Hey. i just finished new miniature. Heavy battle mech RX-704 "Purifier": Sci-fi miniature in 28 mm scale - 95 mm height. 11 parts + base. Casted in resin
Alternative model for Contemptor, Kastelan robot, dread knight etc.

I hope you like it!

Miniature available in my store.

http://www.albinoravenmini.com/#!purifier/cmqp

I wish you hadn't put purity seals all over it. Kinda limits its use to 40k only.

Ugh +1 on the purity seals comment. I was already looking at this for something else and noticed them. :/

It's a nice-looking design but I'm also going to nitpick: it doesn't look like it's capable of standing on its own without a convenient rock to support the left foot. If either the right foot was closer to being under its center of gravity or the left leg was flat on the ground like the right leg, it would be a more practical pose.

Clicking on the link to see it in the store, it comes with a base that has that "convenient rock" built into it. However, I would have preferred the model to be constructed to have a bit more posing options, as it appears to be "locked" into that single pose.

Had the price been slightly lower and if there were a few more options in its appearance, I could see myself buying quite a few to expand my Mechanicum army. Still a very nice looking model, though, but just a bit too limited.

Yeah, I was looking at one as a companion to some of the Corsairs from Bones 3 (up on KS right now). The purity seals are a deal breaker.. only wanted one though so the pose didn't bother me too much. Price tag is a bit on the hefty side too :/

Looks very cool, love all but the ammo belts as they're a bit chunky. Very nice work!!

I really like it. A good Thanatar stand in.

Kool, original design. Decent price, considering.

But as you see, Dakka is never satisfied.

It'll happen eventually, so I'll go ahead and get it out of the way.

Omg. Why isn't it plastic? Duh.

Great artwork!

Looks a lot better than the kastelans in my opinion.

Wow this looks really awesome, is this guy Kastellan robot sized or Thanatar sized?

Edit-

Just looked at the price jesus christ if these are kastellan stand ins they are hella expensive. Just about $100 for two.

Apparently people don't know how to use a craft knife to chip off those purity seals...

 HisDivineShadow wrote:
Kool, original design. Decent price, considering.

But as you see, Dakka is never satisfied.

It'll happen eventually, so I'll go ahead and get it out of the way.

Omg. Why isn't it plastic? Duh.

It's a pretty valid point. It's a sweet design, I'd love to have one for my army / get one to use the parts and heavily convert.

Problem is I don't play Imperials, so having it bedecked in purity seals.. Well, really limits my usefulness for it. Sure I could scrape them off, but I'd lose a not insubstantial amount of detail in doing so.

 Wyrmalla wrote:
Apparently people don't know how to use a craft knife to chip off those purity seals...

But then they wouldn't have anything to complain about.

To the OP: I really love your work and look forward to seeing what else you come up with.

Yeah, nice design. Like it, looks way better that the castraderp bots they released for the Mechanicus last time. My only complaint is from the "sense" department. Tripple barells are made to prevent overheating from long bursts/high fire rates. Considering the size of the ammo here, you just do not have the ammount to cause overheating in the first place, so a single longer barell (accuracy, anyone?) would actuallly make more sense than the 3 short stubs there. Those are nice enough as a stand-in for a multi-melta but these don't need belt-fed ammo...

Don't mind the purity seals, don't like the open shins but that can be easily remedied with some plasticard

That is an absolutely beautiful sculpt.

Fantastic artwork as well.

Obviously a very talented artist and sculptor!

Hey. Thanks for positive feedback!
Just add cheaper version on site - 60mm height.
ye, All purity seals are on flat surfaces and you can easy remove them.

HisDivineShadow Thanks, plastic too expensive to produce

Tannhauser42 ye , i will add more options in future



http://www.albinoravenmini.com/#!purifier/cmqp

Really cool looking model.
Looks like a "glass cannon" with all the exposed moving bits which happens to make it look good.
Typical Mechanicus "throwaway" weapons platform.
I dub it "Mortyr" or Mort for short.
I like the multiple play on words, he looks like the enemy will hurt more than him initially.
<edit> Reminds me a bit of the Robocop Ed209's round gun arms and exposed hydraulics, the belt feeds look better to me though.
Better than the Kastelan robots and arms for sure.
BTW this comparison is not a bad thing.

Any chance we can see some side-by-side comparisons with the two mech sizes, next to a 28mm soldier like a Guardsmen or a Space Marine? Just trying to work out how they will look in person.

Not seeing the cheaper/smaller version on the site..

It's on the same page, you can add to cart right underneath the bigger one



60mm height

32mm base

Casted in resin

25.00$

Looks awesome! Great work!

Ah , thanks, found it. Would like to see the 60mm version next to something we know (a 28mm human or similar) for scale.

Anyone order this yet?
I like it but to my eye all the pictures contain Computer graphics and not a real model, could you make a picture with some other figures for size comparison?

 Jehan-reznor wrote:
Anyone order this yet?
I like it but to my eye all the pictures contain Computer graphics and not a real model, could you make a picture with some other figures for size comparison?

I backed the Indiegogo campaign for his fantasy models and can confirm the castings he sends out are good.

Great looking model.


Looks like if you left the rock off, it wouldn't be too hard to adust the arms a little to put him in a running pose.

Those hollow shins work for mecha but for a 40k substitute they'd need to be filled. Hobby time!

95mm height robot with cultists

Really like it but the 40K-esque regalia puts me off.

wow it is a lot bigger than I thought.

Love most of your "heroes/troopers" btw. Lovely design.

Thanks that helps a lot

That's a beauty!

I might get a trio of these instead of bloody Centurions.

Damn, that's closer to Dreadknight size than Centurions!

Gorgeous model! I really love the Battletech influence, it is like a Battlemaster `Mech was sucked into the Warp and came out the other side bigger and meaner.

 DarkTraveler777 wrote:
Gorgeous model! I really love the Battletech influence, it is like a Battlemaster `Mech was sucked into the Warp and came out the other side bigger and meaner.

That was my thought exactly.

I love the thing. The problem is there is only one pose available, making it impossible to field more than one.

Nice minis you have made...
Keep up the good work!

Can we get a similar scale shot with the smaller version? The big one looks to be almost Dreadknight sized or whatever the taller FW Dreadnought is maybe. I'm thinking the shorter version will be closer to the standard boxy Dread or maybe a Centurion.

MLaw ye ) sure.
StarDrop Thanks!
SickSix soon will be 1 more pose and alternative weapons


I'm working on a new set of weapons. Now ready version with rocket launchers. Soon will bee hands with claws and saw
All versions are available on my website.

http://www.albinoravenmini.com/#!miniatures/c1dsh



60mm height robot with cultists



claws and saw

I want to like it but I cant.

1. The purity seals, as mentioned.

2. Calling them 'battle mechs' is aun unfaior challenge. Mech has been genericised enough now, even without the -a but battlemech is proprietary. It also doesnt properly look like a battlemech.

3. Too much hard shadow or what looks like hard shadow.

4. Many pieces have flat detail, for example the lowr legs have 'girder' effect from the sides by are flat and featureless from the front.

5. Too many confused oddities on the weapons. The chainguns have long ammo feeds, which look great by the way but also nodules reminiscent of plasma weaponry (as this has a strojng 40K reference).

6. Many of the muzzles do not inspire. The chainguns are fine, but what with the shoulder mounts, are those optics lenses or are they missile pods. If they are missile units they need to look more missiley, if they are optics the whole arrangement should look like it has a wider vision angle, even turreted. As fro the drum magazine guns wuth six 'emitters' these also seem a confused hybrid of ammo and energy weaponry. What is up with those weapon ends, give it a ballsy gatling cannon or large mortar grenade muzzle.

7. Most of all the leg arrangements. Like the Imperial knight you have one standardised pose, whicvh is ok for a asingle model but looks crap when you have a unit. At least with the Imperial knight it stoodf on two feet, for this model each and every one must have the left leg resting on an object and the right leg on flat ground. It compounds the problem. As you are making more arms make some more legs too.



Nixce try but it fails on composition. If you take this back to the digital masters and removwe the purity seals, perhaps putting them on a seperate sprue, and give multiple options for legs and loincloths to ensure variety, and made some minor artistic adjustments to the weaponry I think you will be on to a winner.

The molded on purity seals are the only real thing holding me back at this point.

I'm glad to hear there will be another pose.. it's definitely needed.

I like most of the other artistic choices you have going on though.

I have a suspicion that if that chainsaw arm was available by itself you might win over some purchases from Ork players or maybe Chaos.

As an aside.. I really like that goblin cook on your webpage.. is that backpack separate though? It would not make sense in the adventure I plan on using him in.. I could easily slap that on someone else but he needs to be just his lovely self.

Orlanth Thnks for feedback.

MLaw Hi ) Yes, backpack is separated on goblin miniature.

 SickSix wrote:
I love the thing. The problem is there is only one pose available, making it impossible to field more than one.

People buy plenty of those kastellan robots which are quite possibly one of GW's worst models.. and they basically only have one pose.

Some more photos

Those are probably the best repeating missile launcher type weapons I've ever seen on a miniature.

Nice size, cool design, great sculpts, reasonable price?

I'll probably pick one up in the near future, bookmarking this for reference.

Very cool stuff.

EDIT: just saw some of your other stuff and the 35mm "real" models, if you ever make some 28mm dudes with helmets, gas masks, and AK-74's, I'd buy a grip of those

Any chance of giving this a not Grey Knights Dreadknight type load out? It's a much, much, much nicer model otherwise imo, great effort!

I have to agree on the purity seals- anyone using this for 40k already has tons of purity seals sitting around, and anyone using it for something else probably doesn't want them on there.
Other than that and the lack of leg options, pretty cool sculpt.

It is very pretty, but I have no idea what I'd use it for.

That being said, I might buy one anyway.

Fething hilarious to see people complain about a few purity seals... Since when does a designer need to do everything for you? There's a reason hobby knives exist lol.

OP- LOVELY model and design. I can already see this as a stand in for several minis. Will pick up some 60mm for castellans and possibly a 95mm for a forge fiend.

Eh, it makes sense to me to put the purity seals on the separate sprue. If nothing else you don't want 2 robots in the same pose with the same seals in the same places. Plus it is a bit strange to make them THAT keyed to GW style Imperial armies and require cutting them off. Not a big deal, but if I have to pick between slicing off with a knife and gluing on, I'll always pick gluing on.

If you came out with a sword arm I'd love it.

Melee version of robot ready to deploy!

This project has been designed not so long ago, keeped in stringent secret, and used only during dangerous operations, as a rule for killing extraterrestrial forms of life. This model is a universal killing machine

http://www.albinoravenmini.com/#!melee/c10wx



Mattlov Thanks!

Red Corsair i remuved some purite seals

demontalons Thanks! may bee i will create sword for him.

Vaktathi Thank you!

MLaw Merci!

My only complaint was the leg posing on a rock. It looks like you addressed that, so good work.

Curious to see how many people nit-picking about stupid things such as "purity seals" or "standing on a rock" are actually going to buy this model now that he's kowtowed to your ridiculous demands

My guess? Less than 10%. Prove me wrong or you're just being a crab in the bucket

For what it's worth, I think it's a pretty slick mini.

 Quintinus wrote:
Curious to see how many people nit-picking about stupid things such as "purity seals" or "standing on a rock" are actually going to buy this model now that he's kowtowed to your ridiculous demands

My guess? Less than 10%. Prove me wrong or you're just being a crab in the bucket

There is absolutely nothing wrong with making genuine criticisms to a model even if you don't have any desire to buy the thing. Sure the purity seal thing is a bit nitpicky but without the rock, the model still looks awesome and let's you buy more than one without them looking identical!

Awesome cc hands by the way.

 Commander Cain wrote:

 Quintinus wrote:
Curious to see how many people nit-picking about stupid things such as "purity seals" or "standing on a rock" are actually going to buy this model now that he's kowtowed to your ridiculous demands

My guess? Less than 10%. Prove me wrong or you're just being a crab in the bucket

There is absolutely nothing wrong with making genuine criticisms to a model even if you don't have any desire to buy the thing. Sure the purity seal thing is a bit nitpicky but without the rock, the model still looks awesome and let's you buy more than one without them looking identical!

How can you make a genuine criticism if you never intended to buy that thing and you're not the target market? I might as well go criticize the stitching and fog light placement on the new BMW X5, I don't find them aesthetically pleasing. But if I'm not the target market, why should they ever take me seriously? It's completely meaningless. The robot's clearly intended for 40k, it's like complaining that I'm going to have to shave the insignia off some Infinity or Warmahordes figure for use in another game.

It very well may be genuine, but it's completely meaningless and worthless

The rock thing, sure, but that's always why you can convert if you really do intend on purchasing multiple and these guys are so big I doubt I'd want an army of them, I'd get 4 max for my Heresy mechanicus army.

 Quintinus wrote:

 Commander Cain wrote:

 Quintinus wrote:
Curious to see how many people nit-picking about stupid things such as "purity seals" or "standing on a rock" are actually going to buy this model now that he's kowtowed to your ridiculous demands

My guess? Less than 10%. Prove me wrong or you're just being a crab in the bucket

There is absolutely nothing wrong with making genuine criticisms to a model even if you don't have any desire to buy the thing. Sure the purity seal thing is a bit nitpicky but without the rock, the model still looks awesome and let's you buy more than one without them looking identical!

How can you make a genuine criticism if you never intended to buy that thing and you're not the target market? I might as well go criticize the stitching and fog light placement on the new BMW X5, I don't find them aesthetically pleasing. But if I'm not the target market, why should they ever take me seriously? It's completely meaningless. The robot's clearly intended for 40k, it's like complaining that I'm going to have to shave the insignia off some Infinity or Warmahordes figure for use in another game.

It very well may be genuine, but it's completely meaningless and worthless

The rock thing, sure, but that's always why you can convert if you really do intend on purchasing multiple and these guys are so big I doubt I'd want an army of them, I'd get 4 max for my Heresy mechanicus army.

We're wargamers, are we not? How are we not the target market?

Does it have a distinctive 40k feel? Absolutely.
Are there other systems out there which you could use this great sculpt in which aren't 40k? Absolutely.

Even within 40k, there are multiple uses for this thing. A Chaos player who runs iron warriors / doesn't like the half-flesh-half-metal abomination think that their dreads have going for them is a very likely buyer. Ork players (like myself) are likely buyers... because Orks. With some plasticard to cover some areas and smooth things out, a Tau player could even invest in this. Heck, even for Imperials the fact that the seals are always in the same place is problematic.

The point is that purity seals don't do anything for other systems / even several potential type of buyers in 40k. It's not a huge problem, but as someone else said it's much better to glue than to cut.

It's far from a meaningless critique, and I find it ironic that the people calling it so seem to be the most riled up bunch in the thread. It's a genuine observation of how to improve the product and make it even more appealing to different sets of buyers.

 morganfreeman wrote:

 Quintinus wrote:

 Commander Cain wrote:

 Quintinus wrote:
Curious to see how many people nit-picking about stupid things such as "purity seals" or "standing on a rock" are actually going to buy this model now that he's kowtowed to your ridiculous demands

My guess? Less than 10%. Prove me wrong or you're just being a crab in the bucket

There is absolutely nothing wrong with making genuine criticisms to a model even if you don't have any desire to buy the thing. Sure the purity seal thing is a bit nitpicky but without the rock, the model still looks awesome and let's you buy more than one without them looking identical!

How can you make a genuine criticism if you never intended to buy that thing and you're not the target market? I might as well go criticize the stitching and fog light placement on the new BMW X5, I don't find them aesthetically pleasing. But if I'm not the target market, why should they ever take me seriously? It's completely meaningless. The robot's clearly intended for 40k, it's like complaining that I'm going to have to shave the insignia off some Infinity or Warmahordes figure for use in another game.

It very well may be genuine, but it's completely meaningless and worthless

The rock thing, sure, but that's always why you can convert if you really do intend on purchasing multiple and these guys are so big I doubt I'd want an army of them, I'd get 4 max for my Heresy mechanicus army.

We're wargamers, are we not? How are we not the target market?

I drive a luxury car, how am I not the target market for a BMW? You're applying a broad concept to something that's more focused.

Does it have a distinctive 40k feel? Absolutely.
Are there other systems out there which you could use this great sculpt in which aren't 40k? Absolutely.

Even within 40k, there are multiple uses for this thing. A Chaos player who runs iron warriors / doesn't like the half-flesh-half-metal abomination think that their dreads have going for them is a very likely buyer. Ork players (like myself) are likely buyers... because Orks. With some plasticard to cover some areas and smooth things out, a Tau player could even invest in this. Heck, even for Imperials the fact that the seals are always in the same place is problematic.

Ork and Chaos players already have to convert when they buy Imperial vehicles and models unless they choose to leave the aquilla on it anyway, shaving some purity seals is nothing unexpected. That argument means nothing.

Let's drop the tumblr buzzwords, why is it problematic to have purity seals? Try to explain yourself in more than one word.

It's far from a meaningless critique, and I find it ironic that the people calling it so seem to be the most riled up bunch in the thread. It's a genuine observation of how to improve the product and make it even more appealing to different sets of buyers.

Haha, you think I'm riled up? That's pretty sad mate and another useless "observation". It's meaningless because people want it to appeal to them and them alone. It's pretty obvious that the sculptor intended it for use for 40k Imperium armies.

P.S. My original point was that I doubted that people who made these critiques would likely never purchase it even if the sculptor did take their suggestions. That's why their suggestions are meaningless.

This is a discussion forum. People are discussing what they like and don't like about a model. Why be so rude?

Yep, good time to remind everyone that Rule One is Be Polite. Thanks!

Are those claws rounded for posing on the inner side?
With some small pinning they could be made movable i think.

Any shops in Japan that carry your stuff?

Hey! I just finished modern soldier in 28 mm scale. Soon i will add more poses and heads.
I want to make squad of light infantry.

http://orig04.deviantart.net/66ff/f/2015/268/4/6/russian_modern_soldier_by_stranger1988-d9av5xp.jpg

Check it in our site

http://www.albinoravenmini.com/#!light-infantry/c17mr

First off, I was just looking for moderns!!!! You read my mind!

Secondly.....the top half of the guy looks good, but he also looks.....short.

General Hobbs. It s classik 28mm scale proportions.

http://www.albinoravenmini.com/#!light-infantry/c17mr
http://orig07.deviantart.net/dd4a/f/2015/269/1/3/modern_soldier_in_28mm_scale_by_stranger1988-d9axeox.jpg

http://orig04.deviantart.net/0553/f/2015/269/e/5/modern_soldier_in_28mm_scale_by_stranger1988-d9axen3.jpg

Rx- 704 "purifire" Painted by Juhani Lehtimaeki

Absolutely Awesome.
Will buy a couple of the bigger ones as soon as I (re)start an Necromunda campaign.

Oh man, that modern soldier looks amazing!

Mymearan Thanks! I finish squad of modern soldiers in 28mm scale

kendoka Thank you! )

Squad of light infantry - Check them in our store

http://www.albinoravenmini.com/#!light-infantry/c17mr

Wow, those are pretty sweet! The price is respectable too for the fact that they're so detailed and resin and all
I've been putting together a mental order for your site and these guys might just finish it off.. I will probably do head swaps with ski masks to use them for an Arkham Knight themed game but wowzers!

MLaw Thanks , bro!

We start painting this squad )

https://scontent.xx.fbcdn.net/hphotos-xap1/t31.0-8/12113513_447791578738346_2233026477253702732_o.jpg

Red Corsair wrote:Since when does a designer need to do everything for you? There's a reason hobby knives exist lol.

You're absolutely right - there's a reason putty and paper exist too.

Personally, I think the basic problem with the purity seals and other gothicky bits isn't so much that they need trimmed off (and likely a bit of resculpting or refilling) but that it also sends a message: only 40K players need apply. To pot with anyone who wants it for another game.

This is a very nice model, otherwise. I don't have a use or need for it right now, but it's filed away up here for such a time that I do, or if someone else asks. Ditto with the modern russians - not anywhere close to a period I'm interested in, but I can appreciate the high quality of the sculpting.

New miniature in our store.
Heavy power armour "Behemoth" with gatling gun

Alternative model for terminator

Available in our store

http://www.albinoravenmini.com/#!copy-of-melee/c21ff

That's a interesting design! Just the one pose and armament at the moment right?

Oh man, I'm really liking the "modern day" infantry..

The new mech is interesting too.

RiTides Ye ) soon i will add more poses

Vaktathi Thank you!

Our modern soldier, painted by Andrey Demidov

Never mind, conversation has moved on.

Some new stuff. Soldiers in exosuits with different weapons

igg.me/at/albinoravenmini



http://img13.deviantart.net/47e3/i/2015/319/4/7/skifisoldier_03_277_by_stranger1988-d9gtdbe.jpg

New heavy walker cooming soon.
What do you think about this design?
About 85mm height 60mm base
I made spherical joints and It may take different poses

Very nice!
Is that cockpit going to be sized for a 28mm figure? This thing is a beast!

Automatically Appended Next Post:
Aw man.. shame your campaign isn't on KS.. I'd have thrown some cash at it :(
Are you planning on keeping the full range available during the campaign?

I think the feet need to be chunkier. Other than that, it's the sexy.

Good call.. at the very least a tad more thickness. They look like the metal would bend or snap under all that stress at that size.

 insaniak wrote:
I think the feet need to be chunkier. Other than that, it's the sexy.

I agree, needs bigger feet, the mech gives me a front mission vibe

MLaw Thanks! Yes, i will add all stuff on my site when company ends.

insaniak Thank you! I will add alternative feet and other alternative parts in future

New sci fi mini on our site and crowdfunding company page. FR- 340 Hunter
28mm scale 95mm height casted in resin

So it's just under 4" tall? Huh.. I was kinda expecting it to be a bit taller :/

Isn't the cockpit really small for 28mm? Looks more like Mechwarrior scale.

 prowla wrote:

Isn't the cockpit really small for 28mm? Looks more like Mechwarrior scale.

That's how it seems to me.. or maybe 15mm.. which I play and would buy it for..but I was really excited because with that size cockpit, this thing should be a monster when scaled big enough for a person to fit in there.

I'd like to see a scale shot of the Hunter with the other mechs and 28mm miniatures because the information on the website makes it hard to estimate sizes based on the descriptions.

Power Armor "Behemoth" listed 45mm height. It is basically the power armor, which seems sized correctly.

RX-505, RX-807, RX-704 "Purifier" listed 95mm height. But it appears in the images there are two different scale versions of this, or angle is doing a strange thing with heights. It isn't quite power armor, but supposed to be bigger because its basically a life support system, similar to Dreadnoughts.

CF-1 "Firestorm" is a drone, no pilot listed at 85mm height.

FR-340 Hunter is listed at 95mm height. It should be similar size to the RX. So it this another life support system or is it a drone because the description makes it seem like a drone that is remote controlled, "Modern experimental observations systems, first time ever installed on robot work perfectly with..".

I'm guessing the website information isn't completely accurate or that cockpit, isn't really a cockpit but more a camera or view-port for the person on life support similar to the RX.

@Dark Severance - That would be a shame... I could see that reasoning though.. I just wouldn't buy it like that :(

https://cdn2.artstation.com/p/assets/images/images/001/529/626/large/taras-skorobruh-img-2517.jpg?1448043024
Dark Severance Yes. I will add such photos soon

Yeah that cockpit is way out of scale =/

http://orig12.deviantart.net/cab0/f/2015/326/6/9/sizes_by_stranger1988-d9hlza3.jpg

The sizes of our miniatures line in centimeters

That does look like a 10mm or at most 15mm cockpit.

Yes you are right. I will make the robot head for this miniature. To better fit to 28mm scale

 strannik1988 wrote:
Yes you are right. I will make the robot head for this miniature. To better fit to 28mm scale

Hopefully, scaling him up a bit would be part of that plan. I'd love to see that just a tad bigger with a larger cockpit.

MLaw >Hopefully, scaling him up a bit would be part of that plan. I'd love to see that just a tad bigger with a larger cockpit.

Yes, I want to make a larger version in future (20 or 25cm height). But now it is quite expensive for me)

Power armour 28mm scale 45mm height casted in resin

 strannik1988 wrote:
MLaw >Hopefully, scaling him up a bit would be part of that plan. I'd love to see that just a tad bigger with a larger cockpit.

Yes, I want to make a larger version in future (20 or 25cm height). But now it is quite expensive for me)

I can imagine, you've been quite busy!
That would be about 9" or so.. wow.. that's close to a Warhound in height (unless you're counting the antennae). If the price is affordable I would definitely buy one and consider a second one a bit later.

Small promo for our crowdfunding company.
If you like our sci fi miniatures, surprises, gifts this perk especially for you.
For 25$ you will get a random item from the list below.

Check it here.
Igg.me/at/albinoravenmini

]

It's an interesting idea, but I think an 89% chance of saving $5 or less isn't too appealing a trade-off for getting randomly selected minis...

i'm working on new mini. Huge demon beast.
hope you like it.
I think it will be about 65 mm in height (top of head)

https://scontent-arn2-1.xx.fbcdn.net/hphotos-xpa1/v/t1.0-9/12523158_474477799403057_3807452744496579682_n.jpg?oh=41c3e704629c550e5cee4c7cebde0901&oe=570AFA14

http://pre15.deviantart.net/8c5c/th/pre/i/2016/010/c/1/1_by_stranger1988-d9nfcuc.jpg

]http://img14.deviantart.net/e215/i/2016/010/d/3/2_by_stranger1988-d9nfd27.jpg

I think having the wings curve around it a bit more might be nice. Right now it looks rather static

New sci fi mini in our store.

Cruel general, Gerion-slayer and his soldiers are a living embodiment of death. He is probably the most cruel and savage warrior in the whole galaxy. Some says that he is immortal, others – that he is the death itself. For fair, the last thing that his victims see before dying from his scythe is a dark figure against the background of glowing candles.

Ski-fi miniature in 28 mm scale - . 6 parts + 50 mm base.

http://www.albinoravenmini.com/#!gerion-slayer-/c1hg7
https://scontent-ams2-1.xx.fbcdn.net/hphotos-xfa1/t31.0-8/12487257_478367239014113_311530678601620401_o.jpg

Either those are large gates in the legs, or you took the time to sculpt bones......inside a statue

Otherwise nice non-corrupted Primarch you got there

 strannik1988 wrote:


New sci fi mini in our store.

Cruel general, Gerion-slayer and his soldiers are a living embodiment of death. He is probably the most cruel and savage warrior in the whole galaxy. Some says that he is immortal, others – that he is the death itself. For fair, the last thing that his victims see before dying from his scythe is a dark figure against the background of glowing candles.

Ski-fi miniature in 28 mm scale - . 6 parts + 50 mm base.

http://www.albinoravenmini.com/#!gerion-slayer-/c1hg7

Okay, this one got me laughing a bit. First, that description is ridiculous. I mean, you really layed it on thick, no subtly whatsoever, and 'for fair'?

But it's nothing compared to the mini itself, the statue in particular reminded me of this thread:

http://www.dakkadakka.com/dakkaforum/posts/list/677507.page

I figure it's relevant even if it wasn't a GW knock off. That's how a lot of people react, I figure it's worth considering cause again, despite anybody's feelings, the symbolism is is presented with the subtly of a car horn. The legs look like they were sliced by him? What a misogynistic brute!

Maybe if it was done more artfully, it would be more tasteful and less... weird.

 pax macharia wrote:

Okay, this one got me laughing a bit. First, that description is ridiculous. I mean, you really layed it on thick, no subtly whatsoever, and 'for fair'?

It's a stand-in miniature for Death-man the Death Lord, Primarch of the Death Guard. Somewhat over-the-top would seem to be reasonably warranted.

Left hand needs fixing. Aswell as the shaft of the scythe and the drapery on the hood and cloak .

New mini in 28mm scale.
Available on our site

http://www.albinoravenmini.com/#!army/c37r

Modern soldier in 28mm scale

http://www.albinoravenmini.com/#!army/c37r

Those are looking great! I just noticed the size on that big stompy robot from a few posts up lists now at 95mm. Is it still the same size as the previous size picture you posted or did you end up making it a little larger?

Also, because of the colors on the website I almost didn't see the "show more" words on the 28mm section. I would suggest perhaps changing those words to white so they can be more readily seen..

28mm as in "Heroic" 28mm, or 28mm as in ...regular 28mm? Scale reference?

The answer has been edited..

There was a scale picture



The proportions are not heroic (notice the scale of the head, hands and feet, in relation to everything else). The actual height appears to be about 28mm to the eye.. so they are true 28 roughly.

Ah, I remember looking at these ages ago, but the comparison shots on their website are with 40K minis, so I assumed they'd be 28mm scale. For the price as you get 5 soldiers for roughly £18 (sans shipping). Empress' Russian line will net you 8 models for £15.

It doesn't look like they come with arm of head options, bar the addon set. I suppose the Wargames Factory guns would suite, but for the price having some options would be handy instead of ending up with loads of specialist weapons and no AKs. Though my assumption is that people aren't meant to buy tons of these, or care about the options. They'd match along with those Wargames Factory moderns which are in limbo.

Not to bash the stuff though. Hmn, I'm seeing stuff I like in that range. Heh, add something else in there and I may throw some money there way (that Terminator sized mech suit would be an interesting addition to S.T.A.L.K.E.R. games).

Wyrmalla Thanks for you support! Soon will bee more cool stuff)



Our ogr painted by xulutec.blogspot.ru
Realy like this one!

This model available on
http://www.albinoravenmini.com/#!heavyogr/c14re

Our Heavy walker painted by Artemy Rogovoi.
Alternative Conteptor or dreadnought

Hey! We released huge set of models for 3d printing. It is "Puryfire" one of the most popular model on our site and I hope you will be interested to print it. All files prepeared for printing and in right scale.
Heavy complex mech with many cusotm parts. You can download it from our patreon page for 7,5$

patreon.com/AlbinoRavenMini

Also we will create more 40k alternative models every mounth.
Hope you will enjoi it!
Now we working on alternative models for tyranids and chaos