Switch Theme:

[Adeptus Titanicus] Report on your AT Projects!  [RSS] Share on facebook Share on Twitter Submit to Reddit
»
Author Message
Advert


Forum adverts like this one are shown to any user who is not logged in. Join us by filling out a tiny 3 field form and you will get your own, free, dakka user account which gives a good range of benefits to you:
  • No adverts like this in the forums anymore.
  • Times and dates in your local timezone.
  • Full tracking of what you have read so you can skip to your first unread post, easily see what has changed since you last logged in, and easily see what is new at a glance.
  • Email notifications for threads you want to watch closely.
  • Being a part of the oldest wargaming community on the net.
If you are already a member then feel free to login now.




Made in no
Longtime Dakkanaut






So the size of the token is not a point of fokus that has been mentioned by FAQs?




darkswordminiatures.com
gamersgrass.com
Collects: Flames of War/Tanks. Wings/Sails of Glory. Warmachine. SW Armada. Adeptus Titanicus. 
   
Made in fi
Longtime Dakkanaut






 FrozenDwarf wrote:
So the size of the token is not a point of fokus that has been mentioned by FAQs?



Not really, no. Crucible of Retribution and Open Cards recommend 32 mm bases for objective tokens and such, so that would most likely be just fine.

#ConvertEverything blog with loyalist Death Guard in true and Epic scales. Also Titans and killer robots! C&C welcome https://www.dakkadakka.com/dakkaforum/posts/list/717557.page 
   
Made in no
Longtime Dakkanaut






Last reaver is done, used the base from my very fist one that i sold, buyer dident want it.


darkswordminiatures.com
gamersgrass.com
Collects: Flames of War/Tanks. Wings/Sails of Glory. Warmachine. SW Armada. Adeptus Titanicus. 
   
Made in gb
Longtime Dakkanaut




Nottingham, UK

Having recently gained some assistance (and churned out a commission for Mantic) I've finally had a chance to finish painting up my Reaver for my Mortis lads (and a banner from Sets F and H).








The weird little bit on the banner pole mount is there for alignment lugs as the pole mount is magnetised (designed with sockets, magnets provided in the kit) at that point.


 
   
Made in ca
Longtime Dakkanaut





Ottawa Ontario Canada

Fantastic!

Do you play 30k? It'd be a lot cooler if you did.  
   
Made in fi
Longtime Dakkanaut






Those are indeed lovely, winterdyne.

For the first time since forever, I've also gotten some paint on my Cerastoi.





Just transfers, battle damage and bases to go before these eight are set to get blasted to smithereens by annoyed titans!

#ConvertEverything blog with loyalist Death Guard in true and Epic scales. Also Titans and killer robots! C&C welcome https://www.dakkadakka.com/dakkaforum/posts/list/717557.page 
   
Made in gb
Longtime Dakkanaut




Nottingham, UK

I like that chocolatey brown - what's that?

 
   
Made in gb
Rampaging Reaver Titan Princeps





Warwickscire

Been a while since I posted - here’s a couple of reaver chassis I’m working on. Just need to get some decent bases for them and, of course, weapons

This message was edited 1 time. Last update was at 2020/11/26 20:46:22


 
   
Made in fi
Longtime Dakkanaut






winterdyne wrote:
I like that chocolatey brown - what's that?


Vallejo Charred Brown base, 1-2 lighter blends on edges and a good wash with translucent Burnt Umber as well as Nuln Oil.

#ConvertEverything blog with loyalist Death Guard in true and Epic scales. Also Titans and killer robots! C&C welcome https://www.dakkadakka.com/dakkaforum/posts/list/717557.page 
   
Made in gb
Longtime Dakkanaut




Nottingham, UK

I have a very similar colour (Vallejo Model Color Chocolate Brown) but it separates like nobody's business.

 
   
Made in fi
Longtime Dakkanaut






I like the Game Color series, some bottles are years old and still work fine. The Burnt Umber, my current favorite for liquid talent over Agrax, is from their Model Air series and has a nice consistency for washing or glazing without diluting.

#ConvertEverything blog with loyalist Death Guard in true and Epic scales. Also Titans and killer robots! C&C welcome https://www.dakkadakka.com/dakkaforum/posts/list/717557.page 
   
Made in gb
Longtime Dakkanaut





Hot dog! Awesome paint job Winterdyne!

Stop it Zedmeister! Not falling for your inspiring work and purchasing another Reaver! Forget it!

Sherrypie...dammit those are handsome looking Cerastus. They look familar too...

This message was edited 1 time. Last update was at 2020/11/27 11:27:51


Casual gamer, casual fun! 
   
Made in fi
Longtime Dakkanaut






And they're done! Cheers SamusDrake.



Individual pics in the plog

#ConvertEverything blog with loyalist Death Guard in true and Epic scales. Also Titans and killer robots! C&C welcome https://www.dakkadakka.com/dakkaforum/posts/list/717557.page 
   
Made in fi
Longtime Dakkanaut






Previous pics were a bit dark, so I spent a good few hours today trying to get some better pics. The great northern darkness doesn't make it easy, nor does the lack of sensible lighting in my house








#ConvertEverything blog with loyalist Death Guard in true and Epic scales. Also Titans and killer robots! C&C welcome https://www.dakkadakka.com/dakkaforum/posts/list/717557.page 
   
Made in ca
Longtime Dakkanaut





Ottawa Ontario Canada

I love the little marine statues on that last lancer sherry.

zedmeister, your scheme is great, it reminds me of lowenbrau can for some reason

Spoiler:

This message was edited 5 times. Last update was at 2020/11/29 05:03:58


Do you play 30k? It'd be a lot cooler if you did.  
   
Made in us
Steady Space Marine Vet Sergeant




San Jose, CA

they look great Sherrypie!
   
Made in fi
Longtime Dakkanaut






Thanks guys!

Now that I have like twenty knights painted or something, they probably need a name for their household. Something tragic and sorrowful like their titan masters', whose uncaring bidding they must serve. Lacrimae, Tribulatio, something like that.

Keep it up, zedmeister, they're looking nice and minty

#ConvertEverything blog with loyalist Death Guard in true and Epic scales. Also Titans and killer robots! C&C welcome https://www.dakkadakka.com/dakkaforum/posts/list/717557.page 
   
Made in gb
Rampaging Reaver Titan Princeps





Warwickscire

Cheers gents, not sure about the beer compliment

Knights looking nice Sherrypie. Especially like the shield conversions
   
Made in ca
Longtime Dakkanaut





Ottawa Ontario Canada

 zedmeister wrote:
Cheers gents, not sure about the beer compliment

Knights looking nice Sherrypie. Especially like the shield conversions


The paint scheme is awesome, it was mostly the blue/cyan and gold that reminded me of the beer. Is it a custom legio?



New board setup with the forge fane.



Spoiler:



















This message was edited 1 time. Last update was at 2020/11/30 16:29:50


Do you play 30k? It'd be a lot cooler if you did.  
   
Made in gb
Rampaging Reaver Titan Princeps





Warwickscire

 Crablezworth wrote:


The paint scheme is awesome, it was mostly the blue/cyan and gold that reminded me of the beer. Is it a custom legio?


Thanks bud. They're actually Legio Krytos. Didn't like the washed out green in the paint schemes and tried to match mine closer to the colour plates in Titandeath. Hopefully, they'll see some much improved rules as they're pretty much bottom of the pile for Legio strength. Blowing away buildings is fun though...
   
Made in fi
Longtime Dakkanaut






 zedmeister wrote:
 Crablezworth wrote:


The paint scheme is awesome, it was mostly the blue/cyan and gold that reminded me of the beer. Is it a custom legio?


Thanks bud. They're actually Legio Krytos. Didn't like the washed out green in the paint schemes and tried to match mine closer to the colour plates in Titandeath. Hopefully, they'll see some much improved rules as they're pretty much bottom of the pile for Legio strength. Blowing away buildings is fun though...


Earthbreaker missiles are great though, especially on Reavers that can snipe Quake shenanigans all over the place. When Titandeath came out, one of my favourite tactics was to run Krytos Venators with a Gatling / Melta / Apoc leader, who could then either blast with the Melta if the targets the Hounds stripped were in sight or hit them with the Earthbreaker from anywhere on the table to bind them in place for other wings of the force to deal with.

Their "we don't care about Dangerous Terrain" stratagem can also be nice, if you know your fellows like to run Scatterable Mines a lot.

#ConvertEverything blog with loyalist Death Guard in true and Epic scales. Also Titans and killer robots! C&C welcome https://www.dakkadakka.com/dakkaforum/posts/list/717557.page 
   
Made in gb
Rampaging Reaver Titan Princeps





Warwickscire

 Sherrypie wrote:
Earthbreaker missiles are great though, especially on Reavers that can snipe Quake shenanigans all over the place. When Titandeath came out, one of my favourite tactics was to run Krytos Venators with a Gatling / Melta / Apoc leader, who could then either blast with the Melta if the targets the Hounds stripped were in sight or hit them with the Earthbreaker from anywhere on the table to bind them in place for other wings of the force to deal with.

Their "we don't care about Dangerous Terrain" stratagem can also be nice, if you know your fellows like to run Scatterable Mines a lot.


I do like Earthbreakers, but the single shot with a Reaver I always saw as a problem especially with my ability to always roll low. Though, last time, I did end up with a lucky Quake hit that knocked an offending Warlord direct into the arc of my Warlord with paired gatling blasters... I didn't consider firing off quake with the Venator free shot when blowing out shields. Nice way to slap them about a bit.

Must be nearly a year since I last played. Bloody lockdown...

This message was edited 1 time. Last update was at 2020/12/07 14:44:49


 
   
Made in fi
Longtime Dakkanaut






Single shot is a bit iffy, sure, but you only need to hit with Quake to have an effect. You can't smack people around, though, they only have Quake but not Concussive like the Mori would.

#ConvertEverything blog with loyalist Death Guard in true and Epic scales. Also Titans and killer robots! C&C welcome https://www.dakkadakka.com/dakkaforum/posts/list/717557.page 
   
Made in us
Jovial Plaguebearer of Nurgle





Albany, NY

Did anyone actually pick up the resin Knights so far? Curious to see pics of the parts and assembly.

   
Made in gb
Rampaging Reaver Titan Princeps





Warwickscire

 Prometheum5 wrote:
Did anyone actually pick up the resin Knights so far? Curious to see pics of the parts and assembly.


Got a pack each and they're pretty similar to the plastic knights in how they fit together. Cleanup is comparable as well. The cabling from the weapon to the Knight's reactor was a bit fiddly and one of the Magæra's needed the old hot water treatment to fit but otherwise fine. In fact, the Graviton Gun and Plasma Fusil mounts are a lot sturdier than the plastics.
   
Made in fi
Longtime Dakkanaut






Something big yet tiny today, painted the Ordinatus up finally. He's partly AT plastic and might occasionally end up as battlefield assets. Party hard with all the noise!




#ConvertEverything blog with loyalist Death Guard in true and Epic scales. Also Titans and killer robots! C&C welcome https://www.dakkadakka.com/dakkaforum/posts/list/717557.page 
   
Made in gb
Rampaging Reaver Titan Princeps





Warwickscire

Nice work. I love the Ordinatus and think they are a good candidate for an addition to the game and am hopeful Forgeworld will put them out.

For rules, they could be largely like Knights (in a detachment) but with some sort of simple plasma management.

The dispersion shield is a bit different and should diminish as the game goes on. So, turn 1 is 2+, 2 is 3+, 3 is 4+ and so on until a minimum of 5+ is reached.

For the weapons, the Belicosa we know. No idea on how you'd replicate the Sonic Disruptor - it's stupidly destructive in 30k.

This message was edited 2 times. Last update was at 2020/12/09 09:00:09


 
   
Made in gb
Wolf Guard Bodyguard in Terminator Armor





I think the addition of crawlers to the game should come with a new set of turning templates for the “short edge” of the oval bases so that they can be aligned along the long axis and moved that way. It would change the tactical considerations for them significantly with very little additional rules baggage.

"Three months? I'm going to go crazy …and I'm taking you with me!"
— Vala Mal Doran
 
   
Made in fi
Longtime Dakkanaut






Traditionally, in Epic they had void shields like titans. A minoris gun, like the Sonic Destroyer here, would probably be comparable to a Mori cannon. On a bigger majoris engine, the Sonic Disruptor exceeds the capabilities of Warlord level guns for the most part.

#ConvertEverything blog with loyalist Death Guard in true and Epic scales. Also Titans and killer robots! C&C welcome https://www.dakkadakka.com/dakkaforum/posts/list/717557.page 
   
Made in gb
Wolf Guard Bodyguard in Terminator Armor





 Sherrypie wrote:
Traditionally, in Epic they had void shields like titans. A minoris gun, like the Sonic Destroyer here, would probably be comparable to a Mori cannon. On a bigger majoris engine, the Sonic Disruptor exceeds the capabilities of Warlord level guns for the most part.

Originally, when the Ordinatus were first released back in Epic: Space Marine/Titan Legions they had an unmodifiable 1+ save that degraded by turns. Supposedly a combination of the void shield and power field technologies.
As for Majoris engines… yes, they were capable of mounting Imperator-grade weapon systems, or dismounted naval cannon. Only one each, though.

"Three months? I'm going to go crazy …and I'm taking you with me!"
— Vala Mal Doran
 
   
 
Forum Index » Games Workshop Board Games & Specialist Games
Go to: