Forum adverts like this one are shown to any user who is not logged in. Join us by filling out a tiny 3 field form and you will get your own, free, dakka user account which gives a good range of benefits to you: No adverts like this in the forums anymore. Times and dates in your local timezone. Full tracking of what you have read so you can skip to your first unread post, easily see what has changed since you last logged in, and easily see what is new at a glance. Email notifications for threads you want to watch closely. Being a part of the oldest wargaming community on the net. If you are already a member then feel free to login now.

Alright, it's hot here in Cali and my place doesn't have AC
But I still need to paint, problem is, the heat dried up my paint fast.
Even on a wet palette it does so
Any advice so I can get some nice blends and not have my paint dry so much in the heat?

I'd try different brands of paint thinner and flow improver; many of those increase the dry time of paints significantly.

As someone who has had to deal with no AC in the heat in the past, I've found better luck painting in the evenings. Makes it take longer as you have less time, but when it's hot out that's the best time you'll get.

Also, if you can, open the doors and windows in the mornings while it's still cool out and close up when it gets hotter. Not really doable if you have a day job like myself, but on weekends or days off, that'll help a tiny bit with the heat.

Someone in Australia on CMON used a tray of ice cubes with foil over the top as a wet palette, the condensation from water vapor in the air kept his paint wet. It never got humid in Coronado when I lived there so you may not have enough ambient humidity to pull that off.

Here in VA we’ve got humidity to spare if you want any...

I wish,, humidity is great.......its SO DRY here in california

 hotsauceman1 wrote:
I wish,, humidity is great.......its SO DRY here in california

Id rather be here in California dry heat than Florida garbage humid heat thanks.

you could always get one of those swamp mist coolers to keep some humidity in your room. or a humidifier or portable AC units.

 hotsauceman1 wrote:
I wish,, humidity is great.......its SO DRY here in california

You’ve never felt Southern humidity, right? It’s not fun going outside and getting swampy before you get to your car...

You in Cali with no Ac? Vat?!!!
Thought it was only a coast thing.

Use a tray of a sort or a plate, and lay down some paper towels down into it (or dish sponge), wet (drench) it with water, and use that wet towel or sponge as your palate to mix your paints on.
Technique for plein-air painters using acrylics.
That is the only cheap way my fellow californian.

Too poor to afford it, I spend it all on models
And my house has no insulation on my side of the house. So it sucks lol

A couple of tricks...
As I used to paint in California Heat and AC drains the moisture out of the air and dries the paint as well... on the brush even.

So.....

Here are my tips and there is no way to make it perfect.

Paint in early morning or late evening
Use a REAL wet pallet that is wetter than normal so much so that under the sponge is liquid water.
Do not paint near or under a vent if AC or near a fan, the air movement will rapid dry the paint.
Use a larger brush. I paint with 2 and 3 brushes.. the reason is the larger bristles are used as a water reservoir.
Use a "wet brush" Dip the brush in clean water and then remove only just enough to prevent the dilution of the paint then paint, clean the brush often and rewet, usually every few minutes, depending on local humidity, airmovement, etc.

It will still have it's challenges but... its doable.