Forum adverts like this one are shown to any user who is not logged in. Join us by filling out a tiny 3 field form and you will get your own, free, dakka user account which gives a good range of benefits to you: No adverts like this in the forums anymore. Times and dates in your local timezone. Full tracking of what you have read so you can skip to your first unread post, easily see what has changed since you last logged in, and easily see what is new at a glance. Email notifications for threads you want to watch closely. Being a part of the oldest wargaming community on the net. If you are already a member then feel free to login now.

I have plenty of storage for my Space Marines and Genestealers, but I don't have anything for 4 larger models. Those 4 are a Librarian Dreadnought, a Maleceptor, a Foetid Bloat Drone, and a Helbrut.

I don't foresee needing to store any more models of that size anytime soon. I've looked on Amazon and on ebay, but mostly I'm just finding cases for smaller figures.

Is there a good case out there that would be just about right for those 4 models to all go into securely?

I keep quite a bit of large models in my BattleFoam 432. I filled it with 3" pluck foam. I was able to get 2 rhinos, 2 predator, land raider, 2 hellbrutes in two layers. I believe you can get 3 layers of the 3" pluck in that case.

KR multicase soft foam good for tight fit robust models with lots of custom variations, battlefoam hard foam good for spikey models like dark eldar. Sabol army transport are good pluck out foam for odd models. GW zigzag case are good for odd large infantry models.

Go to a hardware store and check out the tool cases and bits boxes. There is usually something there to suit and kind of model.

 Flinty wrote:
Go to a hardware store and check out the tool cases and bits boxes. There is usually something there to suit and kind of model.

+1 to this. I scored some large power tool cases that my Lowe's was going to toss, as they were from old tool displays. One was a large Bosch plastic case (I think was for a large hammer drill) that with just a bit of trimming inside and some thin foam turned out to be an excellent case.

Gun cases work great too, and they're relatively cheap. The double stacked pistol cases from Plano could fit those 4 and then some, with a little bit of cutting on the foam. They're only about $20.

Thanks everyone. I'll check Lowes and Home Depot and see what I can find to put some foam into.