Forum adverts like this one are shown to any user who is not logged in. Join us by filling out a tiny 3 field form and you will get your own, free, dakka user account which gives a good range of benefits to you: No adverts like this in the forums anymore. Times and dates in your local timezone. Full tracking of what you have read so you can skip to your first unread post, easily see what has changed since you last logged in, and easily see what is new at a glance. Email notifications for threads you want to watch closely. Being a part of the oldest wargaming community on the net. If you are already a member then feel free to login now.

Stratum Commonwealth is the first MyMiniFactory FronTiers campaign from Corvus Games Terrain, having previously launched six very successful crowdfunded campaigns on Kickstarter. Those included the hobby stations PaintPal and PaintPal Studio, along with the sci-fi terrain campaigns for Tycho Starport, Magna Fortuna, Sector Corvus Prime and Isolation Protocol.
This campaign consists of 28mm - 32mm scale sci-fi 'xenos' inspired printable terrain and extras. Ten buildings are included in the campaign, each incorporating the rounded aesthetic of the commonwealth's xenos style. These are all designed for FDM printing in mind and print without the need for supports. Buildings are hollow inside with removable roofs/upper storeys.

The campaign launches on Wednesday 4th September and runs for 21 days. All files will be available immediately on launch so no waiting around for the campaign to finish and funds to clear like other crowdfunding platforms.



All the components are designed for FDM in mind, and don't require supports. Larger buildings connect together using OpenLOCK clips.
Every backer will also receive FREE vent stacks scatter pieces ideal for area terrain or objectives on the tabletop.




The set contains the following:
The Bunker - prints as two pieces. The roof connects via nubs/holes on the lower building.
Assembled size measures: 189mm x 180mm x 143mm



The Shield Generator - modular - prints as three pieces for a single section. Connects together using OpenLOCK clips. A section is made up of a large Shield Generator body piece, one/two End Caps, one/two Plasma pieces.
Assembled 4 piece Generator size measures: 311mm x 187mm x 162mm



The Drone Station - prints as three pieces. Connects together using OpenLOCK clips. Consists of lower tech section, upper platform, and steps.
Assembled size measures: 188mm x 229mm x 64mm



The Lookout Tower - prints as four pieces. Connects together using OpenLOCK clips. Consists of lower viewing area, upper shaft, clip-in ladder, upper observation platform.
Assembled size measures: 192mm x 199mm x 149mm



The Small Barracks - prints as two pieces. The roof connects via nubs/holes on the lower building.
Assembled size measures: 195mm x 180mm x 167mm



The Overwalk Tower - prints as seven pieces. Connects together using OpenLOCK clips. Consists of lower shaft, clip-in ladder, enclosed observation platform with access hole, observation platform with single exit for walkway, observation platform with double exit for walkway, gantry walkway
Assembled size measures: 407mm x 152mm x 125mm



The Overlook Platform - prints as one piece.
Assembled size measures: 97mm x 198mm x 143mm



The Reclamation Unit - prints as one piece.
Assembled size measures: 156mm x 167mm x 57mm



The Barracks Complex - prints as 12 pieces. Connects together using OpenLOCK clips. Consists of lower barracks building, barracks roof, tunnel lower, tunnel roof.
Assembled size measures: 416mm x 444mm x 71mm



The Outpost Tower - prints as 3 pieces. The roof connects via nubs/holes on the lower building. The antenna connects into the roof using OpenLOCK clips.
Assembled size measures: 184mm x 186mm x 249mm



Join the mailing list and receive early access to the project and the opportunity to take advantage of a special Early Bird discount. Sign up today and get a FREE SENSOR PYLON model on launch.

Stratum Commonwealth is available here