson on the battlefield. And now it can be yours!

The Angelus Redemptor is now available for auction on eBay but the story does not end there! In keeping with the holiday spirit 100% of the money raised from this auction will go to Toys for Tots, and I’ll even cover the shipping. So be your own angel astartes to the children in need this season and place a bid today!

Dark Angels Angelus Redemptor eBay Auction

I love thows curved sponsons. Will they appear on your ebay store in time?

For us who don't want or need a top turret on top of out sponsons have you cosidered a cap piece? I like the look of the converted "fellblades" more in all honesty.

McNinja wrote:What is all of that Plasma? The top sponsons are Plasma cannons, I'm thinking the larger sponsons are Plasma Destroyers/executioner Plasma cannon, and the main weapon is the the same as as the the super-heavy one.

Here's the list:

Plasma Eliminator in main turret
Executioner Plasma cannon in hull
Twin-linked Plasma Cannon on hull turret
Twin-linked plasma blasters and one plasma storm burst in sponsons

Now, what are all of these plasma weapons? Rules are coming my friends

Lockark wrote:I love thows curved sponsons. Will they appear on your ebay store in time?

For us who don't want or need a top turret on top of out sponsons have you cosidered a cap piece? I like the look of the converted "fellblades" more in all honesty.

Something similar to this will be coming but no this one. I didn't like how the design stuck out so far out from it mount. You'll also be happy to know the top and bottom are reversible so you can have it with or without a top turret

Found these pics on the next , some guys making 40k inspired images or something .

THIS is what a Leman Russ should look like !!!

Please make it ! Or parts to convert a WW2 Tiger model (I think thats what its based on )

That is a lot of work and it looks great. Hopefully you end up with a product you love

 Big H wrote:
Found these pics on the next , some guys making 40k inspired images or something .

THIS is what a Leman Russ should look like !!!

Please make it ! Or parts to convert a WW2 Tiger model (I think thats what its based on )

Holy cow those are beautiful..... I would love to see those too..... Maybe that can be a project for this year.... I need to work on my regular Armor...

 munkey joe wrote:

 Big H wrote:
Found these pics on the next , some guys making 40k inspired images or something .

THIS is what a Leman Russ should look like !!!

Please make it ! Or parts to convert a WW2 Tiger model (I think thats what its based on )

Holy cow those are beautiful..... I would love to see those too..... Maybe that can be a project for this year.... I need to work on my regular Armor...

Yeah Munkey Joe , these would awesome wouldn't they ? Or some other WW2 / 40k kitbashes such as Panzer IV's or even a modern Abrams / 40k mashup .

Start prodding Machinator !!!!!

 Machinator wrote:


If you look at the first two tanks in this thread, the Sanctimonia Cruoris and the Iron Breaker, you can get an idea of the Heavy and Medium Turret size. I don't have a pic of the Liberator Turret on a Leman Russ (although it will fit) but I do have one of it on a Rhino chassis:

I know this is an old photo, but do you make/sell all of the conversion parts in this pic?

Thank goodness that, once again, you have managed to avoid that pintle-mounted-heavy-stubber nonsense, which would have truly pushed this tank over the edge, power-wise.

--B.

 Azazelx wrote:

I know this is an old photo, but do you make/sell all of the conversion parts in this pic?

I would imagine he does, as I got one about a year or so ago. its a great kit if he still has the molds.

Well I'm back and just in time for another Toys for Tots project!

This time around I will be tackling a super-heavy for the Space Wolves once again based on the Baneblade kit, a number of my own specialty parts, some plasticard and more bits than you can shake a stick at (Go fetch Russ! Woof! Woof!).

First up is the turret and main weapon, currently called the Helfrost Annihilator. This was basically made from two of the main cannons from the Stormfang kit mounted side by side on one of my Heavy Tank Turrets with a bit of plasticard in between. I also used some of the helfrost cannons in the small hull turret up front.





The track sections are using my Oppressor Pattern 1.0 Tank Tracks (seemingly appropriate for the Space Wolves) along with a bunch of bits from the SW kits, Forge World and plasticard.









Once again this beast will be painted by our good friend Tommy Clark “Munkey Joe” and will go to auction on eBay in December with 100% of the winning bid going to Toys for Tots!

Help support a good cause!

Really nice looking tank - and for a good cause!

Love those tank treads too - they are especially wicked looking!

Hey, I think I saw your stuff on ebay, and I finally put the two and two together and checked this thread. Now that you've replied, I won't be afraid of the Necro either.

I have a question. Can you take a single widowmaker cannon and place it into the groove on the light turrets? I am curious as I want some gun emplacements for my Fortress I am building but, I don't want to go bankrupt either...

(You'd be rich though, so I guess someone wins... )

Also, if I PM you a few questions would you be interested in answering them? I have a lot of conversions for my army involving howitzer style conversions, so those widowmaker cannons yet again interest me. Glad to see you're doing this for a good cause, and your tanks still make me drool like mad.

Great work as usual Tom!

I hope this beauty makes a lot of money for such a great charity.

Best wishes, Phil.

Great to see an update! Excited to see the final project.

Thanks everyone! I hope to have the model finished this week and sent off to the painter.

 Stormwall wrote:
Hey, I think I saw your stuff on ebay, and I finally put the two and two together and checked this thread. Now that you've replied, I won't be afraid of the Necro either.

I have a question. Can you take a single widowmaker cannon and place it into the groove on the light turrets? I am curious as I want some gun emplacements for my Fortress I am building but, I don't want to go bankrupt either...

(You'd be rich though, so I guess someone wins... )

Also, if I PM you a few questions would you be interested in answering them? I have a lot of conversions for my army involving howitzer style conversions, so those widowmaker cannons yet again interest me. Glad to see you're doing this for a good cause, and your tanks still make me drool like mad.

Yes you could mount the Widowmaker cannon to the Light Turret but it would look very odd given that the Widowmaker is bigger than the turret How big of a cannon/turret system are you looking for? I was planning to make a smaller cannon for the Light Turret. But if you want to keep the size of the Widowmaker take a look at my Medium Tank Turret.

I'd be glad to answer and questions. Just shoot me a PM.

Thanks for your quick reply. I sent a PM. I couldn't really find what I needed in your listing due to the wonky odd numbered amounts I needed, and I sent some pictures and questions along for you to help me with. Thanks for taking the time out to answer them.

Are the liberator turrets gone for good?

 Zuul wrote:
Are the liberator turrets gone for good?

No . But they and the sponsons are undergoing a refresh. I don't know when they'll be back but it will be in the next few months.

 Machinator wrote:

 Zuul wrote:
Are the liberator turrets gone for good?

No . But they and the sponsons are undergoing a refresh. I don't know when they'll be back but it will be in the next few months.

Awesome. I look forward to seeing them again. The old turret was perfect for a conversion I had in mind, hopefully the new one has that little flat spot too for my hacoc launcher.

 Machinator wrote:

 Zuul wrote:
Are the liberator turrets gone for good?

No . But they and the sponsons are undergoing a refresh. I don't know when they'll be back but it will be in the next few months.

Unrelated but, do your sponsons normally go for 16$, or is it due to the refresh phase? (Either way I understand, supply and demand laws, or if that's not the case the sheer work involved.)

Also my first PM didn't go through but, I think I got it to work. Just feel bad for finding a third, (fourth?) outlet of places to buy 60$ worth of bits from.

Zinge, Anvil and now Mach are going to eat my stock market money and my children's savings at this rate.

Welcome back Tom!

Question if I may? the Capricorn Chimera, do you have any estimate on when you might be able to get some more of the kits made?

 Knightley wrote:
Welcome back Tom!

Question if I may? the Capricorn Chimera, do you have any estimate on when you might be able to get some more of the kits made?

Glad to be back

Yes I plan to have the Capricorn Conversion Kit and my Assault Speeder line available again before or soon after Christmas.

Although I have no plans for a fellblade yet I'm going to use those badass turrets on my home made board when I finish it.

 Machinator wrote:


Glad to be back

Yes I plan to have the Capricorn Conversion Kit and my Assault Speeder line available again before or soon after Christmas.

You have no idea how happy I am to hear that!

Also I'll add my Felblade picture in here as well, seeing as its your kit that helped build it (although I will put it in spoilers)

All these tanks make my Rhinos and Predators die a little on the inside. (In their Machine Spirit, lol?) They make my wallet weep for days of being full too...

 Knightley wrote:

 Machinator wrote:


Glad to be back

Yes I plan to have the Capricorn Conversion Kit and my Assault Speeder line available again before or soon after Christmas.

You have no idea how happy I am to hear that!

Also I'll add my Felblade picture in here as well, seeing as its your kit that helped build it (although I will put it in spoilers)

Spoiler:

and another variant

@ CaptainKnightlySquiggles: 2 op 4 me please nerf that tank Emprah.

Update time! It's been a long few weeks but the beast is finally done!

Now it will be sent off to our friend Tommy Clark Munkey-Joe for a coat of paint. The plan after that is to put it up for auction in December with 100% of the winning bid going to Toys for Tots!

So what should we name this thing?

Impressive. How about Garmr, the Hell Wolf (guardian of the gates of Hel, herald of Ragnarok?

I like naming it after the Hell Wolf!

Very cool tank! Like the small little tailsments on the sides. Very cool.

Frost Bane

Thinking about buying your twin sponsons to make a mk II b land raider for my heresy death guard are they compatible with minimal work or what?

e.earnshaw wrote:
Thinking about buying your twin sponsons to make a mk II b land raider for my heresy death guard are they compatible with minimal work or what?

I'll check. You would have to cover up the hole for the door but they should fit.

Hey Mach, placed an expensive order a few days ago. I got a spotlight and a green twin led set for my old rhinos.

Anyways, I am extending my old RT rhinos with cardstock and making them look more like the old Spartan tanks. Do you have any treads that would be able replace the old treads and wrap around completely?

 Stormwall wrote:
Hey Mach, placed an expensive order a few days ago. I got a spotlight and a green twin led set for my old rhinos.

Anyways, I am extending my old RT rhinos with cardstock and making them look more like the old Spartan tanks. Do you have any treads that would be able replace the old treads and wrap around completely?

Thanks for the order!

Can you post some pics of what you're doing? I won't think a RT Rhino could be extended into a Spartan But if the vehicle will be about Land Raider in size and is Imperial I'd recommend the Liberator Pattern 0 Tank Treads:

http://www.ebay.com/itm/Liberator-Pattern-0-Tank-Treads-40-/251466338701?pt=Games_US&hash=item3a8c8fd18d

You'll probably need about three sets to wrap all the way around.

Sent a PM to explain what I plan to do a bit better. Once I get back home I can't wait to open up the the order I made.

Wow. These look great!

Great looking and truly menacing tank there! REALLY like the little round sponsons...... I am scratch building a Macharius "MK1" currently... (actually I just ordered a set of your Liberator 1.0 tracks last week, cant wait for them to arrive)..... but think those sponsons might fit the bill also.... firstly, I need to decide if I am going to have sponsons at all or go without them..... hmmm.. anyway..... Really nice tanks and definetly gives off the aggressive and Wolf feel!

 MagosBiff90 wrote:
Great looking and truly menacing tank there! REALLY like the little round sponsons...... I am scratch building a Macharius "MK1" currently... (actually I just ordered a set of your Liberator 1.0 tracks last week, cant wait for them to arrive)..... but think those sponsons might fit the bill also.... firstly, I need to decide if I am going to have sponsons at all or go without them..... hmmm.. anyway..... Really nice tanks and definetly gives off the aggressive and Wolf feel!

Thanks!

I also have these sponsons if you want to have a taller look. They are also magnetize-able and can fit the sponson weapons from the Land Raider kits including the flamestorm cannon and the hurricane bolters:

http://www.ebay.com/itm/Dual-Weapon-Sponsons-Beta-/261731822034?ssPageName=ADME:L:EOISSA:US:1123

Awesome looking parts! I will have a look over the project this evening and get back to you!

Cheers,

a question on the type of resin you use. I have been here a lot of people talking about you must need a vacuum chamber for bubbleless casting result, but with the type of resin I use, I don't seem to have that and i don't use vacuum chamber. I wonder if you have the same issue with your resin cast, bubble I mean? Cause i can see you are using this white type of resin which is probably the same stuff that I am using. I guess the thing I want to clarify to myself is whether vacuum chamber is a must? I know professional use it, but is it a must? cause there are a lot of low viscosity resin out there these days, so why can't people use it more often? is is because it is more expensive? I am not ranting, but I am trying to understand the world of resin and casters, and also to give myself a more peaceful mind.
thanks for anyone that can enlighten me.
Keith