This is a pre-production limited numbers release of this figure set and contains 1 of each sprue type shown in the main image.

A full production set will be released in the not to distant future.

Restricted to one set per customer at this time.

Note that these are first generation master castings the very best castings you can get.

Figures represented are: Pilots and commanders both seated and on foot (some with small arms), technical drones and engineers.

sarcastro01 wrote:
check out https://talon.games/collections/cav-strike-operations-10mm-battlefield-terrain. I know I saw the kickstarter pics in an earlier post but the stuff is up for sale with them now. I have a few of the generator packs and they are great!

 Malika2 wrote:

sarcastro01 wrote:
check out https://talon.games/collections/cav-strike-operations-10mm-battlefield-terrain. I know I saw the kickstarter pics in an earlier post but the stuff is up for sale with them now. I have a few of the generator packs and they are great!

404 Page Not Found

The heavy ordnance bunker is designed to be built into terrain features for increased protection and concealment, the reinforced roof also provides excellent protection for the turret from enemy air attack Typically found near large military installations and other high value assets they are often well camouflaged and difficult to spot until they open fire.

This model kit consists of three resin cast bunker components and has been designed to take one of vanguards heavy ordnance turrets.

Turret and figure shown for scale only and is not included.

A set of three variant emplacements for use with my heavy ordnance turrets.

2 x ground level emplacements

1 x small bunker emplacement

Turrets and figure show for scale only and are not included.

Even in the future you need somewhere to put your rubbish.

Set contains:

4 x large waste bins with lids

8 x bins (2 variants)

4 x wheelie bins

Novan Elite and Regular shown for scale purposes only and is not included in this set.

A set of 30 x individual dragons teeth tank obstacles.

Novan Elite shown for scale purposes only and is not included in this set.

 Sherrypie wrote:
Now, I did not know I needed some waste bins for 6 mm gaming, buuuut...

 Malika2 wrote:

 Sherrypie wrote:
Now, I did not know I needed some waste bins for 6 mm gaming, buuuut...

We all need more 'cute' little 6mm terrain bits battlefields are more than just (ruined) buildings and factories. I hope these bits will sell well enough for Vanguard Miniatures to be convinced to put my other civilian terrain bits into productions...electric poles, cogitators, holodesks, grave stones, etc.

 Kid_Kyoto wrote:
Malika, great stuff as always!


Crablezworth, Z Gauge railway stuff (IIRC) might have the trucks and cars you're looking for.

 Malika2 wrote:
Would love to design some civilian cars, that would be pretty sweet!

PRINTED MODELS
A new venture for vanguard miniatures today sees the release of the first in hopefully a long line of 3D resin printed products.
The first releases are all terrain related, my old medium landing pad and heavy bunker previously available as resin casts, and two new products, a small balcony set and outrigger landing pad to enhance your building models.

A small landing pad that can be added to the side of a building or other structure.

Notes:

Model is 3D resin printed.
Print supports have been removed but some clean up may be required.
Model has been hollowed so hole filling may be required.
Figure show for scale purposes only and is not included.
Dimensions, W. 35mms H. 35mms

A set of two small 3D resin printed balconies to customise your building models.

Notes:

Print supports have been removed but some clean up will be necessary.
Figure show for scale purposes only and is not included.
Dimensions, small 20mm x 15mm x 5mm, large, 38mm x 15.5mm x 5mm.

A common hard landing pad design found on many Novan worlds.

Set contains one resin printed medium landing pad.

Notes:

Pad dimensions: 90mm wide, 5mm in height.
Print supports have been removed but some tidy up may be required.
Figure show for scale purposes only and is not included in this set.

The Novan heavy ordinance defence bunker can be found all across Tusculum Nova typically guarding the approaches to cities, starports and military installations. Variably armed and often found in mutually supporting positions alongside other defensive measures and garrisoned by a least a platoon of infantry these bunkers have proven there worth during countless conflicts.

Set contains:

1 x Resin printed bunker

1 x Resin cast heavy laser turret

1 x Resin cast heavy rotary cannon turret

1 x Metal radar dish

Notes:

Bunker dimensions: 125mm wide, 65mm depth, 15mm high, not including turrets or radar dish.
Print supports have been removed but some tidy up may be required.
Model has been hollowed so hole filling may be required.
Figure show for scale purposes only and is not included in the set.

The Novan Elites forward operating base (FOB) is a pre-fabricated modular fortification that can be assembled in many configurations. This set contains the components to assembly one configuration “A” structure with two gatehouses and four defence turret mounts. This model should see further modules released to expand on the theme and open up new layout options.

Set contains:

6 x plain walls

4 x walls with light turret positions

2 x gatehouses

2 x gates

1 x sentry turret sprue

Dimensions: 165mms square, wall height to top of parapet 24mms

Notes:

1) These models have been 3D resin printed and are hollow to reduce weight and material cost, print supports have been removed but some clean up may still be required.
2) Model has been designed to enable magnet use as desired.
3) Various miniatures show for scale purposes only, GW knight shown without permission.

This is an upgrade module for the Novan Elites forward operating base model, a heavy bunker that provides the FOB with a powerful multi-function dish.

Set contains:

1 x bunker

1 x bunker roof

I x dish

1 x dish turntable

Dimensions: bunker height not including the dish 45mms, 75mms long on a side, replaces three corner modules.

Notes:

1) All components are 3D resin printed.

2) Print supports have been removed but some tidy up may be required.

3) Some file work will be required to get the roof and dish to sit properly in there locations.

A set of 8 x resin cast gothic flying buttresses.

Limited edition product.

Notes:

Height: 36mms
Resin colour may vary