Switch Theme:

GW: Moon Base Klaisus Battlefield In A Box. Pre-order Sept 30th, released Oct 7th.  [RSS] Share on facebook Share on Twitter Submit to Reddit
»
Author Message
Advert


Forum adverts like this one are shown to any user who is not logged in. Join us by filling out a tiny 3 field form and you will get your own, free, dakka user account which gives a good range of benefits to you:
  • No adverts like this in the forums anymore.
  • Times and dates in your local timezone.
  • Full tracking of what you have read so you can skip to your first unread post, easily see what has changed since you last logged in, and easily see what is new at a glance.
  • Email notifications for threads you want to watch closely.
  • Being a part of the oldest wargaming community on the net.
If you are already a member then feel free to login now.




Made in lt
Longtime Dakkanaut






I was excited, until I saw it's cardboard. Pass for me.

   
Made in fr
Longtime Dakkanaut




 Mad Doc Grotsnik wrote:
 Thargrim wrote:
I'd consider this for 35-45 dollars, these card things do not have the longevity of real boards or mats and can be scratched/dented with ease. I've got a big scratch on my blood bowl pitch and I have no clue how it got there or where from. It almost looks like someone dragged a plastic bladed weapon on it. And considering i've only used the pitch twice I think I should know how it got there. The thing is I don't have a clue. They are not very resilient to any abuse, and any moisture will shorten its lifespan pretty quickly...even a humid living environment.

So for me this needs to be 15 dollars or so cheaper than their actual battlemats.


Price wise, I'd go up to £50 I think.

Pour quoi? Well, it saves me an awful lot of faffing about compared to other boards. My intended surface isn't quite the full 6x4, which rules out battlemats without a based board. That of course pops the price up, and involves additional storage requirements.

And, I get a bit more scatter terrain. Far as I'm concerned, you can't have enough scatter terrain.

You plan on putting them on a table that's a tad smaller than 6x4?
I don't know if cardboard overhanging from the table edge will be stiff enough to play on.
   
Made in gb
Ridin' on a Snotling Pump Wagon






It's only slightly smaller. Overhang would be a couple of inches at most.

Fed up of Scalpers? But still want your Exclusives? Why not join us?

Hey look! It’s my 2025 Hobby Log/Blog/Project/Whatevs 
   
Made in es
Thrall Wizard of Tzeentch






It could be interesting...

So it's a card tiles board and plastic push-fit ruins?

I agree with the others, it could be very interesting if its price is reasonable, to play in stores.
   
Made in us
Did Fulgrim Just Behead Ferrus?





Fort Worth, TX

Are they also going to sell a rubber anti slip mat to keep the tiles from sliding all over the table every time you bump them?

"Through the darkness of future past, the magician longs to see.
One chants out between two worlds: Fire, walk with me."
- Twin Peaks
"You listen to me. While I will admit to a certain cynicism, the fact is that I am a naysayer and hatchetman in the fight against violence. I pride myself in taking a punch and I'll gladly take another because I choose to live my life in the company of Gandhi and King. My concerns are global. I reject absolutely revenge, aggression, and retaliation. The foundation of such a method... is love. I love you Sheriff Truman." - Twin Peaks 
   
Made in gb
Longtime Dakkanaut





 Tannhauser42 wrote:
Are they also going to sell a rubber anti slip mat to keep the tiles from sliding all over the table every time you bump them?


Given how cheap and readily available they are online, probably not.

Painting Warhammer 40,000 Conquest a P and M blog : https://www.dakkadakka.com/dakkaforum/posts/list/0/763491.page 
   
Made in ax
Missionary On A Mission






Was informed price will be £50 or €65.
Gamermat eu or some such sell double sided battle mats for like €50 unless I'm totally mistaken?

   
Made in es
Inspiring SDF-1 Bridge Officer






...right. Never mind then.
   
Made in gb
Longtime Dakkanaut





Gamemat.eu prices for their neoprene mats are as follows:

4x4 = £42. $43.50
6x4 = £59. $62
6x4 double sided =£96. $102

You have to factor in postage and packing, no scatter terrain and FLGS discount on the GW product on that as well.

Personally I was looking for the GW product to be £35 odd, will have to see it in person before deciding whether to buy.

This message was edited 1 time. Last update was at 2017/09/25 12:51:34


Painting Warhammer 40,000 Conquest a P and M blog : https://www.dakkadakka.com/dakkaforum/posts/list/0/763491.page 
   
Made in de
Huge Bone Giant






The ruins look nice. I hope they'll be available separately as well. Could be a nice addition for Necromunda to represent the less wealthy /and devout) underhive better than the city kits do.

Nehekhara lives! Sort of!
Why is the rum always gone? 
   
Made in nl
[MOD]
Decrepit Dakkanaut






Cozy cockpit of an Archer ARC-5S

The ruins do nicely fit in style-wise with the support struts of the previously released industrial terrain sets, maybe a taste of what's to come?



Fatum Iustum Stultorum



Fiat justitia ruat caelum

 
   
Made in de
Longtime Dakkanaut





At the Open Days GW/FW said there would be more. The fuel tanks in September WD seem to be one of these new kits.


This message was edited 1 time. Last update was at 2017/09/25 13:20:59


 
   
Made in gb
Frightening Flamer of Tzeentch




Manchester, England

 BrookM wrote:
The ruins do nicely fit in style-wise with the support struts of the previously released industrial terrain sets, maybe a taste of what's to come?


Fairly certain it states in the article that they were designed to be compatible stylistically, not sure if they're functionally compatible, however.
   
Made in au
Owns Whole Set of Skullz Techpriests






Versteckt in den Schatten deines Geistes.

Fuel tanks?

Industrial Insanity - My Terrain Blog
"GW really needs to understand 'Less is more' when it comes to AoS." - Wha-Mu-077

 
   
Made in nl
[MOD]
Decrepit Dakkanaut






Cozy cockpit of an Archer ARC-5S

Warhams-77 wrote:
At the Open Days GW/FW said there would be more. The fuel tanks in September WD seem to be one of these new kits.


I think those may be leftovers from when Forge World still did the trailer with fuel tank.



Fatum Iustum Stultorum



Fiat justitia ruat caelum

 
   
Made in us
Longtime Dakkanaut




 Gamgee wrote:
Yeah this looks like it has the possibility to be higher quality than a fat mat. I don't dislike fatmats but the texture on them isn't my thing. This looks like it's a next step up from that.


Unless its somehow foldable plastic...(which it is not) its not going to be as good as a fatmat. Its cardboard. Mousepad printed mats > cardboard every single time.

They can take mass use very easily such as spills or scuffing. You can also roll dice on fat mats and they wont bounce all over or vibrate and push minis around like a cardboard surface will (albeit its minor)

This could be a good value though price dependent.

My FLGS will know Weds but I'm sure we will see price before that
   
Made in gb
Ridin' on a Snotling Pump Wagon






 H.B.M.C. wrote:
Fuel tanks?


Wot he said.....fuel tanks?

Don't keep new terrain under yer hat! Shares!

Fed up of Scalpers? But still want your Exclusives? Why not join us?

Hey look! It’s my 2025 Hobby Log/Blog/Project/Whatevs 
   
Made in es
Inspiring SDF-1 Bridge Officer






So far, it makes Micro Art Studios' Terminus segments modular mousepad mats look like a decent alternative. They are more expensive (as it is 4x4 for about the same price), but a lot more modular.
   
Made in gb
Impassive Inquisitorial Interrogator




U.K.

i wonder if that new scenery will see more of it standalone? looks good but id like to see additional pieces/more

3 SPRUUUUUEESSSS!!!!
JWBS wrote:

I'm not going to re-read the lunacy that is the last few pages of this thread, but I'd be very surprised if anyone actually said that. Even that one guy banging on about how relatively difficult it might be for an Inquisitor to acquire power armour, I don't think even that guy said that.
 
   
Made in de
Longtime Dakkanaut





 BrookM wrote:
Warhams-77 wrote:
At the Open Days GW/FW said there would be more. The fuel tanks in September WD seem to be one of these new kits.

I think those may be leftovers from when Forge World still did the trailer with fuel tank.

Quite likely. I will take a photo later today if noone else is quicker with it. They are shown in the batrep, CSM vs Imperium.
   
Made in gb
[SWAP SHOP MOD]
Killer Klaivex







How is card more durable than mousepad material? It probably abrades from the clips after being disassembled a few hundred times.


 
   
Made in us
Stealthy Warhound Titan Princeps







I like moonbases on principle - always liked the idea behind Moon base CLAVIUS:



I like a battle in a box, especially at a reasonable Price.

Overall, the aesthetic is weak though. I kind of like the ruin bits for variety though, so maybe someday.


This message was edited 2 times. Last update was at 2017/09/25 14:58:54


 
   
Made in es
Longtime Dakkanaut





Warhams-77 wrote:
 BrookM wrote:
Warhams-77 wrote:
At the Open Days GW/FW said there would be more. The fuel tanks in September WD seem to be one of these new kits.

I think those may be leftovers from when Forge World still did the trailer with fuel tank.

Quite likely. I will take a photo later today if noone else is quicker with it. They are shown in the batrep, CSM vs Imperium.



Min 22.35


   
Made in us
Auspicious Aspiring Champion of Chaos






 Ketara wrote:
How is card more durable than mousepad material? It probably abrades from the clips after being disassembled a few hundred times.


Board games are typically played on cardboard. I've yet to have a decently-made game board fall apart, even those I break out twice a week or more.

2000 Khorne Bloodbound (Skullfiend Tribe- Aqshy)
1000 Tzeentch Arcanites (Pyrofane Cult - Hysh) in progress
2000 Slaves to Darkness (Ravagers)
 
   
Made in us
Automated Rubric Marine of Tzeentch





 EnTyme wrote:
 Ketara wrote:
How is card more durable than mousepad material? It probably abrades from the clips after being disassembled a few hundred times.


Board games are typically played on cardboard. I've yet to have a decently-made game board fall apart, even those I break out twice a week or more.


Yes, for me I think that these will be able to survive as well as any board game, however it's definitely going to be used more often than an average board game.

As far as I'm concerned, I'm able to bring a mat to life because it, like my miniatures, has a matte finish. If these tiles have a gloss finish that would definitely be a deal breaker. Not to mention I'd sooner buy a mat in the first place. The scatter terrain is really the only thing I'm interested in. I'm kind of surprised GW hasn't just done a scatter terrain party box by now. I hope they make one.
   
Made in us
Fixture of Dakka





Steelcity

I don't get why people would buy this over fatmats. Go to home Depot, buy 2x 6 foot folding tables and you're done. Those also function as tables for a variety of things. It's nice they include scatter terrain but you need about 10x that for a game of 8th Ed 40k.

Fiddling with cardboard squares seems so much more difficult than buying a roll out mat.

Keeper of the DomBox
Warhammer Armies - Click to see galleries of fully painted armies
32,000, 19,000, Renegades - 10,000 , 7,500,  
   
Made in gb
Shas'la with Pulse Carbine




Eastern Fringe

^ This When I first heard about it I was quite excited at the prospect of a board produced by GW but the more i think about it the more I dislike the cardboard tiles.

The first rule of unarmed combat is: don’t be unarmed. 
   
Made in gb
Ridin' on a Snotling Pump Wagon






Ok.

Weird. Seriously weird.

According to WD? It measures 5'6" x 3'4".....



That's a deal breaker for me, sadly :(

Fed up of Scalpers? But still want your Exclusives? Why not join us?

Hey look! It’s my 2025 Hobby Log/Blog/Project/Whatevs 
   
Made in au
[MOD]
Making Stuff






Under the couch

 Stormonu wrote:
Why does GW have an aversion to putting these things at a right angle so you can combine two or more of them together?.

For the same reason that most of the mat makers do it, and that so many gamers set their tables up at an angle - it's better for reducing fire lanes directly across the board.




 Kid_Kyoto wrote:
 Gamgee wrote:
There is one thing bothering me though. The moon the base is on. So they had these open air buildings on the moon or something? Is it breathable air there? It sure looks like it can't be with the craters though.

Edit
My only wish is they did it in desert and maybe a few other pallets.


I assume it's one of those alien moons with an atmosphere and Luna per se.

I may be misremembering, but isn't there a (thin) atmosphere on Luna in the 40K background?



 Mad Doc Grotsnik wrote:
Ok.

Weird. Seriously weird.

According to WD? It measures 5'6" x 3'4".....

I would suspect that it's a side effect of either printing size limitations on the card, or measurement conversion issues with China.

Or that's the size that fits into the box they wanted to use for it.

This message was edited 2 times. Last update was at 2017/09/26 01:43:31


 
   
Made in us
Longtime Dakkanaut




 Mad Doc Grotsnik wrote:
Ok.

Weird. Seriously weird.

According to WD? It measures 5'6" x 3'4".....



That's a deal breaker for me, sadly :(

It could just be foresight by gw to create a board that fits on MOST dining room tables. Very few tables are a full 6x4.
   
 
Forum Index » News & Rumors
Go to: