Poll |
|
|
|
Author |
Message |
|
|
|
Advert
|
Forum adverts like this one are shown to any user who is not logged in. Join us by filling out a tiny 3 field form and you will get your own, free, dakka user account which gives a good range of benefits to you:
- No adverts like this in the forums anymore.
- Times and dates in your local timezone.
- Full tracking of what you have read so you can skip to your first unread post, easily see what has changed since you last logged in, and easily see what is new at a glance.
- Email notifications for threads you want to watch closely.
- Being a part of the oldest wargaming community on the net.
If you are already a member then feel free to login now. |
|
|
2018/03/23 13:25:27
Subject: On models do you like to see drilled/open gun barrels?
|
|
Stabbin' Skarboy
|
Get a sharp bradle, you should no longer find it easy to miss align drilling your barrels - if you do fill them with green stuff and paint the end and move on to the next one lesson learned to be more careful.
|
3500pts1500pts2500pts4500pts3500pts2000pts 2000pts plus several small AOS armies |
|
|
|
2018/03/31 11:36:28
Subject: On models do you like to see drilled/open gun barrels?
|
|
Stubborn Hammerer
Sweden
|
Absolutely, this is a must. Something many fantasy collectors ought to remember for their gunpowder weapons.
|
|
|
|
|
2018/04/19 22:55:11
Subject: Re:On models do you like to see drilled/open gun barrels?
|
|
Death-Dealing Dark Angels Devastator
Sleeping in the Rock
|
I like to see it. For practicality sake I don't do it often, 60 tiny lasguns isn't the easiest thing to drill out. But I appreciate the effort when I see it and if the model has it by default I like it.
|
"In Warfare, preparation is the key. Determine that which your foe prizes the most. Then site your heavy weapons so that they overlook it. In this way, you may be quite sure that you shall never want for targets."
— Lion El'Jonson
"What I cannot crush with words I will crush with the tanks of the Imperial Guard!"
- Lord Commander Solar Macharius
|
|
|
|
2018/05/23 11:25:39
Subject: On models do you like to see drilled/open gun barrels?
|
|
Keeper of the Flame
|
It doesn't affect my life in the slightest. So I'd ideally vote "I don't care" but "it doesn't matter" is more diplomatic.
|
www.classichammer.com
For 4-6th WFB, 2-5th 40k, and similar timeframe gaming
Looking for dice from the new AOS boxed set and Dark Imperium on the cheap. Let me know if you can help.
|
|
|
|
2018/05/23 13:50:18
Subject: Re:On models do you like to see drilled/open gun barrels?
|
|
Veteran Wolf Guard Squad Leader
|
I do it religiously on my own figures. It wouldn't detract too much from my opinion of other people's models, whereas mould lines would. On the other hand its just lazy. I can at least understand unfiled mould lines -as ugly as they are, removing them correctly is time consuming. Whereas drilling a gun barrel is dead simple and takes about 30 seconds. For me its a case of "why the hell would you not do it?"
|
This message was edited 1 time. Last update was at 2018/05/23 13:50:44
I let the dogs out |
|
|
|
2018/05/23 16:30:08
Subject: On models do you like to see drilled/open gun barrels?
|
|
Death-Dealing Devastator
Chicago, IL
|
Drilling out my gun barrels is a must for me. I think the problem is that a lot of people think you need an actual drill to do this, when all you really need to do is place an exacto blade on the center of the barrel and spin the blade around a few times.
|
To those that say there is no stupid questions I say, "Is this a stupid question?" |
|
|
|
2018/05/24 02:50:40
Subject: On models do you like to see drilled/open gun barrels?
|
|
Mutilatin' Mad Dok
|
I have a hobby hand drill and it's easy enough to do, but considering my primary army is orks I'd have somewhere around 200 barrels to drill since 99% of all ork models are equipped with at least a pistol. I just need to find some time to sit down, listen to a podcast, and drill.
|
"The undead ogre believes the sack of pies is your parrot, and proceeds to eat them. The pies explode, and so does his head. The way is clear." - Me, DMing what was supposed to be a serious Pathfinder campaign.
6000 - Death Skulls, Painted
2000 - Admech/Skitarii, Painted |
|
|
|
2018/05/24 08:28:19
Subject: On models do you like to see drilled/open gun barrels?
|
|
[DCM]
Moustache-twirling Princeps
Gone-to-ground in the craters of Coventry
|
Using the correct drill-bit is key. I messed up the plasma pistols on my Van Saar. I might have fixed them with the glue brush and carefully pushing it back into place, but we'll see. That was with a 0.5 mm bit.
Or, just use a sharp knife, as above.
|
This message was edited 1 time. Last update was at 2018/05/24 08:41:19
|
|
|
|
2018/05/28 05:34:32
Subject: On models do you like to see drilled/open gun barrels?
|
|
Torch-Wielding Lunatic
|
drilled my grey knights, drilled my drak angels, drilled my chaos marines, Sisters of battle come pre-drilled, when they come in plastic, will definitely drill them all...
|
|
|
|
|
2018/06/25 00:58:32
Subject: On models do you like to see drilled/open gun barrels?
|
|
Squishy Squig
|
Otherwise it looks like I'm painting miniature LARP'ers. Although it has to be done right, nice and centered not too big not too small.
|
|
|
|
2018/07/25 14:05:20
Subject: On models do you like to see drilled/open gun barrels?
|
|
Fresh-Faced New User
San Diego, CA
|
I think it depends on the model, as some I think you can get away with without a gun barrel (certain plasma weapons come to mind) but most bolster/gun models look better with a barrel.
|
"I've missed years. I can't waste minutes now."
The Piper Never Dies.
Never Dies. |
|
|
|
2018/09/27 13:43:54
Subject: On models do you like to see drilled/open gun barrels?
|
|
Lit By the Flames of Prospero
|
I am not really arsed me, my painting looks gak anyway so having no barrels doesn't make them look any worse.
|
|
|
|
2018/09/27 17:02:36
Subject: On models do you like to see drilled/open gun barrels?
|
|
Fixture of Dakka
|
Either way works for me.
If a mini is sculpted that way, awesome. If you go to that effort, good for you. Personally I'm not going to go to that effort & don't care wether you do or not.
|
|
|
|
2018/09/27 18:09:01
Subject: Re:On models do you like to see drilled/open gun barrels?
|
|
Archmagos Veneratus Extremis
On the Internet
|
I've been back and forth on this in the past and while not drilling them is easier, I feel like drilled barrels just look a bit better. If not drilled, at least a dot of black to suggest an opening is a must for me.
|
|
|
|
2019/04/04 17:59:41
Subject: On models do you like to see drilled/open gun barrels?
|
|
Pyromaniac Hellhound Pilot
|
If gun barrel drilling (or any other methods to make a barrel hole) possible. then yes. a model should have more 'dimensions' and 'realism touch' to it.
|
http://www.dakkadakka.com/dakkaforum/posts/list/408342.page |
|
|
|
2019/04/05 02:37:29
Subject: Re:On models do you like to see drilled/open gun barrels?
|
|
Been Around the Block
|
I would have to say yes to this one. It's certainly a nice addition, but it isn't 100% required for me to enjoy a particular miniature soldier.
|
|
|
|
2019/05/09 05:25:08
Subject: Re:On models do you like to see drilled/open gun barrels?
|
|
Fixture of Dakka
|
Take a third option and play with models where the barrels are too small to drill.
This is only really an issue with larger scale models. As Warhammer and say Warmachine go for more cartoonish proportions for their figures it becomes more evident. As opposed to say having a single model out of your whole collection with a gun large enough to require drilling.
In the case of the scales I work with (28mm typically - true 28mm that is, not "Heroic") outside of tanks you don't really see a barrel anywhere near large enough that even could be drilled reasonable. For 28mm modern miniatures a 30mm autocannon still has a barrel the same width as a pin. In which case with tanks and the like you tend to find the barrels are made from metal or resin, which makes having a simulated drilled barrel simpler to manage.Otherwise they come in two parts or have a separate moulded muzzle brake, so drilling isn't necessary.
To be honest where the barrel isn't either drilled, or at least has a depression to represent the barrel, I'll wind up painting a black circle on the end instead. Though with 1/56-1/48th scale vehicles its the minority of kits that have barrels large enough to drill, or don't already accommodate for this (and where they don't, if its a real issue you can buy a high quality third party metal or resin barrel).
|
|
|
|
2019/10/10 12:51:47
Subject: On models do you like to see drilled/open gun barrels?
|
|
Regular Dakkanaut
|
I can imagine that drilled barrels look awesome, but I don't personally see them as a necessity.
|
For the Emperor and Sanguinius!
40K Blood Angels ; 1,500pts / Kill Team: Valhallan Veteran Guardsmen / Aeronautica Imperialis Adeptus Astartes; 176pts / AoS Soulblight Gravelords; 1,120pts |
|
|
|
2020/01/13 14:32:49
Subject: Re:On models do you like to see drilled/open gun barrels?
|
|
Abel
|
Heh. This just randomly popped up on the Dakka front page for me, so I voted. Then I see it's a thread from 2012.
THREAD NECROMANCY! IT'S ALIVE!
I don't really care if the barrels are drilled out or not.
|
Kara Sloan shoots through Time and Design Space for a Negative Play Experience |
|
|
|
2020/01/14 10:18:43
Subject: On models do you like to see drilled/open gun barrels?
|
|
Frenzied Berserker Terminator
|
I like to see it in the same way that I like to see 4-5 layers of highlighting, wet blending, NMM and OSL. Yes it looks good but I certainly can't be arsed to do it...
|
|
|
|
2020/09/21 11:45:10
Subject: Re:On models do you like to see drilled/open gun barrels?
|
|
Been Around the Block
|
I'd like to see them on the unassembled miniature, with which I mean the design of the parts should be including an open barrel, instead of asking the assembler to drill one. I've seen some minis that already had it open, but definitely not all.
I don't care too much if others do it
|
|
|
|
2020/09/21 17:25:46
Subject: Re:On models do you like to see drilled/open gun barrels?
|
|
Regular Dakkanaut
|
Drilled gun barrels depends on the type of gun. I would not drill a lasgun or shuriken catapult. But otherwise, yes, I like to drill the holes.
|
Henry R. |
|
|
|
2020/09/21 19:05:20
Subject: On models do you like to see drilled/open gun barrels?
|
|
Courageous Questing Knight
|
Venerable Ironclad wrote:Drilling out my gun barrels is a must for me. I think the problem is that a lot of people think you need an actual drill to do this, when all you really need to do is place an exacto blade on the center of the barrel and spin the blade around a few times.
This, 100% exactly.
|
|
|
|
|
2021/01/25 15:13:46
Subject: Re:On models do you like to see drilled/open gun barrels?
|
|
Been Around the Block
|
I think you can easily paint them to look like barrels so it's no big deal.
I don't actually play WH40K, but it wouldn't bother me in the slightest if my opponent rocked up without drilled gun barrels. But if he or she rocked up with them all just painted in metallic paint or something then I would think that was a bit sloppy. Still better than not having painted miniatures at all. I wouldn't be mad at them if they didn't but I would give my preference in playing time to opponents who had put effort into painting and preparing their models well.
|
|
|
|
2021/01/26 10:22:03
Subject: On models do you like to see drilled/open gun barrels?
|
|
Battlefield Tourist
|
I've only tried to do it a couple of times and was unhappy with the end result (off centre holes) so I don't bother any more.
I don't care if anyone else does it, I much prefer a painted army to unpainted and I feel lucky if I am playing against a painted army of any kind.
|
|
|
|
|
2021/01/27 13:20:07
Subject: Re:On models do you like to see drilled/open gun barrels?
|
|
Locked in the Tower of Amareo
|
thegreatchimp wrote:I do it religiously on my own figures. It wouldn't detract too much from my opinion of other people's models, whereas mould lines would. On the other hand its just lazy. I can at least understand unfiled mould lines -as ugly as they are, removing them correctly is time consuming. Whereas drilling a gun barrel is dead simple and takes about 30 seconds. For me its a case of "why the hell would you not do it?"
Damaged barrel when drill is 0.1mm off the center for one.
|
2024 painted/bought: 109/109 |
|
|
|
2021/01/27 15:57:57
Subject: On models do you like to see drilled/open gun barrels?
|
|
Battleship Captain
|
It's easy enough to avoid going off centre with a bit of practice.
Start with a small hole and just go a little way in. If it's off centre use your knife to widen the whole and recentre it. Then drill.
|
|
|
|
2021/03/27 11:58:15
Subject: On models do you like to see drilled/open gun barrels?
|
|
Fresh-Faced New User
|
Eldar shuriken weapons (especially the plastic ones) are usually an exercise in frustration to drill, so I usually leave them be. The old Eavy Metal ones were large enough to do something but you need a real drill to make any headway.
When I first began the hobby, I dulled the tips of many hobby knife blades trying to use them as drills. The pin-vice drill is a good investment if you are OCD about boltgun holes.
|
JD |
|
|
|
2021/03/27 14:02:04
Subject: On models do you like to see drilled/open gun barrels?
|
|
Fresh-Faced New User
Spain
|
I drill all my barrels. The good thing about playing Orks is that you can screw up the drilling and still looks great.
|
This message was edited 1 time. Last update was at 2021/03/27 14:02:20
|
|
|
|
2021/04/17 13:04:09
Subject: On models do you like to see drilled/open gun barrels?
|
|
Fresh-Faced New User
|
Oh, forgot to mention, would you go so far as to drill out the horizontal flash suppressors of the bolt guns? Personally I feel that it is somewhat risky, and begging for a barrel repair conversion. Just one slip of the pinning drill can ruin the tip of the barrel. In fact from experience, I've learned that barrel drilling is best done before painting or assembly as a routine prep step. It is easier to do it in groups. I usually drill all of my loose bolt guns in the bitz bin so that I wont have to worry about them latter, once the minis are assembled/ painted. If any get mucked up, I relegate them to Orks or repurposed conversion weapons.
|
JD |
|
|
|
|