Author |
Message |
 |
|
 |
Advert
|
Forum adverts like this one are shown to any user who is not logged in. Join us by filling out a tiny 3 field form and you will get your own, free, dakka user account which gives a good range of benefits to you:
- No adverts like this in the forums anymore.
- Times and dates in your local timezone.
- Full tracking of what you have read so you can skip to your first unread post, easily see what has changed since you last logged in, and easily see what is new at a glance.
- Email notifications for threads you want to watch closely.
- Being a part of the oldest wargaming community on the net.
If you are already a member then feel free to login now. |
|
 |
![[Post New]](/s/i/i.gif) 2009/01/31 00:41:01
Subject: Best way to weigh down a slota base?
|
 |
Nimble Pistolier
|
In your experiances what is the best way to weigh down a slota base? I am puting together a couple of test tyranids and i am having problems with the gaunts tipping over. Something like a penny works great for a regular round base, but it is a little hard to put that in a slot base. Any help would be greatly appreciated.
|
|
|
 |
 |
![[Post New]](/s/i/i.gif) 2009/01/31 00:43:54
Subject: Re:Best way to weigh down a slota base?
|
 |
Decrepit Dakkanaut
|
yup a nickel works better then a penny, so just take some snips and cut a nickel in half. Youll have to cut a little more off in the middle due to the slot, but glue those in the spaces and youll be good to go.
|
|
 |
 |
![[Post New]](/s/i/i.gif) 2009/01/31 02:50:42
Subject: Best way to weigh down a slota base?
|
 |
Fresh-Faced New User
|
use the scraps from the metal models sprues that holds the metal guys together while they're in the package. If you dont have any a nickle works but have fun trying to get it to stick the the slotta base. Glue dont like Nickles.....
|
|
 |
 |
![[Post New]](/s/i/i.gif) 2009/01/31 15:04:58
Subject: Best way to weigh down a slota base?
|
 |
Lead-Footed Trukkboy Driver
The bit stuck on the side of England. Wales isn't it.
|
I stuffed in some modeling clay for my orks .
|
|
|
 |
 |
![[Post New]](/s/i/i.gif) 2009/01/31 15:07:08
Subject: Best way to weigh down a slota base?
|
 |
Battle-tested Knight Castellan Pilot
|
A bit of fine gravel and PVA glue would work wonders...plus its cheap!
|
Stick to the shadows - Strike from the darkness - Victorus aut Mortis - Ravenguard 1st Company |
|
 |
 |
![[Post New]](/s/i/i.gif) 2009/01/31 15:10:06
Subject: Best way to weigh down a slota base?
|
 |
The Last Chancer Who Survived
|
I got a bag of those little round freshwater fishing weights that you squeeze onto your line for like $1 at kmart. I just take 3 or 4 of them and squeeze em flat with plyers (or you can snip em in half with clippers since lead is soft) then glue them to the underside .. works great  And the lead will be safe as long as you don't lick it.
|
|
|
 |
 |
![[Post New]](/s/i/i.gif) 2009/01/31 16:32:52
Subject: Best way to weigh down a slota base?
|
 |
Bane Knight
|
I use a tube of bb's ($1.20 at walmart) and Elmer's glue ($3 for a big bottle). You can fit about 20 on the bottom and it adds some real weight to it.
|
|
|
 |
 |
![[Post New]](/s/i/i.gif) 2009/01/31 17:37:58
Subject: Re:Best way to weigh down a slota base?
|
 |
Angry Blood Angel Assault marine
|
I just take my clippers and cut out the plastic in the bottom of the base, and make sure to clean it up a bit. I carved/cleaned up and glued nickels in to a 10 man tactical squad in about 10 minutes.
|
Gray Crusaders - 1500 points strong |
|
 |
 |
![[Post New]](/s/i/i.gif) 2009/02/01 14:21:00
Subject: Best way to weigh down a slota base?
|
 |
Splattered With Acrylic Paint
Jackson, MI
|
I find washers that will fit on the underside of the base and I greenstuff over top of it. Sometimes you need something like bolt cutters or a dremel to cut the thicker ones because of how tough they are. I also use little ball bearings or BBs.
|
|
 |
 |
![[Post New]](/s/i/i.gif) 2009/02/01 14:34:27
Subject: Best way to weigh down a slota base?
|
 |
Cold-Blooded Saurus Warrior
|
vodski wrote:I stuffed in some modeling clay for my orks .
That's the way I did it.
It really works  , you should try it.
|
|
 |
 |
![[Post New]](/s/i/i.gif) 2009/02/01 14:37:59
Subject: Re:Best way to weigh down a slota base?
|
 |
Fixture of Dakka
|
Cheap household filler premixed in a tube.
|
|
|
 |
 |
![[Post New]](/s/i/i.gif) 2009/02/01 16:37:11
Subject: Best way to weigh down a slota base?
|
 |
Deadshot Weapon Moderati
Under the Himalaiyan mountains
|
You could use solder, just fill it with lead.
|
"I.. I know my time has come" Tethesis said with a gasp, a torrent of blood flowing from his lips.
"No! Hang on brother!!" Altharius could feel the warmth slip away from his dear sibling's hands
Tethesis's reached out his bloodied arm to Altharius's face.
"I..I have one final request"
Altharius leaned close to listen, tears welling in his once bright eyes.
"make sure th..they put my soulstone in a tank... it'll be... real fethin' cool"
"Yes, you're gonna be the most fethin' cool tank!!" burning hot tears streaked down Altharius's face, as he held his brother's soul in his grasp.
|
|
 |
 |
![[Post New]](/s/i/i.gif) 2009/02/01 19:46:49
Subject: Re:Best way to weigh down a slota base?
|
 |
Nimble Pistolier
|
Wow i cant believe i didnt think of the fishing weights, I have garage full of fishing stuff :( too bad i cant get out more. Thanks for the tips guys!!!!
|
|
|
 |
 |
|