If you're looking for examples of my LED work, please refer to this thread: http://www.dakkadakka.com/dakkaforum/posts/list/358882.page

EDIT: The pics of the commander and the other stuff I've done seem to have disappeared. I'll be trying to locate and re-post those pictures ASAP.

Whatever you want done, I'll magnetize for you. I've done Tyrgon/Mawlocs, Carnifex's, Hive Tyrants (3rd and 4th edition), Tyranid Warriors, SM Sergeants, Predators, Rhinos, Jetbikes, Vypers, Land Speeders, Falcons/Fire Prism/Wave Serpents, Hammerheads/Devilfish, Attack Bikes, Crisis Suits, Broadsides and a Dreadknight. I have pics of examples of my work available as well. If it's a kit that I haven't done yet, have no fear. I stand by and guarantee my work 100%.

Regarding the service, I pride myself on making sure the magnetization that is done can't be seen once the model has all its pieces put on. My service would include all labor involved, the magnets themselves, and the greenstuff work (install, sanding, etc) to cover up the magnet if it's on a spot that could be exposed to someone viewing the model after it's put together. 95% of the time I go magnet-to-magnet for a stronger bond. All magnets used are rare-earth magnets. I 100% guarantee my work. If the magnet comes out for any reason, I'll pay the shipping to fix the model.

WIP pics can be provided if you'd like. If it's a single model I usually slam it out in one sitting, snap some pics to make sure you like the work, then send it on its way. Larger projects would get progress pics done anytime you'd like them. I provide home address, cell phone # and email address. You can text me anytime, and texted pics via my phone can be done instantly if I'm at home. I'm based in Southern Cali.

Lastly, things that aren't included, just so there's no false expectations. I don't fully build the model, I only pop off the pieces from the sprues that I need to do work on. If it's a kit that I already know, you can send me just the pieces that need the work done, saving $$ on shipping. Some minor assembly may happen, but it's usually little stuff (example, gluing the two halves of a predator turret together). Any pieces that are involved in an assembly process I do clean up a bit after removing from the sprue to help guarantee a good fit. Mold lines are removed if my work would make it a pain for you to remove them afterwards. I use either Tamiya plastic glue or GW plastic glue, or super glue, whichever you'd want. I don't prime, nor put any paint to them (nor would you me want to, I'm a SLOW painter ).

Please, feel free to drop me a PM. I work with each person on an individual basis to find out what they want. Sure, I've done Crisis Suits before. Maybe you want the guns in a different spot than most? No problem. We'll get it all worked out.


EDIT: For those of you that don't want to flip through all the pages of the thread, here are the Dreadknight pictures from page 4










Recent commission work below (pics posted on 5/27/12). Discussing work with the owner, we originally planned to go with a 2-peg setup for the destroyers, based on the weight. When I started doing the work and got to the third destroyer, we decided to go for the 3 peg setup that you see below. He loved it so much, he had me re-do the other two as well. I must say, the destroyers are VERY sturdy when setup like that. It's also nice that for storage, the destroyer itself pops off the pegs and can rest 'inside' the pegs, thus no extra room is really taken up by the seperate base.






Latest commission project completed (pics posted 9/20/12). The owner purchased 2 sets of the Forgeworld Valk/Vendetta conversion kits and had me magnetize everything for him. Trying a new thing with these pictures, a bit of 'labelling' to show which parts go where and just how many options this kind of work enables. I hope it makes things a bit clearer!

Shameless bump, and I'll be updating this post with pics of stuff I've done shortly. $0.50 per magnet if you provide the magnet, $0.75 if I'm using my own. Anything "crazy" or hugely custom may or may not be slightly higher, though that can easily be discussed as well. This includes the installation, fit testing, an extra pin if desired to prevent "swing" and I will greenstuff over the magnet to hide it from view whenever possible. Depending on the size of the project I can guarantee a turn-around time in less than a week, usually even quicker than that.

I'll also accept trade, as I am trying to get into Warhammer Fantasy finally. Hordes of Chaos has really caught my eye so if you have something of that nature I'm open to offers as well.

Pics coming!

Some idea of cost, maybe a $/magnet or type of figure would help.

Thanks Ifurita, I've edited my earlier post

My first commission! A Space Marine Commander with all arm options done. Here's a few pics. I'm still learning how to photograph mini's with light sources, ambient light, etc, so I apologize for the not-perfect quality of them. MUCH better than my past attempts though!











I can take pics of a couple magnetized Predators, Attack Bikes, Hive Tyrant (3rd and 4th. 3rd has magnetized wings), Carnifex's, Hammerhead/Ionhead and some other sergeants as well. Feel free to PM me to work anything out.

Recommend you do a quick portfolio shot showing 2 of the options on with the rest of the arms laid out in front of the figure ... with better lighting of course.

By request, thanks Ifurita

Excellent. Looks good.

PM sent Lormax.

PM sent

All pm's responded to, thanks everyone

By the way, do you typically request models assembled or not assembled?

Partial assembly is best, if possible. The commander above was sent to me partially assembled, which was perfect. Most space marine arms just pop right off so thats not a concern. Predators and most other tanks can be cut back apart without too much trouble. Of course, a Carnifex arm thats been glued in with plastic glue is going to take some work getting back out, and may be damaged, so it really all depends on the model itself.

Have you thought about magnetizing and assembling some test figures, like a Tau Crisis suit and selling them on ebay, ready for painting. I'd imagine you could sell one fully magnetized with a basic load out of 5-6 upgrades, and potentially sell some of the others for a small up charge. You could buy bits frames from one of the online retailers and it would be pretty easy to prep those for magnetizing.

I'd pay a reasonable mark up for a fully prepped suit that was assembled/mostly assembled (if people want to position arms and legs) and pre-set up with magnets.

I haven't done that yet, as that's guessing at what people want. Gonna drop you a PM and see what ideas we can explore.

sure. I'd be more than happy to chat with you. A couple of things I can think of off hand are marine heros/leaders and heavy weapons, Tau battle suits, and Tyranid carnifexes. Dreadnaughts might be another possibility.

Why? 1) It seems like those are the units that everyone runs, 2) there is a significant amount of variability how everyone loads out these units, 3) there is significant room for either experimentation or tailoring for specific armies at your LGS, and 4) it's painful to buy an extra unit you might not want to keep. I'd love to play around with a couple of carnifex configurations but I'll be damned if I'm going to spend another $45 doing it. If I could get away with a lot of options for another $20, that could be very attractive.

Had Lormax magnatize the weapons on my vypers and my guardian weapon platforms recently. He did a great job...even got the polarities all lined up so they can be swapped between all 4 without repelling off.

I'm rather new, and don't know much about the game, but whats the point in magnitizing the limbs?

Great service you are providing. Very nice job making model look clean with green stuff.

Good luck.

Default wrote:I'm rather new, and don't know much about the game, but whats the point in magnitizing the limbs?

Many units out there have different options when it comes to weapons or wargear. Using the Commander as an example above, pretty much all of the arm choices you see can be taken by a Commander. Now, would you want to have to paint up (and pay for) 5 or 6 Commanders with the different weapon options, or paint up one Commander and a bunch of seperate arms?

MORE PICS!

One thing these pics have shown me, I need more lighting! I'll be picking up some floodlight type lamps this weekend.

The predator was done with one boxed-set worth of stuff. I know there's only one set of "poles" for the sponson weapons. I custom-make poles for the 2nd set of weapons.

The upside-down Tyrant pic has a gaunt there to show where the tabletop was. It's there mainly to show the strength of the magnets.

The Carnifex pictures at the bottom...the first one is a Dakkafex on the right (double Twin-Linked Devourers) and a Sniperfex on the left (Venom Cannon/Barbed Strangler). You'll note that each weapon on the Sniperfex has been isolated to one side...a mod that I did myself. The 2nd picture I have swapped one set of the weapons amongst them to show off the magnetization. The pics for them suck, I know. I'll fix those ASAP.

Brightened up all of the pics, hopefully the details can be seen on just how useful the magnetizing is, especially for Fexes and such.

Nice stuff. I've been wanting to do this with my Crisis Suits as money has been an issue lately. Once I get some I'll be in contact with you.

Do you do a complete service as well?

By that I mean, I send you a vehicle and you assemble and magnetize all the options?

Or do you want vehicles partially assembled as well?

Thanks!

I can assemble and magnetize, no problem Alpharius.

I'll be picking up the new Land Raider the first day it comes out, so expect to see pics of that as well once I get it.

Latest thing finished. This hammerhead was also gap filled with green stuff with 3-stage sanding.

pretty nice stuff...
i just e-ordered some magnets to do my own stuff,
starting with assault terminator weapons, and later carnifex's...

what do you use to make the holes for the magnets?
and any advice for starting out?

PM sent

Just wanted to thank those of you who have hired me to do some work for you. I'd also like to give others a heads up, I'll be busy with commission work for the next 2-3 weeks so I won't be able to take any jobs during this time. I will post again once I can take on work once more. Thank you

sorry but some people wont feel comfertable with giving you their models as it could be a scam.

very sorry if you have done previous work for others if so

sorry


PLEASE DONT KILL ME!!!

I sent him a Hammerhead turret and a number of battlesuits and had him magnetize all of the hardpoints and weapons. Turned out very nicely and got them back pretty quickly. Too bad I haven't had the chance to paint them.

jamunition wrote:sorry but some people wont feel comfertable with giving you their models as it could be a scam.

very sorry if you have done previous work for others if so

sorry


PLEASE DONT KILL ME!!!

Why would you even post that? It is obvious he has done work for other members with great satisfaction.
I am getting ready to do some nob bikers but I was going to cut a nail to size, drill through the body and insert the nail, and put the magnets in the arms. I figured rare earth magnets would hold onto the nail. I may just get hold of you and see how that works out.

!!!!!



Great looking work Lormax. Not a service I personally require, but good luck!

jamunition wrote:sorry but some people wont feel comfertable with giving you their models as it could be a scam.

very sorry if you have done previous work for others if so

sorry


PLEASE DONT KILL ME!!!

First off, THREADOMANCY IS A BAD THING.
Don't do it.
The dang thing was 3 months old when you dredged it up from the muck.

Second... Why would you question him like that? Especially in his trade thread when you have no evidence of wrong doing. Nice way to drag his name through the mud.

Third: Know that of which you speak.
As has been said, he's done work for a bunch of people here.

I happen to have gotten to know Lormax pretty well. He's a stand up guy.

Eric

Jamunition, any negative feedback concerning Lormax's work would be posted here within minutes of the discovery. Several Dakkites have provided their own accounts of his service above. Just an FYI, not trying to be a hit squad...

You back into production again Lormax, i need you soon ish

GRRR how come I can't see the pics in this thread :-(

Hey while I'm at it, how do you post pics? I've done some neat magnetization and wanted to let you see them.

How much would it be to magnetize a soul grinder at the arms, Between torso and hull and the legs
And would it be at all possible if I sent you the money you bought the the Soul Grinder and then did the job.
BTW Im just thinking about this

how much does it cost to get something magnetized??
do you do super heavy vehicles?? if not got any tips for magnetizing the new shadowsword??

I don't think Lormax is actively looking at this thread. With that being said magnetizing isn't too hard. I just got done doing 2 defilers (all side weapons rotate 360, elevate at least 45 degrees and all weapons are interchangible) and 3 hammerhead/devilfish (as in the burst cannon and hammerhead sensor swap out, both engine assemblies come on and off the vehicle, turret weapon swaps out with railgun/ion cannnon (doesn't need magnetization though, and the side hatches open and close)

What I haven't figured out yet is how to make the landing gear retract. I'm still pefecting the side doors.

If you have time and patience its as easy as pinning a model.

Hi, I am looking for a quote on 2-3rd edition Hive tyrants with the following magnitized weapon options for each.

*2 - TL Devourers (4rth so 4 total per mini)
*1 - Set of Scything Talons
*1 - Set of Lashwhip and Bone Sword (4rth)
*1 - Venom Cannon
*1 - Barbed Strangler

I don't want the weapons to droop

Hey all. Sorry for the long delay in getting back to you, I only just recently got settled back into a working computer, internet, etc etc. Also apologizing for the threadomancy, but since it's my thread anyway...?

Anyway, thanks to those that have posted about the jobs I did for them, especially Ifurita! I was wondering what you had thought about the job

jamunition: I'll be giving you my name, phone number, main email address, my home address...been on Dakka for a number of years and have met the owner of Dakka face to face a number of times. I dunno how else to say I'm not a scammer

Magickal: Thanks man

Squig_Herder: I'm available and my slate is clean. I understand it's been awhile so if you don't need the work done anymore, no problem.

Khorny: Doing the Soul Grinder isn't a problem, and yes I can pick it up for you. What you could also do is order it from some place online, say Maelstrom or Warstore, and have it just shipped directly to me. Previous customers have done that already, worked out great. As far as cost, it would be $6 to magnetize those points, not including legs. I wasn't sure if you wanted each leg to be individually magnetized or not, so I didn't quote that. If you do, add $2 a leg. I provide the magnets and the greenstuff.

Deadly_Chicken: I ask $1 a magnet. I provide the work, the magnet and the greenstuff. The greenstuff will be filed, sanded and smoothed over so you won't even know the magnet is there. Yes, I'll do Super Heavies as well. If you want to tackle it yourself shoot me a PM and I'll be happy to kick around some ideas and help you out.

Sazzlefrats: I'd love to see what you've done. Retracting landing gear I haven't done for anyone yet, but I got some ideas on how to do it. Shoot me a PM, we can brainstorm

Wyomingfox: Qiuck quote is $24. None of the weapons will droop, I test each connection before calling it "done". The Lashwhip and Bonesword will definitely need an extra pin or two to prevent the droop, no extra cost.

For all those that inquired via PM, I'm responding to EVERYONE individually. Thanks again!

PM Sent

Here's a job that I finished recently. This job came to me through one of the painting services that's offered here. Here's some pics of one of the Broadsides that I magnetized up along with one of the stealth suit arms that I did. I ended up doing 6 Broadsides and 3 Stealth arms.

You'll see on the Broadside that both arm options are available. The metal arms wanted to droop at the swivel point so I installed a pin to prevent that from happening. The large railguns are magnetized so that if the owner wants to, he can use the body as a Crisis suit. It also makes storage a bit easier and if the suit happens to get knocked over (common, those damn guns stick out further than you think while playing!), you won't need to reglue the railgun back on. The top of the Railguns are also magnetized so that whatever options the suit has can be attached at the top. The last pic you'll see was taken to show that I wasn't using my fingers to hold the metal arms up and how flat the shoulder still is with the railgun removed. The same body was used in all pics.

If you're interested in having your Broadsides done like this, please contact me via PM. The railguns needed more work than I first anticipated otherwise they'll swivel around and look bad or just fall over because of the weight. Of course, it's all up to the owner on how he ultimately wants them to behave. Underslung arm-mounted railguns can be done as well, again please contact me.











For the stealth suits, the right arm was magnetized to allow the owner to swap weapons on the squad leader (the exact name escapes me) A few shots were taken to show the amount of gap between arm and gun and the strength of the bond. The same arm was used in all pics.

Please be aware, as of 7/14/09 the Swap Shop format for thread post titles has changed. We are correcting new post titles and newly pushed post titles. This post is to make you aware of the changes. Please familiarize yourself with the new guidelines for posting. Dakka Swap Shop - Rules, Guidelines and User Support!

Any questions can be addressed in the Nuts & Bolts forum under the Swap Shop Suggestions/Discussion Thread

Thx for the fix GoFenris.

I'm starting to play around with light effects/LED's. Is this something anyone would be interested in as well? Drop a post in here, I'd like to see what kind of interest there is in it.

Nobody wants turn signals on their land raiders?

Argh, if only my suits weren't all glued already! Looks like some good work

If you really would like your suits done RiTides, I'm pretty sure I can get them done even with them being glued. It won't be the first time that I've performed surgery on an already built model Shoot me a PM, we can discuss what you'd like. Send me over one suit, see how it comes out and decide from there. Hope to hear from ya!

Yeah but they'd have his address, go on holiday and take a slight detour...petrol bomb his house....only if he stole their models mind...please dont try this at home, or at lormax's home come to think of it

I'm so confused

Just a quick Q. or 2 here.

Would it be possible to two magnets into a converted and fully painted daemon prince? (damage not an issue to the paint, can allways go over it)
Only problems being that the wings attatch on about a 5mm size connection, meaning not alot of room.
also, since they are metal and somewhat weighty, is there any possibility of a magnet? (if not ill have to think of a way around it)

Thanks and loving your work so far.

-JD

PMing you JD. I have some questions myself about the model to determine if magnetization alone will work.

deleted

His last login to Bartertown was on 8/27.

He's a pretty "stand up" guy. At this point, I wouldn't worry that you've been ripped off.

Eric

I'm in the same boat, sent him some stuff and haven't heard from him since. He has a lot of good references here, I'm sure he just has something going on right now. Hopefully he'll get back to Dakka soon though.

It must be this time of year. I was planning on getting some work done by him this time last year and then he suddenly stopped returning my emails/pm's so I just dropped it. I know he lives somewhere near me since we'd originally talked about meeting to discuss the work but I'd bank on it being something personal keeping his attention.

I know it's happened to me recently......Beside, he seems to have an excellent track record

I just got off of the phone with Lormax, everything is good . He is currently juggling 3 projects along with taking care of a personal emergency.

Good job, wf.
Thanks for posting for those who needed that information.

Eric

I still haven't heard from Lormax. Anyone else hear anything? Has anybody gotten back the models they sent him yet?

I trust him and all, but its been a month so far with no word.

Thats quite a wait - sent him big stuff Dolemite?

Anyone who has some stuff out there with lormax shoot me a PM. I may be able to help a little with the concerns.

blood angel wrote:Anyone who has some stuff out there with lormax shoot me a PM. I may be able to help a little with the concerns.

Do you know him?
I only ask because he and I get along fairly well, and I can shoot him an email to see if I can get a response that way.

Eric

No, he is a fellow customer who recently talked on the phone with Lormax . But thanks for the offer of help

This Resolved?

Nope. I was told he was supposed to be back last wednesday and would start getting things straightened out. I haven't heard from him yet, and don't know if others have, so I guess we'll see.

I have not heard anything either which is a bit depressing.

Things look grim but based on another user contacting him I have not completely my report with the police.

I understand people running into hard times and having to deal with family but this much time without an email or a phone call in this day and age is a bit crazy.

Hi guys, I reached Lormax on the phone again (weekends around 8-9pm usually work fairly well) and got my monthly update. Anyways, he got home two days ago and will start back on our models. Otherwise, if you want your models back ASAP, you can ask him to ship them to you as is. PM me for his email if you don't have it already.

Any details you can share? Like where he was all that time?

Eric

MagickalMemories wrote:Any details you can share? Like where he was all that time?

Eric

Agreed.

He was in Las Vegas. He took 2 months off of work to attend to his father who was struggling from heart disease and demensia.

So, any word now?

I was thinking of sending some stuff his way, but...

He hadn't started on my figures, so I was going to wait till the 29th before calling him back. Right now I am just holding my breath like the rest, hoping against hope that all things end on a good note. He said his computer was on the fritz so he wouldn't be able to go online.

Hey there all, back at home finally in Los Angeles. All the people that have projects with me have been replied to and given a full update on what happened, then PMed again on an individual basis as well to give personal updates on their projects. If I missed you, please PM me immediately.

To be fair to all, those involved and those thinking about using me to get something done, a quick explanation of what happened. My father was diagnosed with Parkinson's some years ago. This past year things have gotten really bad, to the point that he was moved into assisted living back in March. He had his 3rd heart attack a few months ago this year and now doctors are refusing to give him the operation he needs, fearing he may not survive the procedure. I took the leave of absence from work to help with everything out there (Vegas). I stayed with my mother out there, with no internet. In my hurry to leave I didn't think to bring the commissions with me.

For those thinking about using me to magnetize, I'm not here to steal anyones models, so please use me with confidence. With that said, I won't be taking anything else on until January, unless your project is small and simple (Something like a single dreadnought, etc). Holidays are here and I still have family obligations that'll be taking up my time through most of December.

Please continue to PM me with any requests for quotes, or to bounce some ideas off me about what you have planned or what you'd like to do.

Glad to have you back

Glad to hear from you, and I hope everything works out OK (or as OK as it can) for you and your family.

I am bumping this up to continue the saga. Anyone received their items back yet? I called a couple of times and sent a couple of emails and haven't heard anything yet.

Of course things are a little more urgent now that the nid dex is about to come out but I find it somewhat ironic that I started this project before we even knew there was going to be a new codex!

I sent him a PM/E-mail a while ago (Dec. 15th, to be exact!) asking for a quote on some work.

I still haven't heard back from him...

No news about my models either, I haven't heard anything from Lormax since november.

Quite good Magnitization there.

I do the same thing on ebay (dont worry i'm not going to say username!) and rake in quite a bit, selling most things for about £5 over what I buy them for (which is games workshop rrpp value normally!).

It makes some good side money which I normally buy myself the warhammer with. And it fits into hobby!

I talked to Lormax two weeks ago. Suposedly he had sold his house and just moved into a new location. Our stuff was packed away. I asked him to send pictures of work in progress and gave him my email. But, nothing yet. So sad.

Seems to be a common trend with commissioners lately...

Yep.. still haven't heard anything.

I am trying to be as understanding to whatever he is going through as possible but it takes almost no effort to at least try and reach out to people and say 'still working but I'm tied up'

Yes, at this point it's pretty ridiculous. I sent him my models back in August, so 5 months ago. I wish I could just tell Lormax to send them back, regardless of the condition they're currently in, but it seems that he is unreachable.

Still nothing

i beleve that the lorax is a good honest person and he is just going over a few speed bumps... let time tell the tale.....hahaha jk. umm hes good at what he does.

Lol its funny to watch all the posts saying "Omg where is lormax rawr!" Then he comes back what a classic

I am glad that you find it funny that I have been waiting for my models, which I mailed in August. As it stands, I am out $170.

I have been very patient. I understand that alot has happened to him, but this is just going too far. He should just mail our models back.

It's the internet.. there will always be some idiot that tries to swoop in and say ha-ha (simpson's voice) but this is just dumb.

I completely understand hard times - 100% understand - but when it becomes blatantly apparent that you can't meet your obligation then it is time to send the items back to the people who sent them. That is the classy thing to do.

At this point, I think I'm gonna lock this thread up. Wyomingfox or Dolemite, please feel free to start up a Transaction Report on Lormax if you'd like as that's a better venue of keeping track of who else is having issues contacting Lormax.

Jin, thanks for unlocking the thread.

Regarding outstanding commissions. Wyomingfox had his models sent back awhile ago. Blood Angel received his models back some time ago though there's a loose end in that deal that I overlooked, though we're tying it up right now. Dolemite's models have been sent back to him and a tracking # sent to him.

If any of the above mentioned could chime in to confirm this, it'd be appreciated, as my word probably doesn't mean much.

Would you be up for work from the United Kingdom?

If so, shoot me a PM; we need to talk.

PM sent

Hey, I just wanted to confirm that Lormax did indeed send my models back.

Yes, I can confirm that I got my models back.

How much time is involved in each miini? Are you using a dremel to speed up the process?

I hate to use this answer, but it really all depends on the mini and what I'm doing to it. Doing a Tau crisis suit, magnetizing for all options takes a bit of time. Weapons on a Predator turret on the other hand don't take too long. The greenstuff I let cure overnight so that I can sand it down smooth the following day. I don't know if you'd count the curing time as part of the process though

Yes, I use a dremel to speed things up. There's absolutely no way I'd do all that with a pin vise.

Lormax and I had some outstanding issues from a little while ago.

He has completely made good on them.

I think he has a passion for doing this sort of thing and is getting back into the swing of it.

Latest commission is finished, a magnetized Grey Knights Dreadknight. Got finished pretty late, pictures will be forthcoming when I have some better light. The owner decided to not go with LED's for this model, though I was really hoping to see what I could do with this thing! I'm now available to take on someone's project. Only taking one project at a time now, so as to not get overwhelmed and cause un-needed delays. Feel free to contact me here or PM.

EDIT: Pics taken today. You can see that the pistons are completely movable and are setup to be able to mount whether there is a gun on the arm or not.

Will be leaving on Monday, Jan 9th, for a business trip to Minnesota, won't be able to take any commission until I return. I can still be contacted daily. Expected return date is Jan 20th, possibly as late as the 26th.

I will also be doing my best to update this thread as I arrive/have news of future trips. Smartphone enables daily contact no matter where I am sent.

Back from my work trip as of a couple days ago. I can begin accepting commissions again.

Bump. Finishing up a commission as I type this, will be available for another by Friday.

BLARGH! I cant see the pictures. Do you have a photo album I cant check them out at?

Could do with one of you over in the uk! >.< I would totally be making use of your services, though alas international postage of an army isn't really viable xD costing much more then the service too I'm sure!

How do you go about magnetising your stuff, I know this probably isn't the best place to ask but I can't seem to get even magnetized feet to a base to work.

I'll copy a lot of the pictures over to a Photobucket account that I have and post the link in the first post soon. Probably done in the next couple days.

Sasa0mg, I'll PM you.

Recent commission work pics posted on page 1. I also noticed that a number of pictures are missing from the thread, I'll be trying to locate those and get them re-posted as well.

Big thumbs up for Lormax. I had him magnetize a dreadnaught and two cryx warjacks with all of the options. Extremely reasonable rates and top notch work. Thanks again.

All commissions cleared out. I'm available for work immediately

Latest commission just completed. Pics posted on the first post on page 1.