Switch Theme:

Cutting plasticard  [RSS] Share on facebook Share on Twitter Submit to Reddit
»
Author Message
Advert


Forum adverts like this one are shown to any user who is not logged in. Join us by filling out a tiny 3 field form and you will get your own, free, dakka user account which gives a good range of benefits to you:
  • No adverts like this in the forums anymore.
  • Times and dates in your local timezone.
  • Full tracking of what you have read so you can skip to your first unread post, easily see what has changed since you last logged in, and easily see what is new at a glance.
  • Email notifications for threads you want to watch closely.
  • Being a part of the oldest wargaming community on the net.
If you are already a member then feel free to login now.




Made in fi
Been Around the Block




Using a saw to cut plasticard creates huge amounts of dust. Are there any better tools to cut it with?
   
Made in us
Legendary Master of the Chapter






Alkaline_Hound wrote:
Using a saw to cut plasticard creates huge amounts of dust. Are there any better tools to cut it with?


Depends on how thick and what kind.

you can often just use a straight edge and a knife to score then snap parts apart.


 Unit1126PLL wrote:
 Scott-S6 wrote:
And yet another thread is hijacked for Unit to ask for the same advice, receive the same answers and make the same excuses.

Oh my god I'm becoming martel.
Send help!

 
   
Made in us
Storm Trooper with Maglight






Georgia

I use a martha stewart paper trimmer. The idea like desubot said is to score the card then snap it.
edit: A nice pair of scissors could work

$12 on amazon
https://www.amazon.com/Martha-Stewart-30069026-Paper-Trimmer/dp/B07DW81M82/ref=asc_df_B07DW81M82/?tag=hyprod-20&linkCode=df0&hvadid=309752546835&hvpos=1o1&hvnetw=g&hvrand=11896982482105684599&hvpone=&hvptwo=&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=9010782&hvtargid=pla-590651694151&psc=1

This message was edited 1 time. Last update was at 2019/12/20 01:59:26


My IG WIP log

40k is as exciting as riding a pony, which doesn't sound very exciting.......

But the pony is 300 feet tall and covered in CHAINSAWS! 
   
Made in us
Dakka Veteran





As above. You can use a picture mattboard cutter and then snap for long straights.

Gentle, multiple cuts with a metal ruler guide and a sharp hobby knife work as well.

Nothing wrong with dust unless you are rolling 100USD Bills and making piles with a credit card and snorting it.

Don't huff the dust.

But sometimes the snapping method doesn't save "dust" as if you need a 90 degree flat edge you will still need to sand the cut.

Consummate 8th Edition Hater.  
   
Made in us
Longtime Dakkanaut





Virginia

Razor blade and a small metal T square but I'm not especially good at cutting plastic. Some of the stuff I see people do out of plastic is amazing with how clean their corners are.
   
Made in gb
Rotting Sorcerer of Nurgle





Portsmouth UK

use the Tamiya scriber - it's ace!
https://www.amazon.co.uk/Tamiya-74091-700-300074091-Plastic-Scriber/dp/B002KKBVTC/ref=sr_1_8?keywords=tamiya+cutter&qid=1576859885&sr=8-8
use with a steel rule with rubber or cork non-slip backing.
To mark up, I use a big thick black marker pen, cover the area I want to cut with black then use a pin held in a pin vice to gently scratch the outline.

Check out my gallery here
Also I've started taking photos to use as reference for weathering which can be found here. Please send me your photos so they can be found all in one place!! 
   
Made in gb
Impassive Inquisitorial Interrogator




U.K.

 bubber wrote:
use the Tamiya scriber - it's ace!
https://www.amazon.co.uk/Tamiya-74091-700-300074091-Plastic-Scriber/dp/B002KKBVTC/ref=sr_1_8?keywords=tamiya+cutter&qid=1576859885&sr=8-8
use with a steel rule with rubber or cork non-slip backing.
To mark up, I use a big thick black marker pen, cover the area I want to cut with black then use a pin held in a pin vice to gently scratch the outline.


I second the Tamiya scriber, its a great tool for working with plastic sheet/strips

3 SPRUUUUUEESSSS!!!!
JWBS wrote:

I'm not going to re-read the lunacy that is the last few pages of this thread, but I'd be very surprised if anyone actually said that. Even that one guy banging on about how relatively difficult it might be for an Inquisitor to acquire power armour, I don't think even that guy said that.
 
   
 
Forum Index » Painting & Modeling
Go to: