Forum adverts like this one are shown to any user who is not logged in. Join us by filling out a tiny 3 field form and you will get your own, free, dakka user account which gives a good range of benefits to you: No adverts like this in the forums anymore. Times and dates in your local timezone. Full tracking of what you have read so you can skip to your first unread post, easily see what has changed since you last logged in, and easily see what is new at a glance. Email notifications for threads you want to watch closely. Being a part of the oldest wargaming community on the net. If you are already a member then feel free to login now.

Does anyone do these? I've googled, which revealed nothing (though -Disney does clear it up a lot), and checked possible suspects such as Customeeple, MAS, Warsenal etc, but beyond the graffiti transfers MAS do, can't find any. I ask because the DronBots on the box cover have tiny little PanO symbols on the side, which given the skills of the artist are probably freehand but might not be.

Sadly none that I am aware of, you're likely going to have to make up some of your own.

I know of a guy who made some Tohaa ones that you can print up, but never found other factions.

Pretty sure someone on the official forums did some faction specific sheets that could be printed onto transfer paper with faction/ unit logos on it. As for the models i think giraldez freehands most of the markings that are on the models.

I didn't realise decals could be DIYed so effectively, have found CDKs 'Infinity Decals' thread on the official forums. Thanks

I will be speaking to a local printing company, don't think my £30 HP will quite be up to the detail.

There are TWO kinds of decal film (inkjet and laser).
The laser one is preferable to the inkjet one.

That said, even decal papers have quality issues, too. Not all decal papers are equal - but generally, laser ones take less prep time than inkjet ones.

You need GOOD quality laser film AND a good laser printer to get good ones (and the ones that I used to get in model kits were often silkscreened, not done on a printer as such.)

It IS possible to DIY this stuff, but it isn't cheap and there WILL be losses associated with the learning curve. There are also sites that can print stuff for you online - so I'm told.

This is one of those things I really wish Warsenal or one of the other third parties could do for Infinity. I'd buy them in a heartbeat.

 Darkjim wrote:
I didn't realise decals could be DIYed so effectively, have found CDKs 'Infinity Decals' thread on the official forums. Thanks

I will be speaking to a local printing company, don't think my £30 HP will quite be up to the detail.

You could try. I've heard that to get good results, you need to print at an insanely high DPI, like 1200 or something.

I had some custom printed from a guy who does them for model rail roads and model aircraft.

They are a bit pricey, but worth it, as printing them out on my printer resulted in dead dog s#!t.