LunaHound wrote:I'll still buy wolf #2 if the wolf can leave the legs off.
It 'll be Moro for my princess mononoke woold elf army -_-

Kroothawk wrote:Here the links to the unmounted Great Wolves (also 22.14 € each):
http://www.shop.microartstudio.com/miniatures-great-wolf-p-418.html
http://www.shop.microartstudio.com/miniatures-great-wolf-p-419.html
http://www.shop.microartstudio.com/miniatures-great-wolf-p-466.html

This model is delivered as a pack, unassembled and unpainted.
The parts of the model are designed to slot together in a way that allows for a quick and
easy assembly. It may be necessary to glue some parts of the model - use PVA (white) glue.
Every model is cut from one or more panels of HDF (high-density fiberboard) of 3mm thickness.
In the package you will find 4 boards.

Set contains of:
2 x high long platform
2 x small short platform
4 x sets of stairs

Length of the whole assembled set:aprox 85cm / 33,5 inch
Height of the highest platform:aprox 12cm / 5 inch
Platform width: aprox 5cm / 2 inch

Attention:
Before taking the elements out make sure they are fully cut. There are minor connections that prevent them from falling out.

The set will consist of foam building, hdf radar, footbridges and resin door.

Approximate size of the foam building:
Length: 25,5cm / 10 inch
Width: 19,5 cm / 7 inch
Height: 7,5 cm / 3 inch

Approximate size of the HDF radar:
Length: 15,5cm / 6 inch
Width: 7,5 cm / 3 inch
Height: 7,5 cm / 3 inch

Anung Un Rama wrote:The new buildings look great, but don't really work with any other kind of 40k terrain I have so far.

kacccper from Micro Art wrote:We're still trying to design a good looking chainmail mould. (...)
Also I want to say that due to the holiday season, we're not able to make immediately tutorials about this product line. But after the Summer I try to make my best to prepare for you photo tutorials: How to use our moulds in the most efficient way.
These moulds were prepared to enable easy customization of your miniature's shoulder pads and leg guards (especially for Terminator models). But you can use those ornaments on any surface.
The ornament surface on shoulder pad module is approx. 1,8cm[0,7"] x 1,28cm[0,5"]
The ornament surface on leg guards module is approx. 1,9cm[0,8"] x 1,6cm[0,6"]
Modeling compound not included.

ok, we have almost ready version of the building for you to see:









As you may see - we added several new things following your suggestions - the windows may be left as you see on the picture - armoured or may be taken out. The same thing applies to door. We tried hard to include the inner walls in the basic set but due to the large number of parts we were unable to fit them on 6 boards :/ They will be the first upgrade set - around 5-7 euro per set approx. We have to make them and check it yet.

An finally we know what the price of the building will be...

Due to the fact that this is a very large kit [6 HDF boards] the price is settled for 24 euro net. Unfortunately we have to add our VAT to it making it exactly 29,52 euro SRP. I hope that despite that the building will be quite popular.

Regards
Jan

Alfndrate wrote:Wow,
I love how everyone hates on BTP... You can only do so much with "generic industrial Sci-Fi catwalks"...

For several reasons (including future attachments, the original building kit will sonn be redesigned to a form not compatible with the original one:
The important thing is - after much input about doing various things with the original Apartment 01 we'll be updating it's design. With the current one some options are to difficult to introduce so we'll be making changes in order for it to fit the new building and other things. It also means that it will not be compatible with the old one. Just a quick heads up.
(...)
The size of the building will stay the same. The most important change is the different roof/floor so the walls of the old buildings will not fit literary with the new roof. It will be always possible to put one building onto another This change make it harder to mix old parts with new one, but the look and fill of the design stay the same. Also the windows are a little bit higher, so you will get more cover out of it. We've also made it possible to have balcony on the right and the left side of the building. All this changes give as possibility to make new type of build.
(...)
New thing. There's going to be also some changes that will make taking off the floors easier.
The one big thing that will not be interchangeble are the floor/roof piece. All else should fit and finished buildings(both old and new) should fit together very well. Also with the new "L" design.

Will the interior walls work with the old buildings?

Absolutely!

Micro Art Studios wrote:As you may (or may not know) Micro Art Studio is a mutual property of Grzegorz Tomaszewski and Sebastian Makowski. Since in the last time they didn't get well with each other a decision to split the company has been made. Due to this fact by the end of June Micro Art Studio will be split into two separate companies.

The one ran by Sebastian Makowski will retain Micro Art Studio name, website, facebook account and license rights to Discworld, Infinity and Wolsung brands.