Forum adverts like this one are shown to any user who is not logged in. Join us by filling out a tiny 3 field form and you will get your own, free, dakka user account which gives a good range of benefits to you: No adverts like this in the forums anymore. Times and dates in your local timezone. Full tracking of what you have read so you can skip to your first unread post, easily see what has changed since you last logged in, and easily see what is new at a glance. Email notifications for threads you want to watch closely. Being a part of the oldest wargaming community on the net. If you are already a member then feel free to login now.

Hey guys I recently got an OOP metal Techmarine. The paints been stripped but does anyone have any ideas of how to shine it up? It's a little dingy

Shouldn't matter too much if you're going to paint it, but if you're really interested in shining it, it is the same as any metal.

Dremels often have good shining/cleaning attachments.

Any particular reason you want it shiny?

However, you could try placing it in a box part filled with sand and giving it a good shake. Or use a stiff bristled brush.

As above, I've had a ton of second hand minis that look a little "dingy". Just give them a good wash with a toothbrush in warm soapy water and prime them up. You won't be able to tell.

 SilverMK2 wrote:
Any particular reason you want it shiny?

However, you could try placing it in a box part filled with sand and giving it a good shake. Or use a stiff bristled brush.

I'm just worried that itll show through the paint or will come out "Dingy" looking. It sort of is like an old penny

shauni55 wrote:

 SilverMK2 wrote:
Any particular reason you want it shiny?

However, you could try placing it in a box part filled with sand and giving it a good shake. Or use a stiff bristled brush.

I'm just worried that itll show through the paint or will come out "Dingy" looking. It sort of is like an old penny

That is what primer is for

Polishing isn't necessary, but it's something I like to do, as well. Gives me the absolute smoothest surface for painting and also makes it easier to spot small flaws by reading the reflections under bright light. I've ended up refinishing surfaces that looked initially passable because polishing revealed fine surface pitting that was hard to notice on the initially dull parts.

If you want to remove it, white metal surface oxidation comes off easily - no need for power tools or chemicals. Just give it a light rubbing with fine steel wool or a brass bristled brush (both cheap, readily available at any hardware store). A quick wash to remove lingering dust and oils from handling and they're ready to prime.