Switch Theme:

Legions of a broken coin. A.K.A build as much spend as little. [I'm BACK :D]  [RSS] Share on facebook Share on Twitter Submit to Reddit
»
Author Message
Advert


Forum adverts like this one are shown to any user who is not logged in. Join us by filling out a tiny 3 field form and you will get your own, free, dakka user account which gives a good range of benefits to you:
  • No adverts like this in the forums anymore.
  • Times and dates in your local timezone.
  • Full tracking of what you have read so you can skip to your first unread post, easily see what has changed since you last logged in, and easily see what is new at a glance.
  • Email notifications for threads you want to watch closely.
  • Being a part of the oldest wargaming community on the net.
If you are already a member then feel free to login now.




Made in us
Executing Exarch





Alabama

interesting take ont he warp smith...hmmm gonna ahve to stare at it a while and think on if i like it or not very cool conversion though non the less....hmmmi think some wire wrapped around the green things would be neat jsut a thought though.

at any rate they are looking mighty good man keep it up.
   
Made in gb
Drew_Riggio





Sheffield

I think I will put some actuall green stuff on tees pipes.

Also once I seen on lexicanum entry about Death wheel.
I will quote the whole thing

The Death Wheel is a self-propelled, spike-encrusted siege weapon. When deployed, the wheel careers around the battlefield then finally it charges toward an enemy fortress and crashes through the wall, shooting out all the spikes within it.

I've been thinking about building one later on with few differences in it's design. It is damn shame this idea is not developed further on.

I kinda stuck. I sort of lack ideas how to make more of them and also I have hard times finding most necesary bits, mostly I need some cool looking chaos back packs for my possesd and some other bits and bobs.

I will keep working, but I am worried that they may get more generic.

This message was edited 1 time. Last update was at 2013/09/10 17:33:23


Hello.
Flesh forge here. A Model designer for hire!
3D print and modelling of all kinds.
twitter.com/Flesh_Forge
www.deviantart.com/flesh-forge 
   
Made in gb
Drew_Riggio





Sheffield

I have some minor progress.


That one with chain sword is meant to be a raptor.


Two possessed marines and raptor.




WIP of new bike


and bonus. I want to focus on this thing and arm it, I am going to magnetize it.

Hello.
Flesh forge here. A Model designer for hire!
3D print and modelling of all kinds.
twitter.com/Flesh_Forge
www.deviantart.com/flesh-forge 
   
Made in gb
Morphing Obliterator




Medrengard

Out of bits again dude? No prob, I'm off to gw this weekend for my monthly buying session. I'll see what I can send. Anything you're especially in need of? I think I have some dark vengeance chosen backpacks spare if you're interested. Also I'm scrapping most of my old army for parts, if you don't mind stripping them I can send you some of those bits too.

This message was edited 1 time. Last update was at 2013/09/12 21:20:01


12000 pts
5000pts 
   
Made in gb
Drew_Riggio





Sheffield

Well I have still plenty of construction elements aand un striped minies. Yet I lack four jetpacks, and two chaos packs pacjs for possed. Now I have plenty of good heads but somehow I run out of legs.

Also I dont have any single mealt gun.

I can still manage without them. I am also keep hunting for them in my nearby bits shop yet they are rare. I was just feeling down due certain circumstances at home and my creativity died, I might upload soon something.

Hello.
Flesh forge here. A Model designer for hire!
3D print and modelling of all kinds.
twitter.com/Flesh_Forge
www.deviantart.com/flesh-forge 
   
Made in gb
Morphing Obliterator




Medrengard

I can't help with the jet packs I'm afraid, but I can let you have some (badly painted) back packs, and 4 pairs of vanguard veteran legs from the new pack. Plus I have some other bits going spare. On a more personal note, I hope your home circumstances improve soon dude.

This message was edited 1 time. Last update was at 2013/09/13 18:22:00


12000 pts
5000pts 
   
Made in gb
Drew_Riggio





Sheffield

Well thanks anyway I will keep looking in wargame empruim they might be there one day. Somehow I manage to deplet shoulder pads, and these which you send me before are now reserved for champions/lords

Hello.
Flesh forge here. A Model designer for hire!
3D print and modelling of all kinds.
twitter.com/Flesh_Forge
www.deviantart.com/flesh-forge 
   
Made in us
Contagious Dreadnought of Nurgle





Hell Hole Washington

Cant wait to see some of this painted. Love seeing other peoples creative juices flowing. There are so many minor conversions that i never would have thought of. One of the reasons that i like to buy minis that other people have assembled. Awesome.

Pestilence Provides.  
   
Made in gb
Drew_Riggio





Sheffield

Hi guies I have some progress. I have managed to pull out two new total generic looking CSM new winged sorcerer out of honour guard ultramarine and I practised some with paint. Mostly I was just striping paint from remaining models. Thanks for care mates it means to me a lots.




Both are painted by my mum these are her first painted minis and well take into account it is extremely butcherer mini it did't took too well stripping.

And progres of an attachable chariot to the bike.

Hello.
Flesh forge here. A Model designer for hire!
3D print and modelling of all kinds.
twitter.com/Flesh_Forge
www.deviantart.com/flesh-forge 
   
Made in gb
Drew_Riggio





Sheffield

Hey guys.
Would you like to see how models presents in their units so far?

Hello.
Flesh forge here. A Model designer for hire!
3D print and modelling of all kinds.
twitter.com/Flesh_Forge
www.deviantart.com/flesh-forge 
   
Made in us
Longtime Dakkanaut





44.328850 / -73.110190

Yes, I would.

Your conversions are inspiring and I'll say that as a fellow Chaos modeler / player I am distinctly impressed with how you haven't spent a small fortune on miniatures and are using what you have available (or buying inexpensive beat up models) and the vision you have displayed here epitomizes what I see as Chaos that has been tainted and warped in extreme ways. No cohesion, no 'rank and file'; every model is unique and worth looking at individually. This is a great project, thanks for sharing it.

Subbed and looking forward to seeing more of your work.

This message was edited 1 time. Last update was at 2013/09/20 17:34:00



 Gitsplitta wrote:
That's.... dirt... Skalk. Actual dust. (09/08/2021)
 
   
Made in gb
Drew_Riggio





Sheffield

Hello people.
I have to apologies for lack of update in recent days. Thank you all for support and kind word. When I was starting this I felt as second category person as I could't afford new minies. Now I am fine with this thanks to you kind community of Dakka.

On nearest Monday I start uni and on Sunday I will try to send some pics and army list so far.

Heh in last week half of my mines just fall apart or glue refused to co operate.

Hello.
Flesh forge here. A Model designer for hire!
3D print and modelling of all kinds.
twitter.com/Flesh_Forge
www.deviantart.com/flesh-forge 
   
Made in gb
Drew_Riggio





Sheffield

Hey people.
I have took pictures of most of my army but I won;t send them all at once. Today I am sending you all my bolter csm.
Opinions? Favourites? Only one is painted so far and will be re painted.
I am realy sorry for low quality of photos, on phone they looked fine.

I have forgotten to mention that I have made small investition. I have bought something for 1.80 and I hope to bmake something cool maybe even earn on it about 20 quid. I won't tell what is it but it is tied to warhammer 40 k.





This message was edited 3 times. Last update was at 2013/09/22 21:33:42


Hello.
Flesh forge here. A Model designer for hire!
3D print and modelling of all kinds.
twitter.com/Flesh_Forge
www.deviantart.com/flesh-forge 
   
Made in us
Executing Exarch





Alabama

good start man looking for the next update
   
Made in us
Longtime Dakkanaut






Charleston, SC

Lookin' good. The three at the top are my favorites.

   
Made in gb
Drew_Riggio





Sheffield

Hi. Today I am posting reptilian cultists.



Hello.
Flesh forge here. A Model designer for hire!
3D print and modelling of all kinds.
twitter.com/Flesh_Forge
www.deviantart.com/flesh-forge 
   
Made in us
Longtime Dakkanaut





44.328850 / -73.110190

Reptile Cultists!

My fave CSM are:

top pic right side
middle pic left side
bottom pic right side


Those are the best of the best IMO.


 Gitsplitta wrote:
That's.... dirt... Skalk. Actual dust. (09/08/2021)
 
   
Made in gb
Drew_Riggio





Sheffield

Hey,thanks man.
Does anyome have any ideas about what I could do else in order to make my reptiles look more chaosy ? As just adding spikes is not necesary an aption this time.

This message was edited 1 time. Last update was at 2013/09/24 07:18:31


Hello.
Flesh forge here. A Model designer for hire!
3D print and modelling of all kinds.
twitter.com/Flesh_Forge
www.deviantart.com/flesh-forge 
   
Made in us
Longtime Dakkanaut






Charleston, SC

If you have access to green stuff, you could give them tabards and loin cloths. That may help convey the cultists theme.

   
Made in gb
Drew_Riggio





Sheffield

To be honest, no not yet, I never did anything with it realy. So the results would be quite awfull.

Today I have written a bit of lore, behind my legion. So far it is just a couple of dry facts and it's not layed out too well, it will be here but also on first post.

Enlighten legion
V.0.01



Name: Enlighten legion
Origin: Black Legion
Colour: Different distribution of black and white, with copper rims.
Speciality: Recycling and scavenging , cultists, alliance with many xeno races.
Current leader: Sorcerer Nihalius, speculated to be demon prince.
Homeworld: unknown, speculated to be exterminated forge world.
Alignment: chaos undivided
Allied with: Crimson brotherhood, Alpha Legion, Night lords, several mercenary bands,
Worst enemies: Iron hands, Black Legion, Grey Knights, Red Corsairs
Gene Seeds: Black Legion, Ultra marines, Blood Angels,

Enlighten legion.
Formed by sorcerer Nihialus which, hedonistic sorcerer wanted to achive greatens like every chaos sorcerer. He decided to split away from black legion and form a new legion, powerful enough to destroy lord Abaddon. He never achieved this task, yet he managed to form a strong aliance for several years.
Notable campaigns.
-Invasion on Tarnon III. Tarnon III was small backwater feudal world. It was easy pray for young legion. Planets itself later become arid daemon world. Several champion of Enlighten legion are originated from mentioned planet. This was most successful campaign of Legion and only fully successful one.
- Conquer and extermination of Mechram IV. Mechram IV was small imperial forge world. Beginning of the campaign went in favour of the Legion. Almost whole planet has been quickly converted to chaos, however this world was supplying various space marine chapters on regular basis. Later the chaos break out has been discovered by small Ultramarine force, however whole force has been killed or converted into chaos space marines. However ultramarines managed to send distress call for help and larger forces of Iron Hands arrived. Legion has been broken. Nihailius ordered to retreat into maelstrom. Only few ships managed to get away. The retreating fleet meet it’s destiny from hands of red corsairs which spotted easy prey. Only one capital ship managed to escape red corsairs but it never was seen again in imperial space. This campaign is told to be end of the legion.

This message was edited 1 time. Last update was at 2013/09/24 20:26:49


Hello.
Flesh forge here. A Model designer for hire!
3D print and modelling of all kinds.
twitter.com/Flesh_Forge
www.deviantart.com/flesh-forge 
   
Made in us
Longtime Dakkanaut





44.328850 / -73.110190

That they are bipedal reptilians w/ opposable thumbs makes them stand out as (at very least) Mutants, which are the bastard children of Chaos. But since I know that's not the answer you are looking for modeling-wise, have you considered things like simple icons / plates that they could share in common?

In the end, unless you have *HEAVILY* converted models, someone is always going to say "Hey, look!!! Space Lizards!'





 Gitsplitta wrote:
That's.... dirt... Skalk. Actual dust. (09/08/2021)
 
   
Made in gb
Drew_Riggio





Sheffield

Actually I've been thinking about these lizards as tribe of beast men which joined them, than mutated humans.

Hello.
Flesh forge here. A Model designer for hire!
3D print and modelling of all kinds.
twitter.com/Flesh_Forge
www.deviantart.com/flesh-forge 
   
Made in gb
Drew_Riggio





Sheffield

Hey guies sorry for lack of updates I was bit busy now getting back to it.

I have bought my self Earth shade and sycrax bronze for 4.32
And also pile of bits for 2, sadly non of them are legs and just one chaso backpack.

Also I bought my self warhammer 40 k book titled "eisenhorn" for 1. It is also woth to mention that I have 3rd edition codex for 0.50

Expect photos soon kind poeple.

Hello.
Flesh forge here. A Model designer for hire!
3D print and modelling of all kinds.
twitter.com/Flesh_Forge
www.deviantart.com/flesh-forge 
   
Made in gb
Drew_Riggio





Sheffield

So this is waht I am naged to get for 2 pounds, Worth it in your opinion?


And this is some stuff I am agge to do tahnks to thees new bits.



any thoughts?

Hello.
Flesh forge here. A Model designer for hire!
3D print and modelling of all kinds.
twitter.com/Flesh_Forge
www.deviantart.com/flesh-forge 
   
Made in us
Longtime Dakkanaut





44.328850 / -73.110190

All that for US $3.62? You scored! Power Fist, multiple helms, old Ork Chainsword, backpacks, shoulder pads, etc... yes, good deal for sure. I especially like the arm in the top right holding the WFB Zombie banner staff. You should use it as a 'counts as' Power Maul. Ha.

Looking forward to seeing what you wind up doing with that stuff.


 Gitsplitta wrote:
That's.... dirt... Skalk. Actual dust. (09/08/2021)
 
   
Made in gb
Drew_Riggio





Sheffield

I have have added these chainsaws into my dred's arm.
Over some bits I am still thinking what i could do, but most probably I will just decorate existing ones for now.

Hello.
Flesh forge here. A Model designer for hire!
3D print and modelling of all kinds.
twitter.com/Flesh_Forge
www.deviantart.com/flesh-forge 
   
Made in us
Executing Exarch





Alabama

looking good man...that seems like quite a steal on the bits. im sure something awesome will come out of this lot for sure
   
Made in gb
Drew_Riggio





Sheffield


dread's arm, suited with chanswords.


Just CSM nothing else.


Well what do you think I should give to this guy?

Hello.
Flesh forge here. A Model designer for hire!
3D print and modelling of all kinds.
twitter.com/Flesh_Forge
www.deviantart.com/flesh-forge 
   
Made in gb
Pious Palatine






Some really cool conversions in here. I especially like the bikes.

Keep up the good work.

D
   
Made in us
Longtime Dakkanaut





44.328850 / -73.110190

The Dreadnought claw looks AWESOME and I am -stealing- borrowing that idea for sure. I'll give proper credit for the inspiration.

(looking again)

Wow. That's really cool. You did a great job w/ it. I especially like how the drive rod for the original chain sword now looks like hydraulic pistons. I'm going on and on but I'm genuinely impressed.

Someone might say that you should have flipped the chains so they were inside. No way. The spikes are Chaos adornments. The inside of the claw is where the action is.


 Gitsplitta wrote:
That's.... dirt... Skalk. Actual dust. (09/08/2021)
 
   
 
Forum Index » Dakka P&M Blogs
Go to: