Forum adverts like this one are shown to any user who is not logged in. Join us by filling out a tiny 3 field form and you will get your own, free, dakka user account which gives a good range of benefits to you: No adverts like this in the forums anymore. Times and dates in your local timezone. Full tracking of what you have read so you can skip to your first unread post, easily see what has changed since you last logged in, and easily see what is new at a glance. Email notifications for threads you want to watch closely. Being a part of the oldest wargaming community on the net. If you are already a member then feel free to login now.

Hello I was looking into making painting easier and more fun. I want to invest in an airbrush. I have never bought or used one and am In need of some help.

Can you recommend one for me? something newbie related and I paint mostly 40k models. Badger I heard is good is that true? some mid range in terms of price is ok for me, and is there compressor kits and all in ones.

This is the airbrush that I have used for the last few months: https://www.amazon.com/dp/B0744GXH13?tag=thegeniustable-20&linkCode=ogi&th=1&psc=1
It only goes to 25 psi, which is a bit limiting, but at $40 for the whole kit, it is definitely worth it. Besides the kit, I also got Vallejo's Airbrush Thinner and Cleaner. I just run regular acrylic paints through it, with lots of thinning.

.

So if you're taking your first steps into airbrushing, I'd recommend starting cheap and then investing your cash into a better airbrush.

I bought something pretty similar to this a year or two ago and it's been going strong in conjunction with another airbrush I bought since. That set I linked will give you all you need to get started and it's cheap too, so you don't have to live in fear of breaking a new brush you spent a good chunk of money on. The only issue is replacement parts, but unless you're destroying it, you won't have to worry about that for a while and when you do upgrade you'll have better knowledge of airbrushing and that will help you find what you want in them. The compressor comes with a tank so the noise isn't a constant issue and the compressor itself won't overheat in long painting sessions.

Seeing as you're based in NA, Badger is a good choice as they've got a good reputation and are affordable, even for something like their SOTAR range. Once you pick up the hardware, I'd recommend Vallejo's thinner, flow improver and cleaner to help with acrylics. I would also recommend picking up some paint mixing trays or cups like these as you should consider getting into the good habits of mixing paint outside an airbrush cup. It'll allow you more control and more consistency when mixing paint with the different thinners you might use.

I'm no expert but I have airbrushed a little before. I think you should definitely start cheap, so if you find you reallly can't do it or don't like how it works, you can try soemthing else or just go back to brushes. I would definitely say take your time and learn to properly thin the paints. Having a properly thinned paint is key to a good outcome I have learned.

Since you are looking at a top feed airbrush, mix paints on a pallet or in separate containers before pouring in. And don't put too much. I personally have a bottom feed airbrush because when I actually do use it, I tend to spray A LOT of stuff. Bottom feed airbrushes can hold more paint so if you are planning to like spray an entire like 4000 pt army at a time, that's may be a better way. However, for most people, top feed airbrushes are the best option. They are easier to clean and maintain but a slight margin.