Switch Theme:

Troublemaker Games News - KICKSTARTER: Smallscale (~8mm) plastic terrain, 6mm Armies, STL 3d Sets.  [RSS] Share on facebook Share on Twitter Submit to Reddit
»
Author Message
Advert


Forum adverts like this one are shown to any user who is not logged in. Join us by filling out a tiny 3 field form and you will get your own, free, dakka user account which gives a good range of benefits to you:
  • No adverts like this in the forums anymore.
  • Times and dates in your local timezone.
  • Full tracking of what you have read so you can skip to your first unread post, easily see what has changed since you last logged in, and easily see what is new at a glance.
  • Email notifications for threads you want to watch closely.
  • Being a part of the oldest wargaming community on the net.
If you are already a member then feel free to login now.




Made in nl
Never Forget Isstvan!





The Netherlands

How about some Eloi terrain or ruins of Eloi terrain?

The Wars of Tusculum Nova - A Vanguard Miniatures fanblog 
   
Made in gb
Regular Dakkanaut





Today's update adds a new Base component, and a Large Cargo Lighter, to the STL 3d Download SET B.

   
Made in gb
Regular Dakkanaut





From today's Kickstarter campaign update:

Hello Backers, and Watchers!

For today's update, we'd like to announce an upgrade to our Novan Nuclear Wastes Specialists Set.

We've added a squad support heavy gun to the set, and also added two whole new sprues, containing five Ogroid Infantry (Two poses with portable Grenade Launchers, and three poses with Shields and Banhammers).

This raises the total number of metal cast figures/models in the set from 72, to 82.

Share the campaign to all your greatest enemies.

Thanks everyone!

- Ben @ TMG


   
Made in us
[MOD]
Keeper of the Adeptus Arbites Flame






Arlington, va

I hate to say it but I really think you should see about getting the shuttle cast up ASAP, that's the sort of amazing model that can make people open their wallets but most folks don't have or won't find 3d printers.

Sadly I won't be getting into this KS, too much backlog, but wow it is an amazing product and I hope it makes it.

 
   
Made in nz
[MOD]
Villanous Scum






 Kid_Kyoto wrote:
I hate to say it but I really think you should see about getting the shuttle cast up ASAP, that's the sort of amazing model that can make people open their wallets but most folks don't have or won't find 3d printers.


Very much this! I don't have access to a 3d printer and finding one locally is dicey but if that was available in resin or metal I would throw some money at it.

On parle toujours mal quand on n'a rien à dire.
Keeping the flame of Babylon 5 A Call to Arms alive, check it out;
Babylon 5 ACTA campaign log
Babylon 5 ACTA Painting log
 
   
Made in ca
Phanobi






Canada,Prince Edward Island



Anyone with a 3D printer who doesn't buy this set is a complete maniac in my opinion! Incredible work guys, everything looks fantastic!

Out of curiosity what printer would you guys recommend for your stuff? Doing a little math in my head you could buy your STL files, a printer, and get a fully furnished board for not a crazy crazy price!

I am guessing it would be prohibitively expensive to produce these things in resin as well correct? Probably worthy of its own kickstarter in any case!


In any case I pledged for just one little building now as I am trying to save money at the moment but I would love to see this project become a reality, good luck with everything!

Edit:

Ooh and I missed the latest update, that new ship looks great! What is the scale of that thing (not that it really matters if it is just a 3D file I guess..)

This message was edited 1 time. Last update was at 2019/06/29 02:51:16


   
Made in us
[DCM]
Courageous Space Marine Captain





SoCal

 Kid_Kyoto wrote:
I hate to say it but I really think you should see about getting the shuttle cast up ASAP, that's the sort of amazing model that can make people open their wallets but most folks don't have or won't find 3d printers.

Sadly I won't be getting into this KS, too much backlog, but wow it is an amazing product and I hope it makes it.


Depending on the size, I too would buy one in resin.

   
Made in gb
Regular Dakkanaut





 Commander Cain wrote:
Anyone with a 3D printer who doesn't buy this set is a complete maniac in my opinion! Incredible work guys, everything looks fantastic!

Out of curiosity what printer would you guys recommend for your stuff? Doing a little math in my head you could buy your STL files, a printer, and get a fully furnished board for not a crazy crazy price!

I am guessing it would be prohibitively expensive to produce these things in resin as well correct? Probably worthy of its own kickstarter in any case!

They've largely been designed as I typically design for matter printing for masters which would be printed for production, using support beams where necessary.

Larger pieces have been sectioned and hollowed to save material & bed space efficiency, and I'm happy to help out with a little bit more slicing if someone requested it.


Ooh and I missed the latest update, that new ship looks great! What is the scale of that thing (not that it really matters if it is just a 3D file I guess..)




This freighter is 84mm long.

I'm seriously considering doing it in resin, as well as 3d.

Who'd be interested?

This message was edited 2 times. Last update was at 2019/06/29 13:40:07


 
   
Made in nl
Never Forget Isstvan!





The Netherlands

I do kinda wonder how the crew enters that freighter, can you do a shot of a human next to that freighter?

The Wars of Tusculum Nova - A Vanguard Miniatures fanblog 
   
Made in dk
Hacking Interventor





Tyreso, Sweden

Backed for the freighter. Love the STL!!
   
Made in us
[MOD]
Keeper of the Adeptus Arbites Flame






Arlington, va

I'd be interested in a resin freighter, there's little to show scale so it would work in BFG too.

 
   
Made in us
[DCM]
Courageous Space Marine Captain





SoCal

How much would it cost in resin? Would it be similar to the resin Battlefleet Helios ships? I would be down for one.

This message was edited 1 time. Last update was at 2019/06/29 19:15:10


   
Made in us
Fixture of Dakka





West Michigan, deep in Whitebread, USA

 Kid_Kyoto wrote:
I'd be interested in a resin freighter, there's little to show scale so it would work in BFG too.


Yeah, I'm thinking it would be like some sort of Bulk Mover. At 84mm it would be, what...nearly Battleship sized??



"By this point I'm convinced 100% that every single race in the 40k universe have somehow tapped into the ork ability to just have their tech work because they think it should."  
   
Made in nz
[MOD]
Villanous Scum






Evil & Chaos wrote:

Who'd be interested?


I would get a couple.

On parle toujours mal quand on n'a rien à dire.
Keeping the flame of Babylon 5 A Call to Arms alive, check it out;
Babylon 5 ACTA campaign log
Babylon 5 ACTA Painting log
 
   
Made in us
[MOD]
Keeper of the Adeptus Arbites Flame






Arlington, va

 AegisGrimm wrote:
 Kid_Kyoto wrote:
I'd be interested in a resin freighter, there's little to show scale so it would work in BFG too.


Yeah, I'm thinking it would be like some sort of Bulk Mover. At 84mm it would be, what...nearly Battleship sized??


Nah, a light cruiser is 75mm (~3inches), a cruiser 90mm, a battleship is about 125mm/~5 inches.

So it would be good for a light cruiser or a heavy transport.

 
   
Made in gb
Regular Dakkanaut





Because you asked for it... From today's campaign update:


Hello Backers, and Watchers!

We've now hit 33.3333333% funded!

Because we're getting good takeup on the STL set pledges, that means our projected cost burden drops somewhat from our highest margin, and we can start unlocking a few physical model kits...

So, today's project update adds a new RESIN MODEL KIT to the Kickstarter: The Largo Cargo Lighter.

The Large Cargo Lighter is 85mm long, and will be supplied with one of our clear plastic bases.





Share the campaign to everyone on the planet, fifteen million times.

Thanks everyone!

- Ben @ TMG
   
Made in es
Skilled SDF-1 Pin-Point Barrier Jockey






I'm in for both STL sets right now, but I wouldn't really mind some physical stuff either, particularly some sweet, sweet Epic infantry...
   
Made in gb
Regular Dakkanaut





 Albertorius wrote:
I'm in for both STL sets right now, but I wouldn't really mind some physical stuff either, particularly some sweet, sweet Epic infantry...


Thanks Albertorius!
Hopefully the metal nuclear wastes infantry set(s) tempt you... maybe plus some ruined buildings for them to fight over...
   
Made in gb
Regular Dakkanaut





Hello Backers, and Watchers!

We've now hit 35% funded!

Today's new STL files to add to the 3D STL Download SET B are:

A Fuel Pod
A Fuel Barge variant of the Cargo Lighter
A Fuel Barge variant of the Large Cargo Lighter


Please Share the campaign to your pet goldfish, once every thirty seconds.

Thanks everyone!

- Ben @ TMG
[Thumb - 35.jpg]

[Thumb - a11.jpg]

   
Made in ca
Phanobi






Canada,Prince Edward Island

Looking good! Make sure to drop by the titanicus news thread to show off your terrain, I'm sure a good chunk of people would be very interested in some great looking scenery

   
Made in gb
Storm Trooper with Maglight





Back in the UK and hating it

This is all looking fantastic, it''l print up nicely for AT.

Also really happy with the Nuns I ordered, so ordered some more, hopefully get some paint on those and photographed before too long.

   
Made in si
Steady Stonecleaver







Does anyone have a size & quantity comparison with GW's Adeptus Titanicus terrain?

Posters on ignore list: 33

40k Potica Edition - 40k patch with reactions, suppression and all that good stuff. Feedback thread here.

Gangs of Nu Ork - Necromunda / Gorkamorka expansion supporting all faction. Feedback thread here
   
Made in nl
Never Forget Isstvan!





The Netherlands

 lord_blackfang wrote:
Does anyone have a size & quantity comparison with GW's Adeptus Titanicus terrain?


Regarding the plastic kits...

Totally unoffical here, this is purely for scaling purposes:


The Wars of Tusculum Nova - A Vanguard Miniatures fanblog 
   
Made in gb
Regular Dakkanaut





 lord_blackfang wrote:
Does anyone have a size & quantity comparison with GW's Adeptus Titanicus terrain?


The panels are larger - so if it's LOS-blocking terrain you're after, this would be the right stuff. :-)
   
Made in gb
Regular Dakkanaut





From today's Campaign Update:

Hello Backers, and Watchers!

Today's Update, adds Aethyr Generators to STL Set B.

These components consist of two Generator bases, and two blade spinners, meaning that you can mix-and-match to your bloodpump's content.

Share the campaign to stray dogs.

Thanks everyone!

- Ben @ TMG
[Thumb - u1.jpg]

   
Made in ca
Phanobi






Canada,Prince Edward Island

"In the grim darkness of the far future people will responsibly use renewable resources as deemed by Lord Inquisitor Attenborough"

I actually really want to build a 40K farmyard table now, big open plains combined with cramped alien cattle pens!

   
Made in nl
Never Forget Isstvan!





The Netherlands

I DEMAND ALIEN CATTLE!!!

The Wars of Tusculum Nova - A Vanguard Miniatures fanblog 
   
Made in gb
Regular Dakkanaut





From the campaign update:


Hello Backers, and Watchers!

Today's Update, adds a Bulk Dropship to STL Set B.
The forward rampway can be positioned opened or closed.


Share the campaign to stray dinosaurs... if you can find them.

Thanks everyone!

- Ben @ TMG


[Thumb - b1.jpg]

[Thumb - b2.jpg]

   
Made in nl
Never Forget Isstvan!





The Netherlands

You finally did it! :O

The Wars of Tusculum Nova - A Vanguard Miniatures fanblog 
   
Made in gb
Regular Dakkanaut





 Malika2 wrote:
You finally did it! :O


It only took like 8 years to finish this model. :-p
   
 
Forum Index » News & Rumors
Go to: