Author |
Message |
 |
|
 |
Advert
|
Forum adverts like this one are shown to any user who is not logged in. Join us by filling out a tiny 3 field form and you will get your own, free, dakka user account which gives a good range of benefits to you:
- No adverts like this in the forums anymore.
- Times and dates in your local timezone.
- Full tracking of what you have read so you can skip to your first unread post, easily see what has changed since you last logged in, and easily see what is new at a glance.
- Email notifications for threads you want to watch closely.
- Being a part of the oldest wargaming community on the net.
If you are already a member then feel free to login now. |
|
 |
![[Post New]](/s/i/i.gif) 2011/10/05 23:04:35
Subject: Removing parts of my paint
|
 |
Dakka Veteran
|
Hey guys
I have a Rhino I started painting a while back. After a wrong stroke, I had a small line along the hatch I needed to cover up. I did a really clumsy job of it, and it now has what looks like a scar of paint on the hatch. Is there any way to strip the paint of that area only? I know how to clean all of it off, but I'd prefer to not have to start over.
|
|
|
 |
 |
![[Post New]](/s/i/i.gif) 2011/10/05 23:10:32
Subject: Removing parts of my paint
|
 |
Loyal Necron Lychguard
|
Just try and color match the best you can. You can try to scrape it off with a knife but that rarely works well.
|
|
 |
 |
![[Post New]](/s/i/i.gif) 2011/10/05 23:14:45
Subject: Removing parts of my paint
|
 |
The Hive Mind
|
Or, use the knife and gouge out the plastic - battle damage.
|
My beautiful wife wrote:Trucks = Carnifex snack, Tanks = meals. |
|
 |
 |
![[Post New]](/s/i/i.gif) 2011/10/05 23:25:34
Subject: Removing parts of my paint
|
 |
Been Around the Block
Taipei
|
Use a thinner, it will also remove the primer, you can just prime it again with white or black paint depending on your original primer colour and paint over it.
|
|
 |
 |
![[Post New]](/s/i/i.gif) 2011/10/06 00:16:03
Subject: Removing parts of my paint
|
 |
Dakka Veteran
|
essia wrote:Use a thinner, it will also remove the primer, you can just prime it again with white or black paint depending on your original primer colour and paint over it.
Yeah, this sounds like something i'll try. The issue is that it looks like a crack because of the caked paint. But I'll give it a go.
|
|
|
 |
 |
![[Post New]](/s/i/i.gif) 2011/10/06 17:02:37
Subject: Removing parts of my paint
|
 |
Brigadier General
|
Thinner will only work well if the paint or primer are oil enamel based. Nothing wrong with trying, but if you used acrylic paints (GW paints are acrylic) then it probably won't work.
Good Luck!
|
|
|
 |
 |
![[Post New]](/s/i/i.gif) 2011/10/06 18:12:37
Subject: Removing parts of my paint
|
 |
Possessed Khorne Marine Covered in Spikes
The Royal Tunbridge Wells
|
use a fine grain sandpaper to rub away the paint, then mask off the area, prime, and paint
|
|
|
 |
 |
![[Post New]](/s/i/i.gif) 2011/10/06 18:28:44
Subject: Removing parts of my paint
|
 |
Brigadier General
|
That's probably the best solution, though I would advise masking off the area before sanding so you don't mar the surrounding paint.
|
|
|
 |
 |
|