Switch Theme:

Do base sizes matter?  [RSS] Share on facebook Share on Twitter Submit to Reddit
»
Author Message
Advert


Forum adverts like this one are shown to any user who is not logged in. Join us by filling out a tiny 3 field form and you will get your own, free, dakka user account which gives a good range of benefits to you:
  • No adverts like this in the forums anymore.
  • Times and dates in your local timezone.
  • Full tracking of what you have read so you can skip to your first unread post, easily see what has changed since you last logged in, and easily see what is new at a glance.
  • Email notifications for threads you want to watch closely.
  • Being a part of the oldest wargaming community on the net.
If you are already a member then feel free to login now.




Made in us
Nurgle Chosen Marine on a Palanquin





Livermore, Ca

My possessed all of them came on 25mm bases, I understand that the new ones are on 40mm bases. In a tournament setting... do I have to upgrade the bases?

Same question, I have a great unclean on that came on a 40mm square base, I have since upgraded to a 60mm round base... the new one sits on a 130mm round base.... does that need to be upgraded?
   
Made in us
Humming Great Unclean One of Nurgle





In My Lab

 Sazzlefrats wrote:
My possessed all of them came on 25mm bases, I understand that the new ones are on 40mm bases. In a tournament setting... do I have to upgrade the bases?

Same question, I have a great unclean on that came on a 40mm square base, I have since upgraded to a 60mm round base... the new one sits on a 130mm round base.... does that need to be upgraded?
25mm to 40mm is probably about the limit of what's okay-though, of course, ask your Tournament Organizer if you are gonna participate.
60mm to 130mm is a BIG deal-though given that GUOs have an aura, it's probably a nerf to you rather than a buff, but still not really accurate to the model. Again, ask your TO if you're playing in a tournament.

If you're playing with friends, just check with them how they want it handled.
   
Made in us
Cackling Daemonic Dreadnought of Tzeentch






Southern New Hampshire

Classic greater daemon models are basically Daemon Princes, now.

She/Her

"There are no problems that cannot be solved with cannons." - Chief Engineer Boris Krauss of Nuln

Kid_Kyoto wrote:"Don't be a dick" and "This is a family wargame" are good rules of thumb.


DR:80S++G++M--B+IPwhfb01#+D+++A+++/fWD258R++T(D)DM+++
 
   
Made in us
Confessor Of Sins





Tacoma, WA, USA

 Sazzlefrats wrote:
My possessed all of them came on 25mm bases, I understand that the new ones are on 40mm bases. In a tournament setting... do I have to upgrade the bases?
Every tournament is different, so this question needs to be directed to the tournament organizer of the tournament in questions.

That being said, it is common for larger tournaments to require models to be mounted on bases of the size supplied for that unit in the kit currently being sold by Games Workshop.
   
Made in gb
Decrepit Dakkanaut




UK

Ask the event organisers is always the best answer because every event is different. Some are super casual, some are super strict. You won't know till you ask them.


In general if you're going to compete I'd expect the standard to be models to the right size and base size for what they currently are as released by GW.

There are a lot of base-adaptors out on the market now that work really well; going up is easy you just get the attachment you need and glue your current base into the expander and its done.


Greater Demons are a touch different because not only did the base size go up but the model increased in size too. This does impact line of slight. As noted above the old Greater Demon models are basically a Demon Prince now in size; the new models are the old Forgeworld sie and are much taller/bigger all round. So chances are you'd be expected to use models of a similar size.

A Blog in Miniature

3D Printing, hobbying and model fun! 
   
Made in us
Morally-Flexible Malleus Hearing Whispers




Why is this a question? I mean, honestly. It literally pops up at least 1-2 times a month. Last time it was slightly less blatant with 32mm-40mm. Now with 25mm-40mm? Why even use bases? Or models? Just tell your opponent your models are on the table. If they can't see them, it's their fault.
   
Made in us
Fixture of Dakka




NE Ohio, USA

FezzikDaBullgryn wrote:
Why is this a question? I mean, honestly. It literally pops up at least 1-2 times a month.


I'm guessing because there's always new/returning players running into this issue who didn't read the previous posts on the subject.
   
Made in us
The Marine Standing Behind Marneus Calgar





Upstate, New York

ccs wrote:
FezzikDaBullgryn wrote:
Why is this a question? I mean, honestly. It literally pops up at least 1-2 times a month.


I'm guessing because there's always new/returning players running into this issue who didn't read the previous posts on the subject.


And there have been conflicting answers over the years. “Use the base the model came with” and “use the size it currently ships with” have both been the correct answer depending who/when you asked.

Add to that, the pros and cons of being on a larger/smaller base largely even out. They will give an edge in one situation and a drawback in another.

If people have put a lot of work into their bases, it’s also a practical question of having to rebase an army. Not a hypothetical, in a perfect world kinda question. But am I going to have to take a knife to finished minis, or get base extenders; the actual work in making it happen question. That can be a huge undertaking. So “does it really mater” is a very important.

And from a game play POV, it’s largely a wash. But some people do have an issue with it, and tournaments definitely do. So check with your opponent/TO. In my experience, most people are fine with whatever you have at the FLGS, but YMMV.

   
Made in gb
Grim Dark Angels Interrogator-Chaplain





Cardiff

There are no rules on base size.

 Stormonu wrote:
For me, the joy is in putting some good-looking models on the board and playing out a fantasy battle - not arguing over the poorly-made rules of some 3rd party who neither has any power over my play nor will be visiting me (and my opponent) to ensure we are "playing by the rules"
 
   
Made in us
Morally-Flexible Malleus Hearing Whispers




 JohnnyHell wrote:
There are no rules on base size.


Yes there is. It's on the box/setup instructions. A current Space Marine comes with an "x"mm base size. All the recent GW event packs now say "Wherever possible, base your models according to their current boxed kit." So no, you can't slide your 2nd edition metal Avatar into a "plays as" current avatar in a matched competitive game, because it's obviously not the current standard. Or even close. In ANY metric. (This is an example, not saying you personally are doing this)
   
Made in us
Captain of the Forlorn Hope





Chicago, IL

FezzikDaBullgryn wrote:
 JohnnyHell wrote:
There are no rules on base size.


Yes there is. It's on the box/setup instructions.
That is not at all in the 40k Rulebook...

"Did you notice a sign out in front of my chapel that said "Land Raider Storage"?" -High Chaplain Astorath the Grim Redeemer of the Lost.

I sold my soul to the devil and now the bastard is demanding a refund!

We do not have an attorney-client relationship. I am not your lawyer. The statements I make do not constitute legal advice. Any statements made by me are based upon the limited facts you have presented, and under the premise that you will consult with a local attorney. This is not an attempt to solicit business. This disclaimer is in addition to any disclaimers that this website has made.
 
   
Made in us
Fixture of Dakka




NE Ohio, USA

FezzikDaBullgryn wrote:
 JohnnyHell wrote:
There are no rules on base size.


Yes there is. It's on the box/setup instructions. A current Space Marine comes with an "x"mm base size.


Having just (finally) built the last of the minis that came in my HH starter box I can tell you for a fact that there's no instructions in that kits assembly guide as to what size of base to use.
Sure, it shows you pics of marines/termies/etc going onto bases. But there's no actual mention of size.
   
Made in us
The Marine Standing Behind Marneus Calgar





Upstate, New York

ccs wrote:
FezzikDaBullgryn wrote:
 JohnnyHell wrote:
There are no rules on base size.


Yes there is. It's on the box/setup instructions. A current Space Marine comes with an "x"mm base size.


Having just (finally) built the last of the minis that came in my HH starter box I can tell you for a fact that there's no instructions in that kits assembly guide as to what size of base to use.
Sure, it shows you pics of marines/termies/etc going onto bases. But there's no actual mention of size.


At least some kits tell you explicit the base size to use, and have a little actual size guide so you know which is which. Not sure how new or widespread that is. GW is getting better at addressing the issue. Of course, there have been times where they sold the same model with different sized bases at the same time, so they don’t exactly have a clean record here.

As to if the build instructions are part of the rules, that’s a MFA/WYSWYG rabbit hole I’m personally tired of going down.

   
Made in gb
Decrepit Dakkanaut




UK

My Deathleaper instructions on the other hand do state the base size.


This is another one of those areas where GW tries to have their cake and eat it whilst trying to change the flavour of the cake each month.



Basically base size does influence gameplay mechanics. Therefore one would assume that the current edition of the rules and the stats that models have; is built around the properties of those models on the table. Including their rough volume (as line of sight is a thing) and their base size.

Therefore any competitive event that's aiming to use the current rules set, will aim to use the current formal base size on models.



This only gets tricky because GW changes base sizes almost on a whim these days and have even had the same model on different base sizes depending on which set you bought them from. Not just when, but which set released at the same time (I recall Tyranid Warriors had at least two base sizes released at the same time at one point).

GW also has made many changes ove the last few editions, mostly in increasing base size on a bunch of models.



Most other games on the market don't really do this at all. They set a base size and that's basically it for the models and model range. Why GW feels the need to do this when their rule design is casual at best in terms of how they put their rules together - its anyone's guess. Sometimes it even feels like picking and packing just changes the size on a whim.



Suffice to say you CAN find out the current base size in a box and most formal events want to be on the current standard which means using what's current.
Casual play is normally more flexible/doesn't care so much.





NOTE there are a few exceptions and the Greater Demons would be an example of this because they got a huge increase in size between their metal/finecast versions and their current plastic ones. At double the size or more they are one of the few examples where the old model does not count at all. Honestly this kind of change is much rarer, most of the time its small scale creep or base size creep that happens;

A Blog in Miniature

3D Printing, hobbying and model fun! 
   
Made in us
The Marine Standing Behind Marneus Calgar





Upstate, New York

I’m pretty sure the base size is set by the modeling team, and they just send it over to the rules team with a “have fun!”

We have things like the neurogaunts have a nodebeast leader type, on a larger base, but no rules to differentiate him. Or units like the sister’s hospitalier with a fallen sister on a silly large base for what she is.

But I agree that base size is a lot of “have cake/eat cake” There are a lot of legacy models out there in the hands of a lot of players. Every time they change base size it generates a lot of bad blood. Invalidating people’s collection is not something to do lightly. On one hand they want rules that work. and base size does impact that. But they want cool looking minis. With new minis comes scale creep and larger bases.

It’s a huge mess, which they largely ignore. It might be in the event pack, but that’s not RAW for general play. There are rules for a specific events. You could read them as RAI, if they are GW events. As binding as any ruling from a TO. By not formalizing it in the core rules they keep things vague enough not to have to deal with legacy models or their own inconsistencies.

   
Made in us
Morally-Flexible Malleus Hearing Whispers




The length of complex mental gymnastics one has to go through for justification on YMDC is astounding.

I literally said "Wherever possible, base your models according to their current boxed kit."

And still people are whipping out examples of "This box of models I bought in 1982 has no instructions!!! Or from a completely different game!

Get over it. Everyone knows the rules, try going to a GW produced major with you casted minis on the wrong base sizes, and see what the organizers say the rules are.

The only reason threads like this exist is so people can seek internet justification for something they already know the answer to, but are unhappy with it. If you have to ask the question, Can I use this? Then you clearly know on some level there is a rules discrepancy somewhere, indicating you can't.
   
Made in us
The Marine Standing Behind Marneus Calgar





Upstate, New York

FezzikDaBullgryn wrote:
The length of complex mental gymnastics one has to go through for justification on YMDC is astounding.

I literally said "Wherever possible, base your models according to their current boxed kit."

And still people are whipping out examples of "This box of models I bought in 1982 has no instructions!!! Or from a completely different game!

Get over it. Everyone knows the rules, try going to a GW produced major with you casted minis on the wrong base sizes, and see what the organizers say the rules are.

The only reason threads like this exist is so people can seek internet justification for something they already know the answer to, but are unhappy with it. If you have to ask the question, Can I use this? Then you clearly know on some level there is a rules discrepancy somewhere, indicating you can't.


Everyone does not know the rules hence the questions. And the fact that there is not a clear RAW in the core rules makes it a valid question.

RAW is silent (unless someone can show me a current core rule citation)
RAI is use the base size of the most current produced model. (IMHO, based on things like GW event packs)
HIWPI for friendly games is use whatever the mini is on. With a few obvious exceptions of drastic scale creep or MFA, base size is mostly a wash, so let just get playing. For organized play check with the TO. Because their opinion is the one that’s relevant to your game, not mine.

   
Made in au
Fresh-Faced New User




For what its worth, i was in the same situation and im rebasing everything. Its a bit frustrating that theres no 'official' verdict but new bases are pretty cheap and you avoid the trouble.
   
Made in de
Battlefield Tourist






Nuremberg

And for what it's worth, I was in the same situation when they originally did the base size changes and decided to drop GW games for games that didn't mandate base sizes at me and then also change the base sizes at a whim.

Won't play GW games again as long as they keep at this.

   
Made in us
Morally-Flexible Malleus Hearing Whispers




This is called forcing the pork. If you're in business with a client that is already locked in, and they are required to complete the sale (i.e. a person in the middle of a real estate sale, or a GW customer locked into a Competitive gaming scene) then you tack on rules they are forced to agree to or back out entirely.

Additional costs on a vehicle AFTER discussing exact cost is one example that Car dealers are famous for. Another is power companies stating a flat rate for power, then adding a "delivery fee" to upcharge the customer. It's capitalism 101, and it SUCKS. But as the late great Joey Stalin said, "Don't hate the player, hate the game."
   
Made in de
Battlefield Tourist






Nuremberg

It's obnoxious whatever it's called!

It's possible to make wargames where base size literally doesn't matter - warlords of erehwon does this by the simple rule that every unit in a squad is involved in a melee when it happens, and then having the max squad size being a bit of a balancing factor there.

If GW knew they were going to shift base sizes, the least they could have done was also shift the rules to accommodate that. Especially given they were simplifying a lot of the rest of the game anyway, and it makes even more sense to have the entire unit involved when most CC troops are carrying pistols or spit acid.

   
Made in gb
Fresh-Faced New User




GW's default answer is whatever sized base you model came with is the corrcet size.

So if you have old school terminators on 25mm baces you don't need to change the baces,

Another example is with the chosen of nergle who where sold on both 28mm and 32mm baces.

The logic runs that smaller bases dosn't realy affect the game, in reallity smaller baces makes the play table effectivly larger as the foot print of your models will be smaller.

This message was edited 2 times. Last update was at 2024/06/01 09:22:07


 
   
 
Forum Index » 40K You Make Da Call
Go to: