Author |
Message |
|
|
|
Advert
|
Forum adverts like this one are shown to any user who is not logged in. Join us by filling out a tiny 3 field form and you will get your own, free, dakka user account which gives a good range of benefits to you:
- No adverts like this in the forums anymore.
- Times and dates in your local timezone.
- Full tracking of what you have read so you can skip to your first unread post, easily see what has changed since you last logged in, and easily see what is new at a glance.
- Email notifications for threads you want to watch closely.
- Being a part of the oldest wargaming community on the net.
If you are already a member then feel free to login now. |
|
|
2018/03/20 13:58:25
Subject: Warhammer Community Rumor Engine Thread - page 96 latest hint
|
|
Blood-Drenched Death Company Marine
|
Looks like the exhaust from the back of any dreadnought.
Imperial Squignought.
|
Something is happening on the 24th, we sent you a poster.
|
|
|
|
2018/03/20 15:32:45
Subject: Re:Warhammer Community Rumor Engine Thread - page 96 latest hint
|
|
[MOD]
Decrepit Dakkanaut
Cozy cockpit of an Imperial Knight
|
IMPERIAL KNIGHT EXHAUSTS.
|
Fatum Iustum Stultorum
Fiat justitia ruat caelum
|
|
|
|
2018/03/20 15:45:58
Subject: Warhammer Community Rumor Engine Thread - page 96 latest hint
|
|
Longtime Dakkanaut
|
I feel like we are going to get a new record for time from rumour engine to reveal as gw are probably going to show off the rest of the imperial knights range tomorrow.
|
|
|
|
2018/03/20 16:29:31
Subject: Warhammer Community Rumor Engine Thread - page 96 latest hint
|
|
Preacher of the Emperor
|
The little holes at the top and bottom look like side vents on bolter barrels.
I suspect it's an alternate weapon for the tiny knight.
|
|
|
|
|
2018/03/20 16:31:08
Subject: Warhammer Community Rumor Engine Thread - page 96 latest hint
|
|
Dakka Veteran
South East London
|
Captain Joystick wrote:The little holes at the top and bottom look like side vents on bolter barrels.
I suspect it's an alternate weapon for the tiny knight.
I'm pretty sure the exhaust vents on the plastic Knights have those exact same holes.
|
"Dig in and wait for Winter" |
|
|
|
2018/03/20 16:34:20
Subject: Warhammer Community Rumor Engine Thread - page 96 latest hint
|
|
Ollanius Pius - Savior of the Emperor
Gathering the Informations.
|
Captain Joystick wrote:The little holes at the top and bottom look like side vents on bolter barrels.
I suspect it's an alternate weapon for the tiny knight.
Those are also present on the engines for the Knights.
|
|
|
|
2018/03/20 16:34:49
Subject: Warhammer Community Rumor Engine Thread - page 96 latest hint
|
|
Legendary Master of the Chapter
|
The cowling certainly looks like a imperial knight exaust.
incoming knight codex?!?!?!
|
Unit1126PLL wrote: Scott-S6 wrote:And yet another thread is hijacked for Unit to ask for the same advice, receive the same answers and make the same excuses.
Oh my god I'm becoming martel.
Send help!
|
|
|
|
2018/03/20 16:40:44
Subject: Re:Warhammer Community Rumor Engine Thread - page 97 latest hint
|
|
Is 'Eavy Metal Calling?
|
Flying squid knight
|
LOL, Theo your mind is an amazing place, never change.-camkierhi 9/19/13
I cant believe theo is right.. damn. -comradepanda 9/26/13
None of the strange ideas we had about you involved your sexual orientation..........-Monkeytroll 12/10/13
I'd put you on ignore for that comment, if I could...Alpharius 2/11/14 |
|
|
|
2018/03/20 16:45:44
Subject: Warhammer Community Rumor Engine Thread - page 97 latest hint
|
|
Powerful Phoenix Lord
|
Yeah, I'm 100% in the "SomethingsomethingKnightSide" camp.
|
|
|
|
2018/03/20 16:47:52
Subject: Re:Warhammer Community Rumor Engine Thread - page 97 latest hint
|
|
Ridin' on a Snotling Pump Wagon
|
Squig.
Squig Knight!
It's like Michael Knight, but less 80's.
|
|
|
|
|
2018/03/20 17:05:40
Subject: Warhammer Community Rumor Engine Thread - page 96 latest hint
|
|
Longtime Dakkanaut
|
Desubot wrote:The cowling certainly looks like a imperial knight exaust.
incoming knight codex?!?!?!
I can only hope. If we get multiple Armiger variants I'm gonna drop Benjamins, lol
|
Blood Angels, Custodes, Tzeentch, Alpha Legion, Astra Militarum, Deathwatch, Thousand Sons, Imperial Knights, Tau, Genestealer Cult.
I have a problem.
Being contrary for the sake of being contrary doesn't make you unique, it makes you annoying.
|
|
|
|
2018/03/20 17:43:04
Subject: Warhammer Community Rumor Engine Thread - page 96 latest hint
|
|
Regular Dakkanaut
|
It's the exhaust cowling from the Armiger Warglaive.
You can clearly see this on the 360 view of the Armiger on the GW Webstore.
|
|
|
|
2018/03/20 17:46:33
Subject: Warhammer Community Rumor Engine Thread - page 97 latest hint
|
|
Ridin' on a Snotling Pump Wagon
|
Not much of a rumour then....
This is also much chunkier than the Armiger.
I'm hoping for a modern take on this bad boy...
|
|
|
|
|
2018/03/20 17:46:34
Subject: Warhammer Community Rumor Engine Thread - page 97 latest hint
|
|
[MOD]
Decrepit Dakkanaut
Cozy cockpit of an Imperial Knight
|
frankr wrote:
It's the exhaust cowling from the Armiger Warglaive.
You can clearly see this on the 360 view of the Armiger on the GW Webstore.
No it's not.
|
This message was edited 1 time. Last update was at 2018/03/20 17:46:51
Fatum Iustum Stultorum
Fiat justitia ruat caelum
|
|
|
|
2018/03/20 19:33:32
Subject: Re:Warhammer Community Rumor Engine Thread - page 97 latest hint
|
|
Longtime Dakkanaut
|
Its very close to the exhaust cowling for the existing plastic Imperial Knight. But looking at the rivets and the cut outs at the end of the pipe it seems smaller? The regular Knight has three rivets and two cut outs per pipe. So maybe there is a 2nd smaller IK frame that's not an Armiger variant on the way? But then the Knight only has one of those smaller style pipes(top and bottom of the pic) as part of its stack. So could it be from a new large Imperial Knight with a triple(or more) pipe exhaust? Either way its to close in design to the current Imperial Knights exhaust to IMO be anything other than a third Knight frame in plastic
|
|
|
|
2018/03/20 19:52:53
Subject: Re:Warhammer Community Rumor Engine Thread - page 97 latest hint
|
|
Hubcap
South Carolina, United States
|
GoatboyBeta wrote:Its very close to the exhaust cowling for the existing plastic Imperial Knight. But looking at the rivets and the cut outs at the end of the pipe it seems smaller? The regular Knight has three rivets and two cut outs per pipe. So maybe there is a 2nd smaller IK frame that's not an Armiger variant on the way? But then the Knight only has one of those smaller style pipes(top and bottom of the pic) as part of its stack. So could it be from a new large Imperial Knight with a triple(or more) pipe exhaust? Either way its to close in design to the current Imperial Knights exhaust to IMO be anything other than a third Knight frame in plastic
That is my exact conclusion as well. Also note that on the current knight the perforated heat cowl is divided into three sections whereas this one is only split into two such sections. My inclination is that it will be a medium knight kit--larger than the Armiger but smaller than the current knight. But as you say, there's nothing to rule out an even larger knight with several of these slightly smaller stacks. My suspicion is that there is a higher degree of likelihood of the former rather than the latter.
EDIT (03/22/18): Nope. Well, I was off—turns out it was a MUCH larger knight after all. Oh well. I've been wrong before...
|
This message was edited 3 times. Last update was at 2018/03/22 13:05:13
|
|
|
|
2018/03/20 20:15:26
Subject: Re:Warhammer Community Rumor Engine Thread - page 97 latest hint
|
|
Ollanius Pius - Savior of the Emperor
Gathering the Informations.
|
Brother Xeones wrote:GoatboyBeta wrote:Its very close to the exhaust cowling for the existing plastic Imperial Knight. But looking at the rivets and the cut outs at the end of the pipe it seems smaller? The regular Knight has three rivets and two cut outs per pipe. So maybe there is a 2nd smaller IK frame that's not an Armiger variant on the way? But then the Knight only has one of those smaller style pipes(top and bottom of the pic) as part of its stack. So could it be from a new large Imperial Knight with a triple(or more) pipe exhaust? Either way its to close in design to the current Imperial Knights exhaust to IMO be anything other than a third Knight frame in plastic
That is my exact conclusion as well. Also note that on the current knight the perforated heat cowl is divided into three sections whereas this one is only split into two such sections. My inclination is that it will be a medium knight kit--larger than the Armiger but smaller than the current knight. But as you say, there's nothing to rule out an even larger knight with several of these slightly smaller stacks. My suspicion is that there is a higher degree of likelihood of the former rather than the latter.
Or it could be an even smaller than the Armiger Knight variant that only has one smoke stack and goes "Pew Pew!" with a laser!
The possibilities are endless!
|
|
|
|
2018/03/20 20:26:41
Subject: Warhammer Community Rumor Engine Thread - page 97 latest hint
|
|
Hubcap
South Carolina, United States
|
Sure. Or it could be a Black Gobo riding a Mecha Unicorn (but it probably isn't)
|
|
|
|
2018/03/20 20:39:11
Subject: Re:Warhammer Community Rumor Engine Thread - page 97 latest hint
|
|
Tail-spinning Tomb Blade Pilot
|
Kanluwen wrote: Brother Xeones wrote:GoatboyBeta wrote:Its very close to the exhaust cowling for the existing plastic Imperial Knight. But looking at the rivets and the cut outs at the end of the pipe it seems smaller? The regular Knight has three rivets and two cut outs per pipe. So maybe there is a 2nd smaller IK frame that's not an Armiger variant on the way? But then the Knight only has one of those smaller style pipes(top and bottom of the pic) as part of its stack. So could it be from a new large Imperial Knight with a triple(or more) pipe exhaust? Either way its to close in design to the current Imperial Knights exhaust to IMO be anything other than a third Knight frame in plastic
That is my exact conclusion as well. Also note that on the current knight the perforated heat cowl is divided into three sections whereas this one is only split into two such sections. My inclination is that it will be a medium knight kit--larger than the Armiger but smaller than the current knight. But as you say, there's nothing to rule out an even larger knight with several of these slightly smaller stacks. My suspicion is that there is a higher degree of likelihood of the former rather than the latter.
Or it could be an even smaller than the Armiger Knight variant that only has one smoke stack and goes "Pew Pew!" with a laser!
The possibilities are endless!
... and now Im picturing a stumpy-legged knight barely higher than a spacemarine shooting a lasgun. Thanks for that.
|
|
|
|
2018/03/20 20:43:18
Subject: Warhammer Community Rumor Engine Thread - page 97 latest hint
|
|
Trazyn's Museum Curator
|
I guess you could say it would be a rather squat knight
|
What I have
~4100
~1660
Westwood lives in death!
Peace through power!
A longbeard when it comes to Necrons and WHFB. Grumble Grumble
|
|
|
|
2018/03/20 20:44:18
Subject: Warhammer Community Rumor Engine Thread - page 97 latest hint
|
|
Grim Dark Angels Interrogator-Chaplain
|
Or even a Sister unit to fight alongside in Battle...
|
Stormonu wrote:For me, the joy is in putting some good-looking models on the board and playing out a fantasy battle - not arguing over the poorly-made rules of some 3rd party who neither has any power over my play nor will be visiting me (and my opponent) to ensure we are "playing by the rules" |
|
|
|
2018/03/20 20:45:56
Subject: Warhammer Community Rumor Engine Thread - page 97 latest hint
|
|
Trazyn's Museum Curator
|
Alongside? Nah, the Sister is on top. Like blaster master.
Or maybe the knight is riding the Sister. Its a really small knight, ok?
|
What I have
~4100
~1660
Westwood lives in death!
Peace through power!
A longbeard when it comes to Necrons and WHFB. Grumble Grumble
|
|
|
|
2018/03/20 20:49:34
Subject: Warhammer Community Rumor Engine Thread - page 97 latest hint
|
|
Grim Dark Angels Interrogator-Chaplain
|
So long as it fits on the back of a plastic Thunderhawk...
|
Stormonu wrote:For me, the joy is in putting some good-looking models on the board and playing out a fantasy battle - not arguing over the poorly-made rules of some 3rd party who neither has any power over my play nor will be visiting me (and my opponent) to ensure we are "playing by the rules" |
|
|
|
2018/03/20 20:53:34
Subject: Re:Warhammer Community Rumor Engine Thread - page 97 latest hint
|
|
Longtime Dakkanaut
|
There is a thread over on the B&C AM section http://www.bolterandchainsword.com/topic/343659-ad-mech-vs-necrons-box-in-march/ with a poster who seemed to be fairly accurate on the Forgebane box. He mentions a new Knight coming called the Castellan. A name that was used in the old Epic for a Knight http://warhammer40k.wikia.com/wiki/Knight_Castellan. Considering how the current Knight kit seems to take some inspiration from the old Epic Knight Paladin and Errant models, I'm really hoping he's right about a new version of the Castellan.
|
|
|
|
2018/03/20 20:58:28
Subject: Re:Warhammer Community Rumor Engine Thread - page 97 latest hint
|
|
Commander of the Mysterious 2nd Legion
|
It'd fill an obvious hole in the knight line up, right now we have a light flanker type, the main line trooper... a "heavy mech" varient seems likely.
|
Opinions are not facts please don't confuse the two |
|
|
|
2018/03/20 21:13:29
Subject: Re:Warhammer Community Rumor Engine Thread - page 97 latest hint
|
|
Longtime Dakkanaut
|
BrianDavion wrote:It'd fill an obvious hole in the knight line up, right now we have a light flanker type, the main line trooper... a "heavy mech" varient seems likely.
Doesn't pretty much every single FW knight besides Questoris line qualify as 'heavier' knight though? They are all larger and more powerfully armed than plastic one, sooo...
|
|
|
|
2018/03/20 21:19:20
Subject: Warhammer Community Rumor Engine Thread - page 97 latest hint
|
|
Ancient Venerable Black Templar Dreadnought
Where ever the Emperor needs his eyes
|
Doomrider's back up bike exhaust.
|
|
|
|
2018/03/20 21:59:13
Subject: Re:Warhammer Community Rumor Engine Thread - page 97 latest hint
|
|
Loyal Necron Lychguard
|
Its obviously exhaust for the new motorsquig, for the new buggy kit
|
This message was edited 1 time. Last update was at 2018/03/20 21:59:48
<Dynasty> ~10500pts
War Coven of the Coruscating Gaze ~3000pts
Thrice-Damned Plague Corps ~3250pts
Admech (TBN) ~3500pts +30k Bots and Ulator
|
|
|
|
2018/03/21 02:31:14
Subject: Warhammer Community Rumor Engine Thread - page 97 latest hint
|
|
Fixture of Dakka
|
I would very much like a Knight Castellan with a Quake Cannon
|
"The Omnissiah is my Moderati" |
|
|
|
2018/03/21 04:23:34
Subject: Re:Warhammer Community Rumor Engine Thread - page 97 latest hint
|
|
Pestilent Plague Marine with Blight Grenade
|
It's clearly the exhaust for the Jet bike "Angelus" that the Lion will be riding.
|
"Courage and Honour. I hear you murmur these words in the mist, in their wake I hear your hearts beat harder with false conviction seeking to convince yourselves that a brave death has meaning.
There is no courage to be found here my nephews, no honour to be had. Your souls will join the trillion others in the mist shrieking uselessly to eternity, weeping for the empire you could not save.
To the unfaithful, I bring holy plagues ripe with enlightenment. To the devout, I bring the blessing of immortality through the kiss of sacred rot.
And to you, new-born sons of Gulliman, to you flesh crafted puppets of a failing Imperium I bring the holiest gift of all.... Silence."
- Mortarion, The Death Lord, The Reaper of Men, Daemon Primarch of Nurgle
5300 | 2800 | 3600 | 1600 | |
|
|
|
|