Forum adverts like this one are shown to any user who is not logged in. Join us by filling out a tiny 3 field form and you will get your own, free, dakka user account which gives a good range of benefits to you: No adverts like this in the forums anymore. Times and dates in your local timezone. Full tracking of what you have read so you can skip to your first unread post, easily see what has changed since you last logged in, and easily see what is new at a glance. Email notifications for threads you want to watch closely. Being a part of the oldest wargaming community on the net. If you are already a member then feel free to login now.

Venomthropes. The vents don't fit AT ALLLLLLLLL.

FW Khorne Demon Prince. Soooooooo many tiny spikes and skulls. Also anything metal.

Tiny metal bitz are always a PITA. Hard to pin, leery of just gluing them on. My gf HATESHATESHATES skeletons, I think her VC are going to end up with a lot of ghouls and zombies!


Automatically Appended Next Post:
BTW thanks to mewiththeface for the heads up on the venomthropes.

Perfect grade Gundams... Pain in the ass...

Oh Citadel stuff? Anything large and Eldar like. Lots of spindly arms and legs requiring massive tensile strength...

Drop Pods are my personal least favorite. There is worse, but I won't have to make more than one of most other things, not since those plastic Kans came out...

I have a new one: Flamers of Tzeentch. Irregular joints that consist of TINY ball-and-sockets, and they're a pain in the ass just to get stuck to a BASE.

I had to use masses of GS just to keep them from falling apart when handled - even epoxy wouldn't hold, with contact points as tiny as those. One of them is even GS'd to its base.

The WFB hydra. Would be much easier if I had a dremel, because getting large enough pins in with my tiny pin vice is something I've given up on. Lots of glue and greenstuff is binding the necks to the body.

Mewiththeface wrote:Venomthropes. The vents don't fit AT ALLLLLLLLL.

Surprisingly, my venomthrope stays together! However the same cannot be for my zoanthrope.... It isn't, as you'd expect it to be, that oversized head of its not attaching to the body, its standing it up on the base. I'll be playing a game with my 'nids and suddely *crash* "ah, that'll be the zoan again...."

Other models i hate is the DE war hydra! Grrrr! Hate that thing! Grrr!

The DE black guard annoy me because they are supplied with diagonal slit bases, this means that your entire unit either faces left, or right. It's stupid! Black guard champion: "Right, chaps, let's advance on this unit of spearmen while looking at that nice chariot over there!" So annoying.

Tbh, metal models that are big than a normal man sized figure just annoy me, plastic is far better.

Immortals...just immortals. Everything about them is wrong. Also sonic weaponry was a little annoying.

Thunderfire cannon because of reasons already stated in:

http://www.dakkadakka.com/dakkaforum/posts/list/288621.page

+ loads of model related tales of pain and annoyance contained within.

nosferatu1001 wrote:Old metal daemon prince. Gah.

From fantasy - Scrap launcher. You need 5 hands to keep everything in place, and it turns to scrap unless every single jiont is pinned.

damm right mate, plus the thing is so sharp with the spikes and all that.

Ork burnaz. it seems that the plastic pieces never fit just right, or you get a good fit, but then you can't fit a head on the model.

My vandetta hands down. I hated every monent of using the horrible instructions and holding down pieces for ten minutes than watch in horror as it slowly fell down.

Metal Dwarf Gyrocopter, wait is this a 40k forum?


Automatically Appended Next Post:
Metal Dwarf Gyrocopter, wait is this a 40k forum?

Zoanthropes and the hands of Obliterators. I mean, are the weapon sprues for the oblits even remotely sized for the little finger sockets?