Forum adverts like this one are shown to any user who is not logged in. Join us by filling out a tiny 3 field form and you will get your own, free, dakka user account which gives a good range of benefits to you: No adverts like this in the forums anymore. Times and dates in your local timezone. Full tracking of what you have read so you can skip to your first unread post, easily see what has changed since you last logged in, and easily see what is new at a glance. Email notifications for threads you want to watch closely. Being a part of the oldest wargaming community on the net. If you are already a member then feel free to login now.

So i'm looking at making some small movement trays for 40k, but my models are all off in storage, and i haven't found any reliable measurements online.

I'm looking for the exact dimensions of a standard 25mm round base. The large (bottom) diameter, the small (top) diameter, and the height of the base.

Any help would be greatly appreciated.

I just measured one -

Width of top of base: 24mm
Width of bottom of base 26mm
Height: 4mm

You must have big millimetres round your way. I'm getting 23mm (I cut most round plasticard toppers for my sculpting corks at 23mm diameter) 25mm and 3mm. Maybe reaching towards 3.5mm for the latter.

I get 23mm across the top, 25mm across the bottom and 4mm high (also the angle of the sloped sides should be about 63.4 degrees from the horizontal)

I know you didn't ask for the slope, but I tried working it out anyway.

Well, I don't want to brag or nuffin'

I also get 23/25mm