Author |
Message |
|
|
|
Advert
|
Forum adverts like this one are shown to any user who is not logged in. Join us by filling out a tiny 3 field form and you will get your own, free, dakka user account which gives a good range of benefits to you:
- No adverts like this in the forums anymore.
- Times and dates in your local timezone.
- Full tracking of what you have read so you can skip to your first unread post, easily see what has changed since you last logged in, and easily see what is new at a glance.
- Email notifications for threads you want to watch closely.
- Being a part of the oldest wargaming community on the net.
If you are already a member then feel free to login now. |
|
|
2021/09/27 17:40:18
Subject: Removing adhesive residue from models
|
|
Navigator
|
Hi. Has anyone for any tips for removing the sticky, shiny residue left by masking tape?
I did a terrible job of masking up a Sicaran. I can fix the paint issues but I don't know how to get rid of the sticky stuff.
|
This message was edited 1 time. Last update was at 2021/09/27 17:41:10
|
|
|
|
2021/09/27 18:41:18
Subject: Removing adhesive residue from models
|
|
Fixture of Dakka
|
Axlbush,
That is a rough one, as I assume your paint underneath is not sealed?
A very small soft cloth with soap and water is the easiest fix...but it may also remove some of the underlying layer.
Always use painters tape and be prepared to do touch up unless you have done a great job priming.
My two cents,
CB
|
|
|
|
|
2021/09/27 20:32:22
Subject: Removing adhesive residue from models
|
|
Navigator
|
Cheers, Cap
I will definitely get a proper painters tape before I next to some masking.
I actually just tried some lahmian medium on a bit of the sticky section. It seems to have removed the stickiness tho it has left a smudgey finish. Luckily I am planning on doing a fair bit of weathering on the tank so hopefully I can blend this in with the overall look
|
This message was edited 2 times. Last update was at 2021/09/27 20:37:07
|
|
|
|
2021/09/27 23:44:04
Subject: Removing adhesive residue from models
|
|
Fresh-Faced New User
|
Axlbush wrote:Cheers, Cap
I will definitely get a proper painters tape before I next to some masking.
I actually just tried some lahmian medium on a bit of the sticky section. It seems to have removed the stickiness tho it has left a smudgey finish. Luckily I am planning on doing a fair bit of weathering on the tank so hopefully I can blend this in with the overall look
I use a brand called Frogtape, its a bit expensive but it is excellent, far better than any other masking tape I've used.
|
|
|
|
2021/09/28 11:35:51
Subject: Re:Removing adhesive residue from models
|
|
Longtime Dakkanaut
|
Lighter fuel is good at removing tape gunk from surfaces, although I've no idea if it will react with the paint.
|
|
|
|
|
2021/09/29 01:37:11
Subject: Removing adhesive residue from models
|
|
Regular Dakkanaut
|
You can try a soft white eraser. I'd let the paint cure fully if possible first, as it's less likely to peel up in the process. Even at that, masking tape adhesive is a tougher beast than almost any acrylic. Acetone and alcohol will definitely get it off, but the paint will be a goner too.
Sometimes pressing and removing tape over adhesive spots can also help lift them off, but again there's a significant risk of tearing up the underlying acrylic. Given the original tape made it off I'd probably try this or the eraser before going with chemical options.
|
|
|
|
2021/09/29 01:51:08
Subject: Removing adhesive residue from models
|
|
Regular Dakkanaut
Tallarook, Victoria, Australia
|
Well unfortunately the best way of removing tape residue from a painted surface involves the use of a heat source like a heat gun and the original tape. You heat up the residue and use the original tape gently dabbing the adhesive away from the surface and back onto the tape substrate and into the original adhesive.
This is how I cleaned hundreds of meters of hardcore gaffer tape residue of painted stage decks
Probably not the best idea on resin kits...
|
This message was edited 1 time. Last update was at 2021/09/29 01:52:05
|
|
|
|
2021/09/29 02:23:41
Subject: Removing adhesive residue from models
|
|
Krazed Killa Kan
|
"Goo gone". Thats what it's designed for. Test on arylic paint on a bit of sprue first though as i have never used it on a model. Works great on getting stubborn adhesive residue off surfaces around my house.
|
|
|
|
|