Forum adverts like this one are shown to any user who is not logged in. Join us by filling out a tiny 3 field form and you will get your own, free, dakka user account which gives a good range of benefits to you: No adverts like this in the forums anymore. Times and dates in your local timezone. Full tracking of what you have read so you can skip to your first unread post, easily see what has changed since you last logged in, and easily see what is new at a glance. Email notifications for threads you want to watch closely. Being a part of the oldest wargaming community on the net. If you are already a member then feel free to login now.

Do you know how to easy make combi-plazma for CSM terminators? I wanted to attach plasmagun to TW bolter but It looks crappy...maybe I did sth wrong. Any ideas?

Obliterator Plasma Weaponry and Khorne Berzerker Plasma Pistols work well when slightly shaved down.

there is a bit which comes with the space marine terminator librarian which is a left handed combi bolter plasma (hand and gun), its got a belt fed ammo feed too, very chaosy. you may scour bitz sites and ebay. You could also chop off the hand and make it right handed if you wanted.

To state the obvious here, you can do some very nice conversions gluing together boltguns and plasma pieces if you find the right bits and use a little sense joining them. I have a lot of the 2nd ed Ork bolters I like to use for this because they're a bit bulkier than marine bolters. Just try to keep it looking like a gun ie, bolter barrel stays in line and has a magazine where it could feed it.
I think I made one once by slicing a plastic plasma gun in half so I had the bottom half of the plasma gun (with the barrel tip) Then I cut the top half off of a bolt gun (with the bolter barrel) and glued it on top. Then I stuck the bolter magazine out the side like a Sterling smg

Brotherjulian wrote: To state the obvious here, you can do some very nice conversions gluing together boltguns and plasma pieces if you find the right bits and use a little sense joining them. I have a lot of the 2nd ed Ork bolters I like to use for this because they're a bit bulkier than marine bolters. Just try to keep it looking like a gun ie, bolter barrel stays in line and has a magazine where it could feed it.
I think I made one once by slicing a plastic plasma gun in half so I had the bottom half of the plasma gun (with the barrel tip) Then I cut the top half off of a bolt gun (with the bolter barrel) and glued it on top. Then I stuck the bolter magazine out the side like a Sterling smg

Yeah, the librarian one is basically the two guns cut in half so it looks like a double barreled shotgun basically.

i wouldnt even take plasma guns lololol

Hopefully you can tell how to construct the gun from these pics. Just cut to fit, stick a bunch of stuff together with glue and GS....find a random spike for a bayonet.


Added bonus, not having to construct 2 arms for the DP.

You can use this to make all kinds of crazy weapons. Great for Chaos and Orks.