Switch Theme:

Two Idiots 3D Printing Service - TIPS - NEWS  [RSS] Share on facebook Share on Twitter Submit to Reddit
»
Author Message
Advert


Forum adverts like this one are shown to any user who is not logged in. Join us by filling out a tiny 3 field form and you will get your own, free, dakka user account which gives a good range of benefits to you:
  • No adverts like this in the forums anymore.
  • Times and dates in your local timezone.
  • Full tracking of what you have read so you can skip to your first unread post, easily see what has changed since you last logged in, and easily see what is new at a glance.
  • Email notifications for threads you want to watch closely.
  • Being a part of the oldest wargaming community on the net.
If you are already a member then feel free to login now.




Made in us
[DCM]
Pious Warrior Priest





My happy place.

Natchdrek hero #2 from bigmrtong minis available now!

https://two-idiots-printing-service.myshopify.com/products/bigmrtong-minis-natchdreck-hero-2


I play: AOS Death, AOS Cities of Sigmar, 40K imperial soup.

Co-owner of Two Idiots Printing Service, a 3D printing service. 
   
Made in us
Courageous Space Marine Captain





SoCal

Are those creatures an homage to some fantasy series?

   
Made in us
[DCM]
Pious Warrior Priest





My happy place.

 BobtheInquisitor wrote:
Are those creatures an homage to some fantasy series?


Apparently some old fantasy artwork the sculptor likes. I'll dig out the information on it in a bit.

I play: AOS Death, AOS Cities of Sigmar, 40K imperial soup.

Co-owner of Two Idiots Printing Service, a 3D printing service. 
   
Made in us
[DCM]
Pious Warrior Priest





My happy place.

 lord marcus wrote:
We are celebrating one of our favorite creators this week. Until Monday the 5th, take 15% off orders of $25 or more for anything from the peculiar companions ranges - just check them out from the drop down at the top of our home page under the fantasy tab!

two-idiots-printing-service.myshopify.com/



Just to remind everyone on payday, as well as the halfway point approximately of the sale





Automatically Appended Next Post:
​Peculiar companions based army deals have now been added to the 15% off sale. please note the 9th age essence of war sets are not included.



code applies at checkout, no need to type anything in.



https://two-idiots-printing-service.myshopify.com/collections/army-deals​

This message was edited 2 times. Last update was at 2021/07/02 21:03:24


I play: AOS Death, AOS Cities of Sigmar, 40K imperial soup.

Co-owner of Two Idiots Printing Service, a 3D printing service. 
   
Made in us
Courageous Space Marine Captain





SoCal

Dang. Wish I could place an order this week.

   
Made in us
[DCM]
Pious Warrior Priest





My happy place.

The holy Roman empire line has been updated with ogres and characters and YES, they do count towards the flash sale. Get your orders in before Monday night to take advantage of 15% off

https://two-idiots-printing-service.myshopify.com/collections/peculiar-companions-holy-roman-empire-humans







This message was edited 3 times. Last update was at 2021/07/03 15:05:10


I play: AOS Death, AOS Cities of Sigmar, 40K imperial soup.

Co-owner of Two Idiots Printing Service, a 3D printing service. 
   
Made in us
[DCM]
Pious Warrior Priest





My happy place.

We have some great new miniatures from Caballero Miniatures now available on the webstore as 3D prints.

The highlight from this batch is the dismounted knights, linked below, but be sure to click through to the rest of the caballero range!

https://two-idiots-printing-service.myshopify.com/products/caballero-miniatures-dismounted-spanish-knights



Also, its the last day of the peculiar companions flash sale, so get your orders in before the 15% is gone!

I play: AOS Death, AOS Cities of Sigmar, 40K imperial soup.

Co-owner of Two Idiots Printing Service, a 3D printing service. 
   
Made in us
Discriminating Deathmark Assassin






I wonder if the hornblower is meant to be Roland. Now Roland was a Frankish knight, but according to the La Chanson de Roland he commanded the rearguard of Charlemagne's army which was ambushed in Roncevaux Pass and destroyed. The pass is on the border of what is now Spain and France.

Kings of War: Abyssal Dwarves, Dwarves, Elves, Undead, Northern Alliance [WiP], Nightstalkers [WiP]
Kings of War Historical: Macedonian [WiP]
Dropzone Commander: PHR
Kill Team: Deathwatch AdMech Necron

 
   
Made in us
[DCM]
Pious Warrior Priest





My happy place.

 Ancestral Hamster wrote:
I wonder if the hornblower is meant to be Roland. Now Roland was a Frankish knight, but according to the La Chanson de Roland he commanded the rearguard of Charlemagne's army which was ambushed in Roncevaux Pass and destroyed. The pass is on the border of what is now Spain and France.


Could be, or just could be a Spanish knight with a warhorn.

I guess the best way to find out is buy one and use it however you like! A diorama would be especially cool

I play: AOS Death, AOS Cities of Sigmar, 40K imperial soup.

Co-owner of Two Idiots Printing Service, a 3D printing service. 
   
Made in us
Discriminating Deathmark Assassin






 lord marcus wrote:
Could be, or just could be a Spanish knight with a warhorn.

I guess the best way to find out is buy one and use it however you like! A diorama would be especially cool
I like dioramas in museums, not for home use. My minis are meant for gaming, not display.

Oh, I'll probably get one eventually, and use him as Roland, as well as the questing knight you posted a few pages back.

Kings of War: Abyssal Dwarves, Dwarves, Elves, Undead, Northern Alliance [WiP], Nightstalkers [WiP]
Kings of War Historical: Macedonian [WiP]
Dropzone Commander: PHR
Kill Team: Deathwatch AdMech Necron

 
   
Made in eg
[MOD]
Keeper of the Adeptus Arbites Flame






Cairo, Egypt



Either you're going to convince me to buy a 3d printer, or a set of Blake's Seven DVDs.

 
   
Made in us
[DCM]
Pious Warrior Priest





My happy place.

 Kid_Kyoto wrote:


Either you're going to convince me to buy a 3d printer, or a set of Blake's Seven DVDs.


Why not just buy a set of those figures from us? It would be cheaper than a printer and you could paint them while you watch the DVDs?

I play: AOS Death, AOS Cities of Sigmar, 40K imperial soup.

Co-owner of Two Idiots Printing Service, a 3D printing service. 
   
Made in us
[DCM]
Pious Warrior Priest





My happy place.

Hello again everyone. Today we have an extra special release from Medbury miniatures. This time, it is the Warriors of the Frontier Kingdom. sword, spear, and bow variants, along with a command group and mounted knights. Here are a few selections:

https://two-idiots-printing-service.myshopify.com/products/copy-of-medbury-miniatures-frontier-kingdom-warriors-spears



https://two-idiots-printing-service.myshopify.com/products/medbury-miniatures-frontier-kingdom-command-pack



https://two-idiots-printing-service.myshopify.com/products/medbury-miniatures-frontier-kingdom-knights-spears





and for all the variants and everything else medbury miniatures, check out the medbury collection page:

https://two-idiots-printing-service.myshopify.com/collections/medbury-miniatures


I play: AOS Death, AOS Cities of Sigmar, 40K imperial soup.

Co-owner of Two Idiots Printing Service, a 3D printing service. 
   
Made in us
[DCM]
Pious Warrior Priest





My happy place.

https://two-idiots-printing-service.myshopify.com/products/peculiar-companions-armored-ogres?variant=40854399484073


I play: AOS Death, AOS Cities of Sigmar, 40K imperial soup.

Co-owner of Two Idiots Printing Service, a 3D printing service. 
   
Made in eg
[MOD]
Keeper of the Adeptus Arbites Flame






Cairo, Egypt

I was going to say $25 for STLs is a bit dear, but $25 for 9 physical ogres

 
   
Made in us
[DCM]
Pious Warrior Priest





My happy place.

 Kid_Kyoto wrote:
I was going to say $25 for STLs is a bit dear, but $25 for 9 physical ogres


That is correct, 24.99 for 9 physical printed models

I play: AOS Death, AOS Cities of Sigmar, 40K imperial soup.

Co-owner of Two Idiots Printing Service, a 3D printing service. 
   
Made in us
Courageous Space Marine Captain





SoCal

That’s less than $3 per ogre. Does that make them cheaper than Imperial Guardsmen?

   
Made in pl
Longtime Dakkanaut




Germany

 BobtheInquisitor wrote:
That’s less than $3 per ogre. Does that make them cheaper than Imperial Guardsmen?


Cadians are 45$ per 10, meaning 4.5$ per Guardsman.
Catachans are 35$ per 10, meaning 3.5$ per Guardsman.
Steel Legionnaires are also 35$, meaning 3.5$ per Guardsman.

So... yes, it does.

Games Workshop are not your friends. They are not a small dev trying their best. They are a multibillion dollar company making calculated decisions about how many costs they can cut, how lazy they can be about relases, and how much they can paywall. They will do it again. Stop giving them money for this. 
   
Made in us
[DCM]
Pious Warrior Priest





My happy place.

 Wha-Mu-077 wrote:
 BobtheInquisitor wrote:
That’s less than $3 per ogre. Does that make them cheaper than Imperial Guardsmen?


Cadians are 45$ per 10, meaning 4.5$ per Guardsman.
Catachans are 35$ per 10, meaning 3.5$ per Guardsman.
Steel Legionnaires are also 35$, meaning 3.5$ per Guardsman.

So... yes, it does.


Whoah, you could get a whole ogre army for those prices

Hi everyone,

Lord Marcus here from Two Idiots printing service. We here at TIPS wanted to do something special for Dakka Dakka members in relation to our current sale.

The current sale is 9 peculiar companion armored ogres (physical prints, so 9 physical models) for $24.99.

The following is our Dakka Special. Just mention you are a dakka dakka member in your order notes and we'll get the free captain added to your order.



Here's the link for the sale bundle

https://two-idiots-printing-service.myshopify.com/products/peculiar-companions-armored-ogres?_pos=1&_sid=2647f6f38&_ss=r&variant=40854399484073

Because everyone should have armored ogres in their collection.

This message was edited 1 time. Last update was at 2021/07/15 23:24:26


I play: AOS Death, AOS Cities of Sigmar, 40K imperial soup.

Co-owner of Two Idiots Printing Service, a 3D printing service. 
   
Made in us
[DCM]
Pious Warrior Priest





My happy place.

We have had a few inquiries and so want to clarify things

ARMORED MIGHT SALE:

The sale is on a bundle package of 9 physical miniatures. These are not STL files.

As noted by commenters above, this works out to less that $3 per physical ogre miniature.

All you need to do is go to the armored ogre page, click on the drop down and select the sale package.

This deal is not limited, so if you want to buy multiples you can.

DAKKA DAKKA SPECIAL:

For DAKKA members only, if you purchase two of the sale bundles and mention you are a DAKKA member in your cart notes, an ogre captain miniature ($5.50 value) will be added to your order free of charge.


Automatically Appended Next Post:
Happy Friday everyone.

We've shuffled a few things around the webstore and are working on implementing a tag system to make searches easier.

This message was edited 2 times. Last update was at 2021/07/17 02:24:49


I play: AOS Death, AOS Cities of Sigmar, 40K imperial soup.

Co-owner of Two Idiots Printing Service, a 3D printing service. 
   
Made in us
[DCM]
Pious Warrior Priest





My happy place.

Caballero Basque light cavalry up on the webstore

https://two-idiots-printing-service.myshopify.com/products/caballero-miniatures-basque-light-cavalry


I play: AOS Death, AOS Cities of Sigmar, 40K imperial soup.

Co-owner of Two Idiots Printing Service, a 3D printing service. 
   
Made in gb
[DCM]
Decrepit Dakkanaut




UK

those look really good,

makes me wish you weren't across an expensive ocean and import tax barrier

 
   
Made in us
[DCM]
Pious Warrior Priest





My happy place.

 OrlandotheTechnicoloured wrote:
those look really good,

makes me wish you weren't across an expensive ocean and import tax barrier


Group order with friends maybe? Share the load?

Last few days on the armored might sale by the way!

I play: AOS Death, AOS Cities of Sigmar, 40K imperial soup.

Co-owner of Two Idiots Printing Service, a 3D printing service. 
   
Made in us
[DCM]
Pious Warrior Priest





My happy place.

Last few days of the armored might sale. come get your armored ogres today!

ALSO

The peculiar companions giant has been added. We took this opportunity to test out some new drop downs. please let us know your thoughts on them and if they provided a better experience.

https://two-idiots-printing-service.myshopify.com/products/peculiar-companions-imperial-giant






I play: AOS Death, AOS Cities of Sigmar, 40K imperial soup.

Co-owner of Two Idiots Printing Service, a 3D printing service. 
   
Made in us
Nimble Pistolier




Baltimore, MD USA

That giant is really cool. I would order exactly like option 2… and the price is pretty good. I spent too much on the the 2nd wave reaper pledge manager, and the Scythian pledge manager…

But the armored ogres and the giant are on my list. Maybe next month… any word on whether you will offer an upgrade for pre-cleaned (support removed) options?

And approximately how tall is that giant? Wonder how he compares to the mantic giant or the new GW ones.
   
Made in pl
Longtime Dakkanaut




Germany

The giant looks... Really low-detail and somewhat awkwardly posed. Basically, like he was sculpted as a regular sized dude, with the amount of detail of a regular infantry mini, and then upscaled several times.

Games Workshop are not your friends. They are not a small dev trying their best. They are a multibillion dollar company making calculated decisions about how many costs they can cut, how lazy they can be about relases, and how much they can paywall. They will do it again. Stop giving them money for this. 
   
Made in us
[DCM]
Pious Warrior Priest





My happy place.

 Smokestack wrote:
That giant is really cool. I would order exactly like option 2… and the price is pretty good. I spent too much on the the 2nd wave reaper pledge manager, and the Scythian pledge manager…

But the armored ogres and the giant are on my list. Maybe next month… any word on whether you will offer an upgrade for pre-cleaned (support removed) options?

And approximately how tall is that giant? Wonder how he compares to the mantic giant or the new GW ones.


1. Support removal is on the website as an option under services. It's also in the revolving feature on the front page.

2. I can get a photo of this guy next to a ruler if you'd like. The little zwielhander guys at his feet are 28mm scaled.


Automatically Appended Next Post:
 Wha-Mu-077 wrote:
The giant looks... Really low-detail and somewhat awkwardly posed. Basically, like he was sculpted as a regular sized dude, with the amount of detail of a regular infantry mini, and then upscaled several times.


Thank you for your frank commentary. I can pass your comments along to the designer.

This message was edited 1 time. Last update was at 2021/07/21 02:04:06


I play: AOS Death, AOS Cities of Sigmar, 40K imperial soup.

Co-owner of Two Idiots Printing Service, a 3D printing service. 
   
Made in us
Nimble Pistolier




Baltimore, MD USA

 lord marcus wrote:
 Smokestack wrote:
That giant is really cool. I would order exactly like option 2… and the price is pretty good. I spent too much on the the 2nd wave reaper pledge manager, and the Scythian pledge manager…

But the armored ogres and the giant are on my list. Maybe next month… any word on whether you will offer an upgrade for pre-cleaned (support removed) options?

And approximately how tall is that giant? Wonder how he compares to the mantic giant or the new GW ones.


1. Support removal is on the website as an option under services. It's also in the revolving feature on the front page.

2. I can get a photo of this guy next to a ruler if you'd like. The little zwielhander guys at his feet are 28mm


scaled.


Automatically Appended Next Post:
 Wha-Mu-077 wrote:
The giant looks... Really low-detail and somewhat awkwardly posed. Basically, like he was sculpted as a regular sized dude, with the amount of detail of a regular infantry mini, and then upscaled several times.


Thank you for your frank commentary. I can pass your comments along to the designer.



Thanks, I had to do a search for services to find it. One thing… if I order 7 ogres.., which comes out to $30, the cost to clean the supports is $20? Ouch. Yeah, I will consider it, but it kind of puts it in the probably not zone. Unfortunately.
   
Made in us
[DCM]
Pious Warrior Priest





My happy place.

 Smokestack wrote:
 lord marcus wrote:
 Smokestack wrote:
That giant is really cool. I would order exactly like option 2… and the price is pretty good. I spent too much on the the 2nd wave reaper pledge manager, and the Scythian pledge manager…

But the armored ogres and the giant are on my list. Maybe next month… any word on whether you will offer an upgrade for pre-cleaned (support removed) options?

And approximately how tall is that giant? Wonder how he compares to the mantic giant or the new GW ones.


1. Support removal is on the website as an option under services. It's also in the revolving feature on the front page.

2. I can get a photo of this guy next to a ruler if you'd like. The little zwielhander guys at his feet are 28mm


scaled.


Automatically Appended Next Post:
 Wha-Mu-077 wrote:
The giant looks... Really low-detail and somewhat awkwardly posed. Basically, like he was sculpted as a regular sized dude, with the amount of detail of a regular infantry mini, and then upscaled several times.


Thank you for your frank commentary. I can pass your comments along to the designer.



Thanks, I had to do a search for services to find it. One thing… if I order 7 ogres.., which comes out to $30, the cost to clean the supports is $20? Ouch. Yeah, I will consider it, but it kind of puts it in the probably not zone. Unfortunately.


That's the set price. We are willing to work with our customers on those.

Ross wanted to get a price up and we based it on people buying infantry figs at our base $2.50 rate.

Throw me a private message or email at twoidiotsprinting@gmail.com when ready.


I play: AOS Death, AOS Cities of Sigmar, 40K imperial soup.

Co-owner of Two Idiots Printing Service, a 3D printing service. 
   
Made in us
Nimble Pistolier




Baltimore, MD USA

 lord marcus wrote:
Last few days of the armored might sale. come get your armored ogres today!

ALSO

The peculiar companions giant has been added. We took this opportunity to test out some new drop downs. please let us know your thoughts on them and if they provided a better experience.

https://two-idiots-printing-service.myshopify.com/products/peculiar-companions-imperial-giant







Per Facebook he is 150mm tall so slightly shorter than the mantic Giant but not by a lot.

This message was edited 1 time. Last update was at 2021/07/23 01:32:16


 
   
 
Forum Index » News & Rumors
Go to: