Switch Theme:

Anvilindustry.co.uk - Regiments Dress Uniform Available Now!  [RSS] Share on facebook Share on Twitter Submit to Reddit
»
Author Message
Advert


Forum adverts like this one are shown to any user who is not logged in. Join us by filling out a tiny 3 field form and you will get your own, free, dakka user account which gives a good range of benefits to you:
  • No adverts like this in the forums anymore.
  • Times and dates in your local timezone.
  • Full tracking of what you have read so you can skip to your first unread post, easily see what has changed since you last logged in, and easily see what is new at a glance.
  • Email notifications for threads you want to watch closely.
  • Being a part of the oldest wargaming community on the net.
If you are already a member then feel free to login now.




Made in gb
Lone Wolf Sentinel Pilot





Pawnee, Indiana

Is it cheaper to buy the custom platoon than buying a few different custom squads?

I find the platoon bit kind of overwhelming.

I swear I'm not a paid shill for Anvil Industry. I’d be willing if they wanted to pay me.

"That's Warhammer 40,000 where instead of using Victory Points to determine the victor you roll a D6 and compare receipts. Highest total receipts wins. I'm not sure what the D6 is for." - Abadabadoobaddon, on Reciepthammer 40k

"Actually if the PC/console games have thought us anything most of the noise from bolter fire is the firer yelling for the emperor every shot." - Joyboozer, on silenced bolters.

"It's better to just roll a D6 and discount anything I say on a 3+" - NivlacSupreme, on himself and his sanity. 
   
Made in gb
Dakka Veteran





Evening folks,

@Barzam - I hate to disappoint, the dinosaur was a "that would be cool in the artwork" addition, rather than a concrete plan for an upcoming product.. but if enough people are interested we may get around to it.

@Elbows - The trooper in question is currently standing out in no mans land reciting the Litany of True Aim, and will do so for a further three days before being allowed to rest.

@Gloomy Fenix - perhaps it will be ready before my next birthday? I cant promise anything.


@nivlac - its a little cheaper, but not massively so. As an example a 45 man platoon with no extras would be £112, but £118 if you bought a command squad and 4 10 man squads, again with no extras. There are also some discounts built into extra weapons and equipement.

Essentially, you save some money because its easier for us to pack a larger order of broadly similar models.

If you want to use the platoon builder, you can always email with questions and I will do my best to clarify.


Dress Uniform release coming really soon!!
[Thumb - DressHeads2.jpg]


Creative Director at Anvil Industry. Posting on Dakka in a personal capacity, except in the official Anvil Industry N&R thread.
Anvil Industry Webstore
Anvil Industry Facebook Page with regular updates/news.

 
   
Made in gb
Rough Rider with Boomstick




York (Uni) or Shrewsbury (home), England

I am greatly looking forward to the release of fabulous moustaches

Primary Army: 96th Steel Legion 2nd Company and supporting elements. Led by Captain Kowalski.

Ongoing GW plastics in HH background research thread:
http://www.dakkadakka.com/dakkaforum/posts/list/661198.page#8072577

 Bruticus wrote:
I really just wanted to make this exact model and I don't know what I would do if he turned out to be a smelly, one-legged frog with a shotgun p*nis.
I still don't understand the context of this phrase... but Slaanesh! 
   
Made in au
Painting Within the Lines





Newcastle NSW

Soon we'll be able to re-enact "Carry on up the Kyber". We just need some kilts for the devils in skirts

The Four Winds Tribe has returned to claim the Underhive for House Escher 
   
Made in us
Camouflaged Ariadna Scout




Australia

Anvil I notice that you've got a lot of parts that are interchangeable with Ad-Mech guys, but I am wondering if you'll be making alternate arms, legs, heads or weapons for them that look specifically in their style? I love your Tesla Disintegrator Rifles, and would want to use some for my miniatures, but converting current Skitarii Vanguard to have them holding them would be extremely tricky as their guns are held at different angles, and have the left hand molded permanently to the gun. The arms you have available are great, but look more fleshy and Imperial Guard than android-like. Any chance for some robotic style arms and open robotic hands so we can have a more Ad-Mech look to our conversions? Cheers!

This message was edited 1 time. Last update was at 2017/12/05 04:40:03


 
   
Made in au
Been Around the Block





I'd love to have some mounts for riders which aren't horses.

Anvil - any plan to bring back human scale bionics? I really liked your bionic legs and arms that you used to do.
   
Made in gb
Dakka Veteran





Morning folks,

@Fenriswulf and Plessiez

As you both asking much the same question, Yes we have sculpted a number of regiments bionic leg, arm and head conversion parts, which will be release quite soon.

robotic "rifle arm" sprues to allow an entire unit to carry rifles wit cybernetic arms are planned at some point, but will be in a bionics wave 2 most likely. (Its possible we will get them done for the first wave).


Creative Director at Anvil Industry. Posting on Dakka in a personal capacity, except in the official Anvil Industry N&R thread.
Anvil Industry Webstore
Anvil Industry Facebook Page with regular updates/news.

 
   
Made in us
Camouflaged Ariadna Scout




Australia

Awesome! Gotta love it when parts makers listen to feedback! Looking forward to checking them out when you release them

Edit: If you're also able to make alternate magazines for weapons like the Skitarii Galvanic rifle (more like a Lee Enfield/Transuranic Arquebus one would look good), then I would be even more happy. Not a fan of the revolving cylinder for Skitarii guns.

This message was edited 1 time. Last update was at 2017/12/05 11:41:58


 
   
Made in us
Combat Jumping Ragik





California

Shame, no dinosaurs. Still, I'm eagerly awaiting this release. The sallet helm is unexpected. I guess now we'll be able to make these guys.


   
Made in us
Combat Jumping Ragik





California

Very fancy.


   
Made in es
Guard Heavy Weapon Crewman





Spain

Woah

Just... Woah

DC:90S+G++M--B+IPw40k15#+D++A+/cWD-R+++T(M)DM+
GF's Workshop  
   
Made in us
Mauleed





South Carolina, United States

At first, miss-read the current title of the thread as "Regiments Dress Unicorns coming soon!"


I'm almost a little disappointed to learn I was mistaken. Nice models thought!
   
Made in gb
Blood Angel Terminator with Lightning Claws





United Kingdom

 Barzam wrote:
Very fancy.



Very yes.

   
Made in gb
Rough Rider with Boomstick




York (Uni) or Shrewsbury (home), England

They look great- so much gilt!

Primary Army: 96th Steel Legion 2nd Company and supporting elements. Led by Captain Kowalski.

Ongoing GW plastics in HH background research thread:
http://www.dakkadakka.com/dakkaforum/posts/list/661198.page#8072577

 Bruticus wrote:
I really just wanted to make this exact model and I don't know what I would do if he turned out to be a smelly, one-legged frog with a shotgun p*nis.
I still don't understand the context of this phrase... but Slaanesh! 
   
Made in nl
[DCM]
Indomitable hell rider of glorious renown






102nd Expeditionary Fleet

Hello affordable Praetorians.

Be ash and cinder forevermore!

V - 11 | T - 3 | 敗 - 40

DakkaDakka | Where you thank the mods for baning you! 
   
Made in ca
Never Forget Isstvan!






Canada,Prince Edward Island

Spectacular work coming out of Anvil lately! I'm holding out for the bionics at the moment but those dress uniforms are going to be hard to resist.

Any chance of sneaking some more Ancient style stuff into a later wave? I'm waiting to build my Prospero Spireguard army until someone gives me some nice Assyrian style helms and I suspect that with the dress uniforms and some of the trench fighter stuff I would be able to create something amazing!

Spoiler:



   
Made in au
Fresh-Faced New User




Will we see Necromunda specific parts eventually?
   
Made in at
Rough Rider with Boomstick




UK



Well hello there!


(From a long time Praetorian collector always on the lookout for something new)

   
Made in gb
Dakka Veteran





Evening all,

@Fenriswulf - I'm afraid separate mags in regiments scale is unlikely at the moment. We do some for Exo-Lords which are larger but might work.

@Barzam - Thanks for posting up the photo!

@Commander Cain - Bionics should be out some time in January hopefully (could take longer) They will be the next release after Dress Uniform and the Christmas break.

Thanks for the helmet suggestion. Its unlikely any time soon, but I'll certainly consider it for a future wave.

@Kingrickrich - Generic Gang fighter parts (which we could make without being sued for Trademark infringement :p), are a possibility but not a high priority at the moment.

@Alpheacho - Hello!


Creative Director at Anvil Industry. Posting on Dakka in a personal capacity, except in the official Anvil Industry N&R thread.
Anvil Industry Webstore
Anvil Industry Facebook Page with regular updates/news.

 
   
Made in gb
Lone Wolf Sentinel Pilot





Pawnee, Indiana

 Anvils Hammer wrote:
Evening all,

@Fenriswulf - I'm afraid separate mags in regiments scale is unlikely at the moment. We do some for Exo-Lords which are larger but might work.

@Barzam - Thanks for posting up the photo!

@Commander Cain - Bionics should be out some time in January hopefully (could take longer) They will be the next release after Dress Uniform and the Christmas break.

Thanks for the helmet suggestion. Its unlikely any time soon, but I'll certainly consider it for a future wave.

@Kingrickrich - Generic Gang fighter parts (which we could make without being sued for Trademark infringement :p), are a possibility but not a high priority at the moment.

@Alpheacho - Hello!



Got any exact dates for release?

I swear I'm not a paid shill for Anvil Industry. I’d be willing if they wanted to pay me.

"That's Warhammer 40,000 where instead of using Victory Points to determine the victor you roll a D6 and compare receipts. Highest total receipts wins. I'm not sure what the D6 is for." - Abadabadoobaddon, on Reciepthammer 40k

"Actually if the PC/console games have thought us anything most of the noise from bolter fire is the firer yelling for the emperor every shot." - Joyboozer, on silenced bolters.

"It's better to just roll a D6 and discount anything I say on a 3+" - NivlacSupreme, on himself and his sanity. 
   
Made in gb
Storm Trooper with Maglight





Bath uk

Do you work with Mad robot miniatures at all? because those bearskin heads you put out look almost exactly like the ones mad robot have done, aswell as the turban heads?


RIP Colour Sgt Kell. Forever in our hearts.
Click below for plenty guardsmen

Cadian 404th "The Lost Boys" P&M blog

Tutorial:How to make IG packs
 
   
Made in gb
Dakka Veteran





@Nivlac - No exact date for anything. We have stopped giving out release dates, even rough estimates, because we missed them with such embarrassing frequency!

@STG - Nope we are not affiliated with Mad Robot.

I am aware that they've recently release bearskin and turban heads, but it's a coincidence that ours are coming out around the same time.
There are only so many ways to design a heroic scale bearskin, turban, or any other product based on historical reference files, so its inevitable that some of our products will look very similar.

The same goes for any other company producing human scale parts based on real world stuff


ALL - Ive just put up a competition on our Facebook page, a chance to win 10 of the figures shown below, shipped asap before the main release.

https://www.facebook.com/AnvilIndustry/

and if you want to get all the updates sooner, hit "Like"

Thanks
[Thumb - DressUniform4.jpg]

This message was edited 2 times. Last update was at 2017/12/07 19:00:33


Creative Director at Anvil Industry. Posting on Dakka in a personal capacity, except in the official Anvil Industry N&R thread.
Anvil Industry Webstore
Anvil Industry Facebook Page with regular updates/news.

 
   
Made in de
Angry Blood Angel Assault marine






Fantastic, love the helmet looks a bit like Bavarian from 1870 imho.

Cheers, fantastic work!

Edit: Any chance for tricorns? Chaos Cultists (male and female)?

This message was edited 1 time. Last update was at 2017/12/07 19:07:53


 
   
Made in gb
Rough Rider with Boomstick




York (Uni) or Shrewsbury (home), England

 Iron Angel wrote:
Fantastic, love the helmet looks a bit like Bavarian from 1870 imho.

Cheers, fantastic work!

Edit: Any chance for tricorns? Chaos Cultists (male and female)?


A tricorn was previewed a page or so ago

This message was edited 1 time. Last update was at 2017/12/07 19:17:40


Primary Army: 96th Steel Legion 2nd Company and supporting elements. Led by Captain Kowalski.

Ongoing GW plastics in HH background research thread:
http://www.dakkadakka.com/dakkaforum/posts/list/661198.page#8072577

 Bruticus wrote:
I really just wanted to make this exact model and I don't know what I would do if he turned out to be a smelly, one-legged frog with a shotgun p*nis.
I still don't understand the context of this phrase... but Slaanesh! 
   
Made in de
Angry Blood Angel Assault marine






 Haighus wrote:
 Iron Angel wrote:
Fantastic, love the helmet looks a bit like Bavarian from 1870 imho.

Cheers, fantastic work!

Edit: Any chance for tricorns? Chaos Cultists (male and female)?


A tricorn was previewed a page or so ago


damn thanks
   
Made in gb
Lone Wolf Sentinel Pilot





Pawnee, Indiana

I have done of the entering of the competition

I swear I'm not a paid shill for Anvil Industry. I’d be willing if they wanted to pay me.

"That's Warhammer 40,000 where instead of using Victory Points to determine the victor you roll a D6 and compare receipts. Highest total receipts wins. I'm not sure what the D6 is for." - Abadabadoobaddon, on Reciepthammer 40k

"Actually if the PC/console games have thought us anything most of the noise from bolter fire is the firer yelling for the emperor every shot." - Joyboozer, on silenced bolters.

"It's better to just roll a D6 and discount anything I say on a 3+" - NivlacSupreme, on himself and his sanity. 
   
Made in gb
Lone Wolf Sentinel Pilot





Pawnee, Indiana

It occurs to me that designing a rank system may have been slightly overdoing it.
[Thumb - 5049332A-2CE1-4B63-AC69-188A9E22FFED.jpeg]


I swear I'm not a paid shill for Anvil Industry. I’d be willing if they wanted to pay me.

"That's Warhammer 40,000 where instead of using Victory Points to determine the victor you roll a D6 and compare receipts. Highest total receipts wins. I'm not sure what the D6 is for." - Abadabadoobaddon, on Reciepthammer 40k

"Actually if the PC/console games have thought us anything most of the noise from bolter fire is the firer yelling for the emperor every shot." - Joyboozer, on silenced bolters.

"It's better to just roll a D6 and discount anything I say on a 3+" - NivlacSupreme, on himself and his sanity. 
   
Made in ca
Navigator




Lotusland

Loving your work Anvil. I'm waiting for a recent order in the world, but some of these new bits may well result in more orders soon.

A question for you: are you likely to offer any female parts in the foreseeable future?
   
Made in gb
Lone Wolf Sentinel Pilot





Pawnee, Indiana

 Aesthete wrote:
Loving your work Anvil. I'm waiting for a recent order in the world, but some of these new bits may well result in more orders soon.

A question for you: are you likely to offer any female parts in the foreseeable future?


They’ve said they would before.

I swear I'm not a paid shill for Anvil Industry. I’d be willing if they wanted to pay me.

"That's Warhammer 40,000 where instead of using Victory Points to determine the victor you roll a D6 and compare receipts. Highest total receipts wins. I'm not sure what the D6 is for." - Abadabadoobaddon, on Reciepthammer 40k

"Actually if the PC/console games have thought us anything most of the noise from bolter fire is the firer yelling for the emperor every shot." - Joyboozer, on silenced bolters.

"It's better to just roll a D6 and discount anything I say on a 3+" - NivlacSupreme, on himself and his sanity. 
   
Made in gb
Rough Rider with Boomstick




York (Uni) or Shrewsbury (home), England

 NivlacSupreme wrote:
It occurs to me that designing a rank system may have been slightly overdoing it.

Excellent

Primary Army: 96th Steel Legion 2nd Company and supporting elements. Led by Captain Kowalski.

Ongoing GW plastics in HH background research thread:
http://www.dakkadakka.com/dakkaforum/posts/list/661198.page#8072577

 Bruticus wrote:
I really just wanted to make this exact model and I don't know what I would do if he turned out to be a smelly, one-legged frog with a shotgun p*nis.
I still don't understand the context of this phrase... but Slaanesh! 
   
 
Forum Index » News & Rumors
Go to: